Advanced Search
ZHANG Lixia, TIAN Chenglong, TIAN Xiaoyu, FENG Jicai, SHI Junmiao, LIANG Yingchun. Research on vacuum brazing of C/C-Re composite to Nb[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(12): 47-50.
Citation: ZHANG Lixia, TIAN Chenglong, TIAN Xiaoyu, FENG Jicai, SHI Junmiao, LIANG Yingchun. Research on vacuum brazing of C/C-Re composite to Nb[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(12): 47-50.
shu

Research on vacuum brazing of C/C-Re composite to Nb

  • 1.

    State Key Lab of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China

  • 2.

    State Key Lab of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China;Shandong Provincial Key Laboratory of Special Welding Technology, Harbin Institute of Technology (Weihai), Weihai 264209, China

  • 3.

    School of Mechanical and Electrical Engineering, Harbin Institute of Technology, Harbin 150001, China

More Information
  • Received Date: March 16, 2014
    Graphical Abstract
    • Abstract
  • The vacuum brazing of C/C-Re composite toNbwas successfully performed with the brazing fillers of Zr-Ni (atomic ratio 64:36) powder. The results show that the interface structures of joints with Zr-Ni fillers each has a total of four reaction layers. The microstructure of the C/C-Re/Zr-Ni/Nb joints is C/C-Re composite /Re/ (Re,Zr,Nb)+NiZr/NiZr2+NiZr/NiZr+Nb/Nb.Through dissolution process, the Re(Rhenium) coating became thinner and the (Re,Zr,Nb) solid solution increased. The joint mechanical properties are evaluated through joint shear strength test, and the conclusions are that the shear strength ofjoints rose up at first and then declined with the increase of brazing temperature and the extending of holding time.The optimum welding parameters are that the brazing temperature is 1 110 ℃ and the holding time is 20 min. Under the optimum welding parameters, the maximum environment temperature shear strength of joints with Zr-Ni fillers is 19 MPa.
    • FullText(HTML)
    • References (7)
  • Cao J, Wang H Q, Qi J L, et al. Combustion synthesis of TiAl internetallics and their simultaneous joining to carbon/carbon composites[J]. Scripta Materialia, 2011, 65(3): 261-264.
    秦优琼,冯吉才,张丽霞. C/C复合材料与TC4钎焊接头的组织与断裂形式分析[J]. 焊接学报, 2007, 28(3): 13-16. Qin Youqiong, Feng Jicai, Zhang Lixia. Microstructure and fracture properties of carbon /carbon composite and TC4 titanium alloy joint[J]. Transactions of the China Welding Institution, 2007, 28(3): 13-16.
    田晓羽, 亓钧雷, 张丽霞, 等. BNi2+TiH2复合钎料钎焊C/C复合材料与GH99镍基高温合金[J]. 焊接学报, 2014, 35(5): 35-38. Tian Xiaoyu, Qi Junlei, Zhang Lixia, et al. Brazing of C/C composite and GH99 superalloy Using BNi2+ TiH2 composite filler powder[J]. Transactions of the China Welding Institution, 2014, 35(5): 35-38.
    黄 超, 林铁松, 何 鹏, 等. TiBw/TC4钛合金与C/C复合材料钎焊接头[J]. 焊接学报, 2007, 32(7): 39-42. Huang Chao, Lin Tiesong, He Peng, et al. Microsturcture of TiBw /TC4 alloy and C/C composite brazed joint[J]. Transactions of the China Welding Institution, 2011, 32(7): 39-42.
    Salvo M, Casalegno V. Study of joining of carbon/carbon composites for ultra stable structures[J]. Journal of the European Ceramic Society, 2010, 30(7): 1751-1759.
    Wang Houqin, Cao Jian, Feng Jicai. Brazing mechanism and infiltration strengthening of C/C composites to TiAl alloys joint[J]. Scripta Materialia, 2010, 63(8): 859-862.
    Chen Zhaofeng, Wu Wangping, Cheng Han. Microstructure and evolution of iridium coating on the C/C composites ablated by cxyacetylene torch[J]. Acta Astronautica, 2010, 66(6): 682-687.
    • Related Articles

  • Related Articles

    [1]LU Jinbin, HE Yaxun, ZHANG Wangxi, LI Hua, ZHAO Bin, YIN Zhen, MA Jia. Analysis on vacuum brazing diamond using CuSnTiNi[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2017, 38(6): 125-128.
    [2]ZHU Chengjun, SHANG Changpei. Vacuum brazing of MgAl2O4 transparent ceramics with AgCuTi active filler metal[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(4): 101-105.
    [3]FENG Guangjie, LI Zhuoran, Xu Kai, LIU Wenbo. Interface microstructure and mechanism of SiC ceramic vacuum brazed joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(1): 13-16.
    [4]WU Na, LI Yajiang, WANG Juan. Microstructure and properties of vacuum brazed joint between super-Ni/NiCr laminated composite and Cr18-Ni8 steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (3): 41-44.
    [5]LU Jinbin, TANG Feng, MENG Pu, WANG Zhixin. Thermal damage analysis of vacuum brazing diamond with Ni-Cr alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (8): 25-28.
    [6]LU Jinbin, MU Yunchao, MENG Pu. Analysis on vacuum brazing of CBN grits with Ti-base filler[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (5): 57-60.
    [7]CHEN Yan, XU Hongjun, FU Yucan, SU Honghua. Surface graphitization on brazed diamond with Ni-Cr alloy in vacuum brazing[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (9): 21-24.
    [8]ZHANG Jie, XU Xiaojing, DAI Fengze. Vacuum brazing of SiCp/Cu composite[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (9): 87-90.
    [9]LIANG Ning, SHENG Yifu. Influence of active element Mg on joint properties of aluminum alloy vacuum brazing[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (7): 61-64.
    [10]WANG Quanzhao, LIU Yue, ZHANG Yuzheng, GUAN Dehui, BI Jing. Vacuum brazing between TiC NiCr cermets and 1Cr13 stainless steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (8): 43-46.

Catalog

    Get Citation
    PDF
    XML
    Article views (517) PDF downloads (220) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return