Advanced Search
SHU Shuangwen, ZHOU Guoyan, CHEN Xing. Experimental study on mechanical properties of 316L brazed joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(12): 83-86.
Citation: SHU Shuangwen, ZHOU Guoyan, CHEN Xing. Experimental study on mechanical properties of 316L brazed joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(12): 83-86.
shu

Experimental study on mechanical properties of 316L brazed joints

  • Key Laboratory of Pressure Systems and Safety(MOE), School of Mechanical and Power Engineering, East China University of Science & Technology, Shanghai 200237, China

More Information
  • Received Date: December 10, 2014
    Graphical Abstract
    • Abstract
  • The mechanical properties of 316L brazed joints were studied by using high temperature tensile test and mathematical model analysis. To get a good understanding of the failure mechanism of brazed structure, the microstructures of crack tip and brazed seamwere studied. The results indicate that the load-displacement curves match the process of crack initializing and propagating clearly. And the suitable testing rate range is 1mm/min~2mm/min. Furthermore, the concentration phenomenon of Fe is the main cause of the fracture in plate-fin structure.
    • FullText(HTML)
    • References (11)
  • 蒋文春, 巩建鸣, 涂善东, 等. 304不锈钢钎焊板翅结构疲劳断裂机理分析[J]. 焊接学报, 2010, 31(4):45-48. Jiang Wenchun, Gong Jianming, Tu Shandong, et al. Analysis of fatigue fracture mechanism for brazed 304 stainless steel plate-fin structure[J]. Transactions of the China Welding Institution, 2010, 31(4):45-48.
    吴娜, 李亚江, 王娟, 等. Super-Ni/NiCr叠层材料Ni-Cr-Si-B高温钎焊接头的组织特征及抗剪强度[J]. 焊接学报, 2014, 35(1):9-12. Wu Na, Li Yajiang, Wang Juan, et al. Microstructure and shear strength of high-temperature brazed joint of Super-Ni/NiCr laminated composite using Ni-Cr-Si-B filler metal[J]. Transactions of the China Welding Institution, 2014, 35(1):9-12.
    文静, 王春生, 徐国成, 等. 不锈钢电阻点焊过程中的动态电阻变化规律分析[J]. 焊接学报, 2008, 29(11):69-72. Wen Jing, Wang Chunsheng, Xu Guocheng, et al. Analysis on dynamic resistance in resistance spot welding of stainless steel[J]. Transactions of the China Welding Institution, 2009, 29(11):69-72.
    陈兴, 舒双文, 周帼彦, 等. 基于内聚力模型的T形钎焊接头裂纹扩展数值模拟[J]. 压力容器, 2014(8):7-13. Chen Xing, Shu Shuangwen, Zhou Guoyan, et al. Numerical simulation of crack propagation of T-type brazed joints based on cohesive zone model[J]. Pressure Vessel Technology, 2014(8):7-13.
    Soltani Tashi R, Akbari Mousavi S A A, Mazar Atabaki M.Diffusion brazing of Ti-6Al-4V and austenitic stainless steel using silver-based interlayer[J]. Materials & Design, 2014, 54(2):161-167.
    Nishi H, Araki T, Eto M.Diffusion bonding of alumina dispersion-strengthened copper to 316L stainless steel with interlayer metals[J]. Fusion Engineering and Design, 1998, 39-40(98):505-551.
    Tu S T, Segle P, Gong J M, et al. Creep damage and fracture of weldments at high temperature[J]. Int. J. Pres. Ves. and Piping, 2004, 81(2):199-209.
    Rabinkin A. Optimization of brazing technology, structural integrity, and performance of multi-channeled three dimensional metallic structures[M]. Honeywell International, 2003.
    Jiang W, Gong J M, Tu S T, et al. Fatigue life prediction of a stainless steel plate-fin structure using equivalent-homogeneous-solid method[J]. Materials & Design, 2011, 32(10):4936-4942.
    Georgion I, Hadavinia H, Ivankovic A, et al. Cohesive zone models and the plastically deforming peel test[J]. The Joumal of Adhesion, 2003, 79(3):239-265.
    Kawashita L F, Moore D R, Williams J G, et al. Protocols for the measurement of adhesive tracture toughness by peel tests[J]. The Journal of Adhesion, 2006, 82(82):973-995.
    • Related Articles

  • Related Articles

    [1]MA Qiang, CHEN Mingxuan, MENG Junsheng, LI Chengshuo, SHI Xiaoping, PENG Xin. Microstructure and wear resistance of TiB2/Ni composite coating on pure copper surface by argon arc cladding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2021, 42(9): 90-96. DOI: 10.12073/j.hjxb.20210202002
    [2]YIN Yan, LI Zhihui, LI Hui, LI Zhiheng, LU Chao, ZHANG Ruihua. High-temperature wear resistance of Co-based cladding layers by ultra-high speed laser cladding on the surface of the cast-rolling roller sleeve[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2021, 42(9): 81-89. DOI: 10.12073/j.hjxb.20210122001
    [3]WANG Kai, JIAO Xiangdong, ZHU Jialei, LI Jingyang, DU Shixuan. Effect of laser power density on wear resistance of TC4 alloy manufactured by SLM[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(5): 61-64. DOI: 10.12073/j.hjxb.20190926001
    [4]WANG Chenglei, GAO Yuan, ZHANG Guangyao. Microstructure and wear resistanced of deposited rare earth CeO2+Ni60 alloys coatings on 6061 Al alloys by laser cladding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(7): 13-16.
    [5]ZHANG Song, ZHOU Lei, HAO Yuxi, ZHANG Chunhua, WANG Dongsheng, WANG Maocai. Microstructure,friction and wear properties of Ni-based alloy coating on Monel alloy substrate by laser cladding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (1): 9-12.
    [6]WANG Zhenting, DING Yuanzhu, LIANG Gang. Microstructure and wear resistance of in-situ synthesis TiB2-TiN particulates of composite coating reinforced titanium alloy surface by argon arc cladding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (12): 105-108.
    [7]ZHANG Song, WANG Mingsheng, ZHANG Kaixiang, ZHANG Chunhua, YAN Yonggen. CoNiCrAlY alloy deposited on surface of SCH13 steel by laser cladding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (5): 49-52.
    [8]LI Fuquan, CHEN Yanbin, LI Liqun. Microstructure and wear property of surface modification layer produced by laser melt injection WC on Q235 steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (4): 28-32.
    [9]ZHANG Chunhua, ZHANG Zhuo, ZHANG Song, HAN Zhong, MAN Hauchung. Fretting wear behavior of laser surface melted NiTi shape memory alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (7): 22-24,28.
    [10]YAN Yonggen, SI Songhua, ZHANG Hui, HE Yizhu. Microstructure and wear resistance of laser cladding Co+Ni/WC alloy composite coating[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (7): 21-24.

Catalog

    Get Citation
    PDF
    XML
    Article views (350) PDF downloads (211) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return