Advanced Search
WANG Xinhui, YU Dan, YANG Kefei, MENG Zhaolin. Analysis of intersection surface welding motion simulation based on Pro/Engineer[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (2): 72-76.
Citation: WANG Xinhui, YU Dan, YANG Kefei, MENG Zhaolin. Analysis of intersection surface welding motion simulation based on Pro/Engineer[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (2): 72-76.
shu

Analysis of intersection surface welding motion simulation based on Pro/Engineer

  • Harbin Welding Institute, China Academy of Machinery Science & Technology, Harbin 150080, China

More Information
  • Received Date: October 26, 2010
    Graphical Abstract
    • Abstract
  • In the development process of automatic welding equipment which is used for the complex inner surface welding in petroleum drill special-purpose valve,the mathematic model of valve inner surface intersection curve was modeled,and the motion trajectory of welding gun was planned.The 3D model of the welding equipment based on Pro/Engineer working environment was established,the definition of the motion jointing and the parameters of servo motors were set,the virtual prototype motion simulation experiment of the welding equipment was run,the motion trajectory curve was created,and the simulation errors was analyzed.The correctness of modeling the mathematic model was validated,which provided the simulation technology supporting of virtual prototype for developing and manufacturing the welding equipment.
    • FullText(HTML)
    • References (0)
    • Related Articles

  • Related Articles

    [1]WANG Hao, ZHAO Xiaohui, XU Longzhe, JIANG Hao, LIU Yu. Research on trajectory recognition and control technology of structured light vision-assisted welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2023, 44(6): 50-57. DOI: 10.12073/j.hjxb.20220715002
    [2]KONG Jianshou, QIAO Fei, LIU Siyi. Computer simulation of weld formation based on Bezier curve[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(5): 37-42. DOI: 10.12073/j.hjxb.2018390118
    [3]SHI Lei, TIAN Xincheng. Model and simulation of automatic intersecting curve welding with main pipe rotating welding scheme[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(6): 5-8.
    [4]ZHAI Jingmei, YING Can, ZHANG Tie, XU Xiao. Optimization on two cooperative robot arms' trajectory for welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(1): 91-95.
    [5]DAI Shijie, ZHANG Yi, WANG Zhiping, XING Zhiwei. Trajectory planning of welded repair for aero-engine blades based on NURBS curve[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(1): 23-26.
    [6]SHAO Yuanyuan, XUAN Guantao, LIU Jing, HOU Jialin. Reverse-driving trajectory planning of welding robot with NURBS[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(6): 9-12.
    [7]WANG Tianqi, LI Liangyu, YUE Jianfeng. Continuous trajectory model of intersecting joint welding robot based on groove feature[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (1): 65-68.
    [8]WANG Yu, WANG Qihua, ZHAO Jianguang, ZHANG Zhaolong. Research on welding robot trajectory and motion simulation based on virtual prototype technology[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (4): 109-112.
    [9]ZHOU Youhang, ZHANG Jianxun, DONG Yinsong. An optimization algorithm for combination inverse kinematics problems of welding robot in complex trajectory[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (9): 21-24.
    [10]Shi Yuxiang. A NEW METHOD FOR ANALYSING HYDROGEN PERMEATION CURVES[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1988, (3): 195-203.

  • Cited by

    Periodical cited type(2)

    1. 范召卿，谭德强，崔润，黄彦维，邓凤伦，杨建炜. 基于质量流量控制保护气均匀混配的MAG焊改善研究. 成组技术与生产现代化. 2023(03): 38-43 .
    2. 张永明，黄松涛，周灿丰. 高气压环境下脉冲MAG焊气体混合比对焊缝成形的影响. 电焊机. 2015(11): 147-150 .

    Other cited types(4)

Catalog

    Get Citation
    PDF
    XML
    Article views (3617) PDF downloads (892) Cited by(6)
    Turn off MathJax
    Article Contents
    Abstract
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return