Advanced Search
JIA Lin, LI Zhuoxin, LI Hong, Wolfgang Tillmann. Influence of interlayer on the properties of Kovar / DM308 laser welded joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(11): 33-38. DOI: 10.12073/j.hjxb.2018390268
Citation: JIA Lin, LI Zhuoxin, LI Hong, Wolfgang Tillmann. Influence of interlayer on the properties of Kovar / DM308 laser welded joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(11): 33-38. DOI: 10.12073/j.hjxb.2018390268
shu

Influence of interlayer on the properties of Kovar / DM308 laser welded joint

More Information
  • Received Date: June 04, 2017
    Graphical Abstract
    • Abstract
  • Kovar alloy and DM308 glass were bonded with YLS-6000 fiber laser. The effect of interlayer on the strength, interface structure and interface bonding mechanism was investigated. The diffusion behavior of interface elements is analyzed. The results showed that the Mo-Mn-Ni interlayer can reduce the cracks at the edge of the joint,and Ni2O3-MnO2-B2O3 interlayer can reduce the number of micro cracks and the number of bubbles on the glass side. The weakest part of the 4J29 / DM308 laser welding joint is near the glass side, which breaks through the bubble. The biggest shear strength of Mo-Mn-Ni interlayer joints is 10.96 MPa. The biggest shear strength of Ni2O3-MnO2-B2O3interlayer joints is 13.46 MPa. The thickness of Ni2O3-MnO2-B2O3 interlayer transition layer is about 30-40 μm. There is obvious dendrite growth in the transition layer. The results of joint interface XRD phase analysis show that the interface transition layer is FeSiO3 and Fe7SiO10. It is belong to Fe and Si cubic complex oxides. The results of EDS analysis showed that Fe, Co, Ni, Al, Na and Si elements had diffused in the whole interface region. The interfacial bonding mainly depends on chemical reaction and element diffusion.
    • FullText(HTML)
    • References (15)
  • Pablos-Martín, A. Laser welding of glasses using a nanosecond pulsed Nd:YAG laser[J]. Optics & Lasers in Engineering, 2017, 90: 1 ? 9.
    聂　琴. 航天电连接器金属-玻璃封接工艺设计与材料微观组织的研究[D]. 沈阳: 东北大学材料物理与化学研究所, 2008.
    徐晓龙. 玻璃表面润湿性及其与铜的低温连接[D]. 哈尔滨: 哈尔滨工业大学, 2013.
    李卓然, 徐晓龙. 玻璃与金属连接技术研究进展[J]. 失效分析与预防, 2013(2): 123 ? 130
    Li Zhuoran, Xu Xiaolong. Review of bonding technology of glass to metal[J]. Failure Analysis and Prevention, 2013(2): 123 ? 130
    Lei D, Wang Z. Experimental study of glass to metal seals for parabolic trough receivers[J]. Renewable Energy, 2012, 48: 85 ? 91.
    Yan L, Yunzhou Z, Yong Y, et al. Microstructure of reaction layer and its effect on the joining strength of SiC/SiC joints brazed using Ag-Cu-In-Ti alloy[J]. Journal of Advanced Ceramics, 2014, 3(1): 71 ? 75.
    刘翠荣. 玻璃(陶瓷)与金属阳极键合界面结构及力学性能[D]. 太原: 太原理工大学, 2008.
    栗卓新, 铁 敏, 李 红, 等. 异种材料连接中表面预处理及对接头强度影响的研究进展[J]. 北京工业大学学报, 2015(1): 153 ? 160
    Li Zhuoxin, Tie Min, Li Hong, et al. Progress on surface pretreatment and its effects on the joint strength in dissimilar materials joining[J]. Journal of Beijing University of Technology, 2015(1): 153 ? 160
    聂海杰, 李 红, 龙伟民, 等. 采用冷喷铜涂层做中间层的镁合金与钢共晶接触反应钎焊工艺及接头性能[J]. 焊接学报, 2016, 37(7): 83 ? 87
    Nie Haijie, Li Hong, Long Weimin, et al. Contact reaction brazing process and joint properties of magnesium alloy and steel eutectic with cold sprayed copper coating as interlayer[J]. Transactions of the China Welding Institution, 2016, 37(7): 83 ? 87
    Chen H, Li L, Kemps R, et al. Reactive air brazing for sealing mixed ionic electronic conducting hollow fibre membranes[J]. Acta Materialia, 2015, 88: 74 ? 82.
    Guodong Z, Guanghua C. Direct welding of glass and metal by 1 kHz femtosecond laser pulses[J]. Journal of Applied Mechanics, 2015, 82(10): 8957 ? 8961.
    Carter R M, Chen J, Shephard J D, et al. Picosecond laser welding of similar and dissimilar materials[J]. Applied Optics, 2014, 53(19): 4233 ? 4238.
    铁 敏, 李 红, 栗卓新, 等. 硼硅玻璃与可伐合金的激光熔接工艺[J]. 焊接学报, 2016, 37(6): 55 ? 58
    Tie Min, Li Hong, Li Zhuoxin, et al. Direct laser fusion bonding process of borosilicate glass and Kovar alloy[J]. Transactions of the China Welding Institution, 2016, 37(6): 55 ? 58
    张九海, 何 鹏. 扩散连接接头行为数值模拟的发展现状[J]. 焊接学报, 2000, 21(4): 84 ? 91
    Zhang Jiuhai, He Peng. Numeric simulation for diffusion bonding[J]. Transactions of the China Welding Institution, 2000, 21(4): 84 ? 91
    Schütt H J. Space-charge relaxation in ionicly conducting oxide glasses. I. Model and frequency response[J]. Journal of Non-Crystalline Solids, 1992, 144(1): 1 ? 13.
    • Related Articles

