Advanced Search
CUI Haipo, CHENG Enqing. Random vibration analysis of QFP with different structure parameters[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(11): 21-24.
Citation: CUI Haipo, CHENG Enqing. Random vibration analysis of QFP with different structure parameters[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(11): 21-24.

Random vibration analysis of QFP with different structure parameters

More Information
  • Received Date: February 24, 2014
  • Random vibration responses of QFP with different structure parameters were analyzed based on the ABAQUS software. The stress distributions of whole packaging and solder joints were obtained. The influence regularities of different lead widths, lead distances and lead heights on the stress field of QFP have been studied. The results indicate that, under the random vibration loading, the solder joints are weak components of QFP. The maximum stress focuses on the sharp corner of exterior part of the solder joints. Stress concentration areas locate at that position and the junction of lead with solder joint, which will be the most likely failure regions. The maximum stress of QFP is in direct proportion to the distance and height of lead and in inverse proportion to the width of lead.
  • 韦何耕, 黄春跃, 梁 颖, 等. 热循环加载条件下 PBGA叠层无铅焊点可靠性分析[J]. 焊接学报, 2013, 34(10): 91-95. Wei Hegeng, Huang Chunyue, Liang Ying, et al. Reliability analysis of plastic ball grid array double-bump lead-free solder joint under thermal cycle[J]. Transactions of the China Welding Institution, 2013, 34(10):91-95.
    Chawla N. Thermal fatigue behavior of Sn-rich (Pb-free) solders[J]. Metallurgical and Materials Transactions A, 2008, 39A: 799-810.
    尹立孟, Michael P, 位 松, 等. 焊点高度对微尺度焊点力学行为的影响[J]. 焊接学报, 2013, 34(8): 27-34. Yin Limeng, Michael P, Wei Song, et al. Effect of joint height on the mechanical behaviors of micro-scale solder joints[J]. Transactions of the China Welding Institution, 2013, 34(8): 27-34.
    Ubachs R, Schreurs P, Geers M. Elasto-viscoplastic nonlocal damage modeling of thermal fatigue in anisotropic lead-free solder[J]. Mechanics of Materials, 2007, 39(7): 685-701.
    王 欢, 杨 平, 谢方伟, 等. 复合加载下焊点寿命的数值模拟[J].焊接学报, 2012, 33(12): 65-68. Wang Huan, Yang Ping, Xie Fangwei, et al. Study on life-prediction of solder joint under combined loading[J]. Transactions of the China Welding Institution, 2012, 33(12): 65-68.
    Tan V B C, Tong M X. Finite element modeling of electronic packages subjected to drop impact[J]. IEEE Transactions on Components and Packaging Technologies, 2005, 28(3): 555-560.
    Lai Y S, Wang T H. Optimal design towards enhancement of board-level thermal mechanical reliability of wafer-level chip scale packages[J]. Microelectronics Reliability, 2007, 47(1): 104-110.
    Vandevelde B, Degryse D, Beyne E, et al. Modified micro macro thermo-mechanical modeling of ceramic ball grid array packages[J]. Microelectronics Reliability, 2003, 43(2): 307-318.
    Lim C T, Teo Y M, Shim V P W. Numerical simulation of the drop impact response of a portable electronic product[J]. IEEE Transactions on Components and Packaging Technologies, 2002, 25(3): 478-485.
    盛 重. QFP焊点可靠性研究及其热循环疲劳寿命预测[D]. 南京: 南京航空航天大学, 2010.
    林家浩, 张亚辉. 随机振动的虚拟激励法[M]. 北京:科学出版社, 2004.
  • Related Articles

    [1]WANG Shiyu1,2, LI Zhuoran1, ZHANG Zhao2, HOU Zhaobin3. Process and diffusion analysis on contact reactive brazing of Mg/Cu/Al[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(1): 13-16. DOI: 10.12073/j.hjxb.2018390004
    [2]GUO Zhu, ZHU Hao, CUI Shaopeng, WANG Yanhong. Finite element simulation of friction stir welding temperature field and residual stress field of 7075 aluminum alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(2): 92-96.
    [3]LEI Zhenglong, CHEN Yanbin, LV Tao, DIAO Wangzhan, SUN Zhongshao, CHEN Jilun. Effect of energy arrangement on temperature field and stress field in dual-beam laser welding process with filler wire[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (11): 83-88.
    [4]LIU Xuesong, YAN Dejun, YANG Jianguo, FANG Hongyuan. Effect of thermo-mechanical parameters on hump feature of welding residual stress by finite element analysis[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (7): 27-30,34.
    [5]YAN Dejun, LIU Xuesong, YANG Jianguo, FANG Hongyuan. Effect of thermophysical parameters on the hump feature of welding residual stress by finite element analysis[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (6): 56-60.
    [6]XIE Fei-hong, LUO Guan-wei, WANG Xu-guang. A numerical calculation on contact surface stress field of metals explosive welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (10): 26-28,93.
    [7]ZHOU Jian-xin, XU Hong, WANG Jun-sheng, LI Dong-cai, ZHANG Li, LIU A-long. Effect of specimen dimension on welding residual stresses[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (3): 96-100.
    [8]DONG Ping, CHEN Yu-ze, ZOU Jue-sheng. Effect of preheat on temperature and stress fields of laser brazingfusion welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2004, (3): 79-81.
    [9]LI Xiao-gang, Lü Bi-feng, YAO Wei-wei, XUE Ji-ren. Study on contacting line of two intersecting pipes in welding assembly[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2003, (4): 39-42.
    [10]YANG Qing-xiang, LI Yan-li, ZHAO Yan-hui, YAO Mei. Computer Simulation of Residual Stress Field of Hardfacing Metal and Effect of Specimen Dimension[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2001, (3): 44-46.

Catalog

    Article views (550) PDF downloads (204) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return