Advanced Search
Wenji Liu, Zhenyu Guan, Liangyu Li, Jianfeng Yue. Development of a narrow gap welding experiment system for oscillating arc sensing[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION.
Citation: Wenji Liu, Zhenyu Guan, Liangyu Li, Jianfeng Yue. Development of a narrow gap welding experiment system for oscillating arc sensing[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION.
shu

Development of a narrow gap welding experiment system for oscillating arc sensing

  • Advanced Mechatronics Equipment Technology Tianjin Area Laboratory, Tianjin Polytechnic University, Tianjin 300387, China

More Information
  • Received Date: February 03, 2018
  • Available Online: July 12, 2020
    Graphical Abstract
    • Abstract
  • In order to improve the precision and reliability of welding arc sensor in narrow gap, as well as to research the principle of arc sensor characteristic parameters influenced by the distance between welding torch and the side wall, by measuring the torch position using high precision laser displacement sensor, an experiment system for swing arc sensor which can simultaneously acquire welding voltage, welding current, welding torch swing position and arc image four signals was developed based on TMS320F2812 and Labview. Experiment was carried out by the welding method of P-GMAW. It was proved by the experiment that the established system is reliable and effective. The system has laid the necessary foundation for the further study of the characteristics of the narrow gap oscillating arc sensing.
    • FullText(HTML)
    • References (10)
  • 曾松盛, 石永华, 王国荣. 基于电弧传感器的焊缝跟踪技术现状与展望[J]. 焊接技术, 2008, 37(2): 1 − 5. doi: 10.3969/j.issn.1002-025X.2008.02.001

    Zeng Songsheng, Shi Yonghua, Wang Guorong. Current status and prospect of welding seam tracking based on arc sensors[J]. Welding Technology, 2008, 37(2): 1 − 5. doi: 10.3969/j.issn.1002-025X.2008.02.001
    贾剑平, 张 华, 徐健宁. 焊接电弧传感器的研究现状与展望[J]. 焊接, 2005(11): 14 − 18. doi: 10.3969/j.issn.1001-1382.2005.11.003

    Jia Jianping, Zhang Hua, Xu Jiannig. Research status and prospect of welding arc sensors[J]. Welding, 2005(11): 14 − 18. doi: 10.3969/j.issn.1001-1382.2005.11.003
    姚河清, 祁 涛, 姚诗涛, 等. 摆动式焊缝自动跟踪电弧传感器的研制[J]. 机电工程技术, 2009, 38(3): 21 − 23. doi: 10.3969/j.issn.1009-9492.2009.03.010

    Yao Heqing, Qi Tao, Yao Shitao, et al. The swing type welding seam automatic tracking arc sensor is developed[J]. Mechanical and Electrical Engineering Technology, 2009, 38(3): 21 − 23. doi: 10.3969/j.issn.1009-9492.2009.03.010
    Wenji, L iu, Liangyu, L i, Jianfeng, Y ue, et al. Research on the “jump sidewall” behavior and its signal characteristics in narrow gap P-MAG welding[J]. International Journal of Advanced Manufacturing Technology, 2017, 91(1–4): 1189 − 1196. doi: 10.1007/s00170-016-9796-5
    刘文吉, 段瑞彬, 岳建锋, 等. 窄间隙P-MAG焊电弧行为及信号传感特征分析[J]. 焊接学报, 2018, 39(6): 24 − 28.

    Liu Wenji, Duan Ruibin, Yue Jianfeng, et al. Analysis of Arc Behavior and Signal Sensing Characteristics of Narrow Gap P-MAG Welding[J]. Transactions of the China Welding Institution, 2018, 39(6): 24 − 28.
    黎文航, 孙丹丹, 杨 峰, 等. 新型窄间隙MAG旋转电弧传感焊缝偏差提取算法[J]. 材料科学与工艺, 2011, 19(6): 48 − 52.

    Li Wenhang, Sun Dandan, Yang Feng, et al. A new type of welding deviation extraction algorithm based on rotating arc sensor for narrow gap MAG welding[J]. Material Science and Technology, 2011, 19(6): 48 − 52.
    黎文航, 王加友, 杨 峰, 等. 窄间隙焊缝跟踪旋转电弧电流平均值传感法比较研究[J]. 江苏科技大学学报(自然科学版), 2009, 23(3): 209 − 212. doi: 10.3969/j.issn.1673-4807.2009.03.006

    Li Wenhang, Wang Jiayou, Yangfeng, et al. Research on arc sensing method of verage current for narrow gap rotating method[J]. Journal of Jiangsu University of Science & Technology (Natural Science Edition), 2009, 23(3): 209 − 212. doi: 10.3969/j.issn.1673-4807.2009.03.006
    Lopes G T. Arc-based sensing in narrow groove pipe welding[D]. Cranfield University, 2006.
    胡 胜, 罗 雨, 焦向东, 等. 摆动电弧传感器及其信号处理[J]. 上海交通大学学报, 2016, 50(S1): 59 − 61.

    Hu Sheng, Luo Yu, Jiao Xiangdong, et al. Oscillating arc sensor and its signal processing[J]. Journal of Shanghai Jiao Tong University, 2016, 50(S1): 59 − 61.
    黎文航, 王加友. 基于VC的旋转电弧窄间隙MAG焊多信息融合焊缝跟踪系统[J]. 焊接, 2014(10): 30 − 33. doi: 10.3969/j.issn.1001-1382.2014.10.007

    Li Wenhang, Wang Jiayou. Narrow gap MAG multi information fusion welding seam tracking system based on VC rotating arc[J]. Welding, 2014(10): 30 − 33. doi: 10.3969/j.issn.1001-1382.2014.10.007
    • Related Articles

Catalog

    Get Citation
    PDF
    XML
    Article views (519) PDF downloads (43) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return