Advanced Search
ZHANG Guodong, XUE Jilin, ZHOU Chang Yu. Optimization on welding procedure of high temperature pipeline based on orthogonal test design[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (11): 53-56.
Citation: ZHANG Guodong, XUE Jilin, ZHOU Chang Yu. Optimization on welding procedure of high temperature pipeline based on orthogonal test design[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (11): 53-56.

Optimization on welding procedure of high temperature pipeline based on orthogonal test design

More Information
  • Received Date: December 09, 2007
  • The welded joint of heat-resistant steel P91 is used widely at high temperature in power palnt.The distribution of welding residual stress of thick wall pipeline is more complicated, and the welding residual stress has great effect on the creep at high temperature environment.The welding parameters of P91 were optimized by the method of orthogonal experiment design, which uses welding residual stress as the index of evaluation and then the welding residual stress under the optimum welding procedure was simulated by the finite element analysis codes ABAQUS.The distribution of welding residual stress for P91 thick wall pipeline was obtained.The research results show that the effect of welding speed on welding residual stress is the most remarkable.Then the effect of arc voltage, welding current and groove gap on welding residual stress is reduced sequen-tially.The research results can provide the possibility on optimizing welding procedure of high temperature pipe and controlling welding residual stress effectively.
  • Related Articles

    [1]FENG Zhiqiang, ZENG Xianping, FANG Naiwen, ZHAO Daidi, LI Quan, LUO Jiutian, LI Xin. Multi-information fusion welding defect identification combining neighborhood rough set and optimized SVM[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION. DOI: 10.12073/j.hjxb.20240712001
    [2]GAO Xiangdong, LIU Yingying, XIAO Zhenlin, CHEN Xiaohui. Analysis of high-power disk laser welding status based on multi-sensor information fusion[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(12): 31-34,88.
    [3]GAO Yanfeng, XIAO Jianhua. Curved weld-seam tracking based on information fusion of welding gun inclinations[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(12): 15-18.
    [4]ZOU Yirong, DU Dong, ZENG Jinle, ZHANG Wenzeng. Visual method for weld seam recognition based on multi-feature extraction and information fusion[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (5): 33-36.
    [5]GUO Haibin, LI Guizhong. A double-characteristic fusion-control algorithm for resistance spot welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (4): 105-108.
    [6]XUE Haitao, LI Yongyan, CUI Chunxiang, DONG Tianshun. Extraction of diagnostic information of expulsion defect in resistance spot welding process by wavelet analysis method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (5): 38-40.
    [7]YANG Qian, WANG Guangwei, HUA Xueming, WU Yixiong. Edge detection of metal transfer image based on wavelet transform[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (4): 38-40.
    [8]CAI Guorui, DU Dong, TIAN Yuan, HOU Runshi, GAO Zhiling. Defect detection of X-ray images of weld using optimized heuristic search based on image information fusion[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (2): 29-32.
    [9]PAN Cun-hai, LI Huan, LI Jun-yue, YANG Yun-qing, XUE Hai-tao. Multi-information fusion of droplet transfer in pulsed GMAW[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2003, (4): 1-4.
    [10]CHANG Yun-long, XUE Jia-xiang, HUANG Shi-sheng. Multi-sensor Information Fusion and Control of Robot Spot Welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2000, (2): 85-89.

Catalog

    Article views (261) PDF downloads (59) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return