Advanced Search
FENG Xiaosong, CHEN Shuhai, LI Liqun, CHEN Yanbin. Temperature distribution of Al/Ti dissimilar alloys joint in laser welding-brazing[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (10): 9-12,16.
Citation: FENG Xiaosong, CHEN Shuhai, LI Liqun, CHEN Yanbin. Temperature distribution of Al/Ti dissimilar alloys joint in laser welding-brazing[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (10): 9-12,16.

Temperature distribution of Al/Ti dissimilar alloys joint in laser welding-brazing

More Information
  • Received Date: March 25, 2009
  • Laser welding-brazing experiments of 5A06 and TC4 were carried out and AlSi12 was used as filler metal.The heat transfer in the process was analyzed and the three heat source models were established.With the heating of laser vertical beam, declining beam, off-center beam and rectangular beam, the joint temperature field of Al/Ti dissimilar alloys was calculated and analyzed by finite element method.The simulated results indicate that the temperature distribution is dissymmetrical obviously on the two sides of the seam.It can avoid the local overheating at the interface of titanium alloy that the laser spot center deviation from the seam centerline to aluminum base metal side is 0.40.6 mm.With elliptical spot heating, the temperature history of the joint is similar with the situation of circle spot heating, and with rectangular spot heating, the temperature difference between the joint!interface upper part and bottom is reduced.
  • Related Articles

    [1]LI Chaojun, YAN Yanfu, REN Xiaofei, WANG Yaming, WANG Hongna. Effect of LaNd on the spreadability of Ti-13Zr-21Cu-9Ni brazing fillers and the properties of TC4 joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(12): 74-79. DOI: 10.12073/j.hjxb.20200527002
    [2]YAN Yanfu, LI Chaojun, REN Xiaofei, GU Tianliang. Effect of In element on spreadability and micro-interface of Zn15Al5Cu solder[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(4): 51-55. DOI: 10.12073/j.hjxb.20191113002
    [3]ZHANG Man, XIA Zhiqiong, ZHANG Lincai, XU Hongbin. Spreadability of Zn-Al filler metal and fracture mechanism of 6063 Al-alloy brazed joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(8): 63-66.
    [4]SHENG Yangyang, YAN Yanfu, TANG Kun, ZHAO Kuaile. Effect of content of Sn on spreading properties and tensile properties of Bi5Sb solder alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (6): 85-88.
    [5]LU Fangyan, XUE Songbai, LAI Zhongmin, ZHANG liang, GU Liyong, GU Wenhua. Effect of gallium on microstructure and properties of Ag-Cu-Zn filler metal[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (1): 55-59.
    [6]LU Fangyan, XUE Songbai, ZHANG liang, LAI Zhongmin, GU Iiyong, GU Wenhua. Effects of trace indium on properties and microstructure of Ag-Cu-Zn filler metal[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (12): 85-88.
    [7]CHEN Wenxue, XUE Songbai, WANG Hui, HAN Zongjie. Effects of Ga on properties of Sn-9Zn lead-free solder[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (4): 37-40.
    [8]SHI Yiping, XUE Songbai, WANG Jianxin, GU Liyong, GU Wenhua. Effects of Ce on spreadability of Sn-Cu-Ni lead-free solder and mechanical properties of soldered joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (11): 73-77.
    [9]WANG Jian-xin, XUE Song-bai, HAN Zong-jie, WANG ning, YU Sheng-lin. Effects of temperature and coatings on wettability of Sn-Cu-Ni lead-free solder[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (10): 53-56.
    [10]WANG Xu-yan, XUE Song-bai, YU Sheng-lin, ZHU Xiao-jun. Effects of temperature and coatings on wettability of Sn-Ag-Cu lead-free solder[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (10): 93-96.
  • Cited by

    Periodical cited type(8)

    1. 余海松,余闪闪,李婷,尹彦平,吕晓刚. 18Ni不锈钢电阻点焊接头力学性能有限元仿真. 焊接. 2023(05): 24-28 .
    2. 陈素明,杨平,贺韡,张锰,王文博,张兵宪. 消除应力回火对30CrMnSiNi2A真空电子束焊接头组织和力学性能的影响. 焊接. 2022(03): 47-51+57 .
    3. 余海松,余闪闪,王攀锋,叶丹力,李婷. 18Ni钢圆筒对接环焊缝TIG焊收缩变形力学性能及仿真研究. 航空精密制造技术. 2022(03): 19-22 .
    4. 曹子傲,戴青鹏,沈慧,斯庭智. 溴化银乳剂的合成及其在氢微印中的应用. 安徽工业大学学报(自然科学版). 2021(04): 367-372+406 .
    5. 孟凡明. 船体结构钢焊接冷裂纹研究进展. 材料开发与应用. 2019(06): 57-63 .
    6. 薛钢,王涛,杨超飞,牛佳佳,牛继承. 基于I_1断裂准则的铁素体型钢焊接氢致开裂机制研究. 材料开发与应用. 2018(04): 49-52 .
    7. 杨超飞,薛钢,代雪佳,王涛,牛继承. 氢在低合金高强钢中的扩散系数研究. 材料开发与应用. 2018(04): 109-113 .
    8. 薛钢,王涛,杨超飞,牛佳佳,成应晋. 铁素体型钢焊接中氢的存在状态分析. 材料开发与应用. 2018(05): 48-53 .

    Other cited types(2)

Catalog

    Article views (214) PDF downloads (127) Cited by(10)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return