Advanced Search
YAN Zhiguo, XU De, LI Yuan. A method for extracting edge features of welding seambased on an adaptive binary threshold[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (7): 34-38.
Citation: YAN Zhiguo, XU De, LI Yuan. A method for extracting edge features of welding seambased on an adaptive binary threshold[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (7): 34-38.

A method for extracting edge features of welding seambased on an adaptive binary threshold

More Information
  • Received Date: September 10, 2007
  • This paper presents an image processing method which can extract the edge of welding seam reliably.Histogram equalization is performed on the gradient image of the original welding image to compress the gray distribution of pixels which represent the edge information of the image.Then the global binary threshold is determined.A small window is sliding on the histogram equalized gradient image with a step equal to half-width of thewindow to determine the local binary threshold in the window area.The adaptive binary threshold in the window area is obtained by combining the global and the local binary threshold.The image is binarized according to the adaptive binary threshold.Moreover, an iterative method is designed to remove noises in the binary image.The testing results of practical images demonstrate the validity of the method.
  • Related Articles

    [1]XU Zhiwu, LI Zhengwei, FENG Yan, YAN Jiuchun. Microstructure and mechanical properties of Mg/Al friction stir lap welding joint assisted by stationary shoulder[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2017, 38(4): 1-6. DOI: 10.12073/j.hjxb.20170401
    [2]MAO Yuqing, KE Liming, HUANG Bin, LIU Fencheng. Effect of shoulder profile on plastic flow of weld metal in aluminum alloys friction stir welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2017, 38(3): 27-32.
    [3]MAO Yuqing, KE Liming, LIU Fencheng, LIU Qiang. Effect of pin eccentricity on flow behavior of plastic material in friction stir welds[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2017, 38(2): 51-56.
    [4]WANG Weibing, LUAN Guohong, ZHANG Kun, ZHAO Huaxia. Fundamental model of plastic material flow in FSW[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(12): 71-74.
    [5]WANG Xijing, XU Youwei, ZHANG Liangliang, WEI Wankui. Plastic metal flow characteristic and fracture behaviors of DP600/AZ31 with non-keyhole friction stir spot welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(12): 57-60,70.
    [6]JI Shude, MENG Qingguo, SHI Qingyu, ZHANG Liguo, ZOU Aili. Numerical simulation of metal plastic flow in friction stir welding affected by pin shape[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (2): 93-96.
    [7]YU Yong-zheng, LUO Yu, LUAN Guo-hong, SUN Cheng-bin. Metal flow behavier in friction stir welding of LF6 aluminum alloy and LD10 aluminum alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2004, (6): 115-118.
    [8]YU Yong-zheng, LUO Yu, LUAN Guo-hong. Factors affecting on metal plastic flow during friction stir welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2004, (5): 117-120.
    [9]ZHANG Hua, LIN San bao, WU Lin, FENG Ji cai, LUAN Guo hong. Current progress and prospect of friction stir welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2003, (3): 91-96.
    [10]Du Suigeng, Liu Xiaowen, Wu Shichun, Li Xiaoxia. Plastic Flow Equation of Weld Metal during Quasi-steady Friction Stage[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1999, (4): 219-224.

Catalog

    Article views (239) PDF downloads (75) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return