  • Related Articles

    [1]ZHU Qiang, XIA Yang, ZHANG Xingyue, HAN Ke, YAN Yaojing, DING Yuanyi, LEI Yucheng. Effect of Cu/V multi-interlayer on the microstructure and mechanical properties of TC4/IN718 joint by laser welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2024, 45(7): 34-40. DOI: 10.12073/j.hjxb.20230714002
    [2]WANG Gang, CAO Xuelong, TAN Caiwang, JIANG Junjun, XING Chang. Effect of Ni/Si interlayer on microstructure and properties of laser welded aluminum/steel joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(4): 84-89. DOI: 10.12073/j.hjxb.20191022001
    [3]JIA Lin1,3, LI Hong1, LI Zhuoxin1, Wolfgang Tillmann2. Effect of process parameters on laser welded joint bonding properties between Kovar alloy and DM308 glass[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(5): 5-9. DOI: 10.12073/j.hjxb.2018390111
    [4]TIE Min, LI Hong, LI Zhuoxin, JIA Lin. Direct laser fusion bonding process of borosilicate glass and Kovar alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(6): 55-58,74.
    [5]TIE Min, LI Hong, LI Zhuoxin, WOLFGANG Tillmann. Effect on wettability of borosilicate glass on kovar alloy using electron beam surface texturing[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(5): 61-64.
    [6]WANG Hongyang, ZHANG Zhaodong, CAO He. Laser-TIG-adhesive hybrid welding of magnesium to steel with Ni alloy interlayer[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(4): 83-86.
    [7]CHEN Shuhai, HUANG Jihua, YANG Dongdong, MA Ke, ZHANG Hua. Influence of Ni-foil interlayer on laser penetration welding of stainless steel to aluminium alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (8): 9-12.
    [8]LIN Xiaochao, CAO Jian, ZHANG Lixia, Feng Jicai. Microstructure and mechanical properties of ZrO2 ceramic and kovar brazed joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (9): 65-68.
    [9]NIU Jitai, LU Jinbin, MU Yunchao, LUO Xiangwei. Brazing of aluminum matrix composites SiCp/ZL101 to Kovar alloy 4J29[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (5): 37-40.
    [10]LIU Cuirong, MENG Qingsen, HU Lifang, HU Minying. Microstructure and bonding mechanism of anodic bonded interface between pyrex glass and kovar alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (2): 73-76.

Catalog

    Get Citation
    XML
    Article views (602) PDF downloads (1) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return