Advanced Search
XU Qingzhong, LI Fangyi, DING Tao, LI Feng. Experimental analysis on cold-welding surface residual stress of HT250[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (10): 33-36,40.
Citation: XU Qingzhong, LI Fangyi, DING Tao, LI Feng. Experimental analysis on cold-welding surface residual stress of HT250[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (10): 33-36,40.

Experimental analysis on cold-welding surface residual stress of HT250

More Information
  • Received Date: December 11, 2011
  • Cold-welding technology has been applied to the engine remanufacturing field.In this paper, the surface defect of HT250 castiron used in diesel engine cylinder was repaired with inferior-laser instantaneous melting cold-welding technology.The cold-welding residual stress was measured through the X-ray diffraction method to study the regularity of residual stress and the relationship between the residual stress and different process parameters.The results show that the stress near the weld seam is tensile and the stress away from the weld seam is compressive.The cold welding residual stress distribution is quite narrow.The peak stress mainly distributes in the range of 5mm from the weld seam center and the residual stress is close to zero in the place of 20 mm away from the weld seam center.Time parameter has little influence on the peak stress while the energy parameter's influence is great.Through the change of time and energy, smaller residual peak stress can be obtained to meet the repair requirements for surface damage on engine remanufacturing parts.
  • Related Articles

    [1]ZOU Yirong, WU Zheming, GUO Guilin, DU Dong. Image processing algorithm for weld seam recognition based on color analyzing[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (10): 37-40.
    [2]LIU Xiaogang, XIE Cunxi, ZHANG Changnian, XU Jiayuan. Acqusition and processing of seam image based on reflected arc light[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (4): 73-76.
    [3]ZHANG Peng-xian, CHEN Jian-hong, DU Wen-jiang. Quality monitoring of resistance spot welding based on image processing of welding spot surface[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (12): 57-60,64.
    [4]LI Yuan, XU De, SHEN Yang, TAN Min. A image processing and features extraction method for structured light image of welding seam[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (9): 25-30.
    [5]LIU Xi-wen, WANG Guo-rong, SHI Yong-hua. Image processing in welding seam tracking based on single-stripe laser[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (6): 25-28,32.
    [6]LI Lai-ping, LIN Tao, CHEN Shan-ben. Research on shape from shading in welding pool topside height acquisition[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (5): 5-8.
    [7]WANG Qing-xiang, SUN Bing-da, LI Di. Image processing method for recognizing position of welding seam[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (2): 59-63.
    [8]GU Chun-yan, ZHANG Li-bin, HU Bao-jian, LIU Chao-ying, HUANG Wei. Application of image processing automatic tracking of CO2 arc welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2004, (4): 70-72.
    [9]SUN Li-xin, DAI Shi-jie, LI Kai, HAN Wei, CAI He-gao. Research on the Image Processing of Multi-pass Seam Based on Line Structure Light[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2002, (3): 53-55,70.
    [10]ZHAO Dong-bin, CHEN Shan-ben, WU Lin, CHEN Qiang. Shape Parameter Definition and Image Processing of the Weld Pool during Pulsed GTAW with Wire Filler[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2001, (2): 5-8.
  • Cited by

    Periodical cited type(14)

    1. 曹鹏娟,王明泉,范涛,朱榕榕,刘嘉宇. 基于改进U-Net的球栅阵列气泡缺陷检测方法. 机械与电子. 2023(01): 20-24+29 .
    2. 姚远. 基于UNet深度可分离残差网络的BGA焊点分割方法. 现代信息科技. 2023(19): 69-74 .
    3. 冯辰越,黄慧,马燕. 一种基于X射线成像的球栅网格阵列封装芯片焊接检测方法. 上海师范大学学报(自然科学版). 2021(04): 408-412 .
    4. 须颖,刘永斌,安冬,邵萌. 基于X射线的BGA空洞缺陷3D检测方法. 沈阳建筑大学学报(自然科学版). 2020(01): 155-162 .
    5. 赵红雷. 基于一维卷积神经网络焊缝缺陷X射线图像的分类方法研究. 河南化工. 2020(10): 22-25 .
    6. 胡家兴,景博,黄以锋,盛增津,陈垚君,张钰林. QFP封装互连结构电气特性建模与退化分析. 电子学报. 2019(02): 366-373 .
    7. 张俊生,王明泉,郭晋秦,楼国红. 球栅阵列焊点空洞缺陷的数学形态学分析. 科学技术与工程. 2018(02): 296-299 .
    8. 卓辉,韩跃平,郭静. 基于X射线的气缸套缺陷检测研究. 自动化技术与应用. 2018(02): 93-96+106 .
    9. 张俊生,王明泉,郭晋秦,楼国红. BGA焊点气泡缺陷X射线图像的动态阈值分割方法. 火力与指挥控制. 2018(10): 113-116 .
    10. 张俊生,王明泉,王玉,王军,郭晋秦. BGA焊点空洞缺陷的数字形态学检测(英文). Journal of Measurement Science and Instrumentation. 2017(02): 199-204 .
    11. 李涛,闫焉服,王广欣,高世军. 球化介质对球栅阵列封装钎焊球质量的影响. 机械工程材料. 2017(10): 28-32 .
    12. 王飞,朱建江. 机器视觉在复杂环境下焊接缺陷检测的应用研究. 焊接技术. 2017(05): 127-133 .
    13. 张俊生,王明泉,郭晋秦,楼国红. BGA焊点空洞缺陷的定量分析. 热加工工艺. 2017(15): 187-189 .
    14. 李涛,闫焉服,高世军. 激振喷射工艺参数对BGA焊球直径的影响. 焊接技术. 2016(05): 38-40+44 .

    Other cited types(13)

Catalog

    Article views (227) PDF downloads (201) Cited by(27)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return