Advanced Search
DONG Zhibo, MA Rui, WANG Yong, ZHAN Xiaohong, WEI Yanhong. Post-data treatment design of software package for three dimensional simulation and prediction of weld solidification cracks[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (3): 17-20.
Citation: DONG Zhibo, MA Rui, WANG Yong, ZHAN Xiaohong, WEI Yanhong. Post-data treatment design of software package for three dimensional simulation and prediction of weld solidification cracks[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (3): 17-20.
shu

Post-data treatment design of software package for three dimensional simulation and prediction of weld solidification cracks

  • 1.

    State Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin 150001, China

  • 2.

    Shanghai Xin Li Institute of Power Equipment, Shanghai 200125, China

  • 3.

    School of Material Science and Technology, Nanjing University of Aeronautics & Astronautics, Nanjing 210016, China

  • 4.

    State Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin 150001, China;School of Material Science and Technology, Nanjing University of Aeronautics & Astronautics, Nanjing 210016, China

More Information
  • Received Date: November 10, 2009
    Graphical Abstract
    • Abstract
  • A software package has been developed which can simulate and predict the weld solidification cracks with three dimensional FEM.It consists of pre-processing,post-processing and solidification cracks predicting subsystem.The post-data treatment of software package for three-dimensional simulation and prediction of the weld solidification cracks can deal with the calculated results and display the results in featured curves,contours and 3D figures by combining graphic functions of softwares.The solidification cracks predicting subsystem regresses to the experimental data of trans-varestraint test(TVT) to obtain the material resistance curve of weld solidification cracks or reads the modified material resistance of simulating TVT from the database and has it compared with the one and thus predict the weld metal solidification cracks.
    • FullText(HTML)
    • References (0)
    • Related Articles

  • Related Articles

    [1]YANG Jianguo, LEI Jing, HE Yanming, ZHANG Tong, GAO Zengliang. Quiet element method of C276 alloy plate multi-pass welding based on finite element method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(12): 27-30,84.
    [2]WU Ying, ZHANG Peng, XIE Yanping. Stress analysis of plain dent on pipeline based on finite element method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (1): 57-60.
    [3]ZHU Song, ZHOU Zhenping, QIU Xiaoming. Finite element modeling of residual stress in bonding interface of Ni-Cr/porcelain[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (2): 45-48,52.
    [4]LI Guo, GONG Jianming, CHEN Hu. Finite element analysis and nanoindentation-based experiment of residual stress of SS304/BNi-2/SS304 stainless steel brazed joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (7): 79-82,86.
    [5]CHEN Hu, GONG Jian-ming, GENG Lu-yang, TU Shan-dong. Finite element analysis of residual stresses and thermal deformation for brazing plate-fin structure[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (11): 29-32,36.
    [6]JIANG Wen-chun, GONG Jian-ming, CHEN Hu, TU Shan-dong. 3-D finite element analysis of welding residual stress for halfpipe jacket made of 304 stainless steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (10): 77-80.
    [7]DONG Jun-hui, LIN Yan, LIN Wen-guang, YAO Qing-hu. Finite element analysis on welding residual stresses of thick wall pipe of heat resistant steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (2): 25-27,36.
    [8]LIU Min, CHEN Shi-xuan, CHEN Yong, KANG Ji-dong. Finite element for analysing EBW residual stress in titanium alloy plates[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2004, (6): 62-65.
    [9]CHEN Fu-rong, HUO Li-xing, ZHNAG Yu-feng, LIU Fang-jun, CHEN Gang. Finite element calculation of residual stresses on electron beam welded BT20 plates[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2004, (1): 61-64,70.
    [10]REN Wei-jia, WU Ai-ping, ZHAO Hai-yan, ZOU Gui-sheng. Finite Element Method Analysis on Welding Residual Stresses of Large Electromotor Rotor[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2002, (2): 92-96.

  • Cited by

    Periodical cited type(5)

    1. 贾爱亭，洪波，李湘文，高佳篷，吴格飞，屈原缘. 基于轨迹在线识别的3D折线焊缝机器人摆动GMAW实时跟踪方法. 机械工程学报. 2022(14): 116-125 .
    2. 孙银生，贺艳娜，田国豪. 四自由度焊接机械手臂运动学建模与轨迹规划. 机械工程与自动化. 2020(05): 163-166 .
    3. 袁文剑，柯尊荣，毛志伟，李向春. 一种新型爬壁焊接机器人的焊缝跟踪控制. 南昌大学学报(工科版). 2019(02): 173-177+182 .
    4. 张迪，马德志，宋晓峰，段斌. 机器人焊接技术在钢结构行业的应用. 焊接. 2019(07): 15-20+65-66 .
    5. 洪波，尹力，李毅，李湘文. 基于激光位移传感器的角焊缝位姿检测. 中国机械工程. 2017(24): 3013-3016+3023 .

    Other cited types(13)

Catalog

    Get Citation
    PDF
    XML
    Article views (201) PDF downloads (68) Cited by(18)
    Turn off MathJax
    Article Contents
    Abstract
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return