Citation: | BAI Jiantao, LI Zhuoxin, LI Yang, WOLFGANG Tillmann. Investigation on influence of iron/feld spar in flux cored wire for stainless steel on hexavalent chromium in welding fume[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(4): 35-38,55. |
American Welding Society. Laboratory methods for measuring fume generation rates and total fume emissions of welding and allied processes (F1.2-79)[S]. Miami, FL:American Welding Society, 1979.
|
Myers J M, Antholine W E, Myers C R. Hexavalent chromium causes the oxidation of thioredoxin in human bronchial epithelial cells[J]. Toxicology, 2008, 246(2):222-233.
|
Occupational Safety, Health Act (OSHA). Occupational exposure to hexavalent chromium[S]. Washington:OSHA, 2006.
|
Meeker J D, Susi P, Flynn M R. Hexavalent chromium exposure and control in welding tasks[J]. Journal of Occupational and Environmental Hygiene, 2010, 7(11):607-615.
|
Emmanuel B, Champagne. Coatedelectrode with low fume emission and low hexavalent chromium for welding stainless steels:USA, 20050189337[P]. 2005-09-1.
|
张清辉,吴宪平,洪波.焊接材料研制理论与技术[M].北京:冶金工业出版社, 2002.
|
Bosworth M R, Deam R T. Influence of GMAW droplet size on fume formation rate[J]. Journal of Physics D:Applied Physics, 2000, 33(20):2605.
|
程俊峰,徐明厚,曾汉才.高温下Cr的氧化动力学研究[J].中国电机工程学报, 2002, 22(8):135-138. Cheng Junfeng, Xu Minghou, Zeng Hancai, et al. A study of oxidation dynamics of chromium at high temperature[J]. Proceeding of the CSEE, 2002, 22(8):135-138.
|
Schnick M, Füssel U, Hertel M, et al. Metal vapor causes a central minimum in arc temperature in gas-metal arc welding through increased radiative emission[J]. Journal of Physics D:Applied Physics, 2010, 43(2):001-005.
|
[1] | LIU Xiyang<sup>1,2</sup>, SUN Fenglian<sup>1</sup>, ZHAO Yumin<sup>2</sup>, XU Kegui<sup>2</sup>, WANG Yizhe<sup>2</sup>. Analysis of arc stability of self-shielded flux-cored wire laser-arc hybrid[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(7): 17-23. DOI: 10.12073/j.hjxb.2018390167 |
[2] | WU Laijun, LIU Yibo, CHENG Wenqian, SUN Qingjie, WANG Jianfeng. Ultrasound-assisted underwater wet welding process[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(12): 33-36. |
[3] | CHEN Dongsheng, CHEN Maoai, WU Chuansong. Effect of phase difference on arc stability and weld quality of tandem P-GMAW[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(4): 119-123. |
[4] | ZHU Zhiming, FAN Kaiguo, WANG Yongdong, LIU Han. Effect of low atmospheric pressure on weld formation of arc welding with self-shielded flux-cored wire[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(2): 1-5. |
[5] | ZHANG Tianli, LI Zhuoxin, JING Hongyang, LI Guodong, LI Hong, SONG Shaopeng. Analysis and evaluation of arc stability of self-shielded fluxcored wire in all-position welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(8): 99-102. |
[6] | LI Xiaoquan, YANG Zonghui, ZHAO Zhiguo. Analysis of improving stability of welding technology by applying auxiliary electric field between slag and metal[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(1): 17-20. |
[7] | SHI Yonghua, ZHENG Zepei, HUANG Jin. Arc stability of underwater wet flux-cored arc welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (10): 49-53. |
[8] | WANG Wei, WANG Xu-you, ZHAO Zi-liang, LENG Kai-bo, BU Da-chuan. Influential factors in laser-MAG hybrid welding process[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (2): 6-10. |
[9] | Jiao Xiangdong, Pan Jiluan, Zhang Hua. A. C. MAG Welding Arc Stability and Its Control[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1998, (1): 49-55. |
[10] | Ding Wei, Hou Qixian, Dong Lingxuan, Wang Yuanliang. Arc Stability of Aluminium Alloy Pulsed MIG Welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1996, (2): 116-121. |
1. |
席保龙,张峻铭,邓小龙,徐顺鑫,刘燕,杨璟瑜,王洪亚. 焊接烟尘中铬元素含量的研究与进展. 电焊机. 2022(05): 47-54 .
![]() |