Advanced Search
ZHANG Lihong, CHEN Furong. Welding of low-temperature steel 07MnNiCrMoVDR and its low-temperature impact toughness[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (6): 68-72.
Citation: ZHANG Lihong, CHEN Furong. Welding of low-temperature steel 07MnNiCrMoVDR and its low-temperature impact toughness[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (6): 68-72.

Welding of low-temperature steel 07MnNiCrMoVDR and its low-temperature impact toughness

More Information
  • Received Date: September 17, 2007
  • Welding and postweld heat-treatment were carried out for low-temperature steel 07MnNiCrMoVDR.Low-temperature impact toughness was tested, the fiber percentage of fracture at different temperature was calculated, macroscopic and microscopic fracture and microstructure were analyzed for base metal, weld seam and heat-affected zone.The results indicate that impact energy of every zone meets requirement of 07MnNiCrMoVDR steel's mechanical property.It also shows that the chosen welding technology and postweld heat-treatment technology are reasonable.Fiber percentage in base metal fracture is higher than that in heat-affected zone fracture and it is the lowest in welded seam fracture through calculation of fracture's fiber percentage.It indicates low-temperature impact toughness of base metal is the highest, and its is higher in heat-affected zone than that in welded seam.
  • Related Articles

    [1]MA Yiming, GUO Xiao, HAN Ying, JIANG Yinglong, LIU Zicheng, GAN Hongfeng, SONG Changhong. Influence mechanism of heat input on the low-temperature impact toughness of the coarse grain heat affected zone of ultra-strength steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2024, 45(12): 90-98. DOI: 10.12073/j.hjxb.20240709003
    [2]ZENG Daoping, ZHENG Shaoxian, AN Tongbang, DAI Haiyang, MA Chengyong. Study on microstructure and low-temperature impact toughness of deposited metal form covered electrodes for 440 MPa grade high-strength steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2024, 45(3): 120-128. DOI: 10.12073/j.hjxb.20230318002
    [3]LI Liying, WANG Xiaolei, LIU Zhenhong, ZHOU Cong, HAN Bin. Microstructure and low temperature toughness of HAZ of domestic 06Ni9DR Steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(7): 91-96. DOI: 10.12073/j.hjxb.20200202002
    [4]LIU Zhengjun, QIN Hua, SU Yunhai, LIU Changjun, LU Yanpeng. Microstructure and low temperature impact toughness of vibration assisted welded BWELDY960Q steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(8): 93-96.
    [5]YAN Keng, YE Fengyu, LIU Wei. Effect of heat inputs on low temperature toughness of F550Z steel welding joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(3): 93-96.
    [6]HU Jie, JIANG Zhizhong, HUANG Jihua, CHEN Shuhai, ZHAO Xingke, ZHANG Hua. Effects of heat treatment processes on microstructure and impact toughness of weld metal of vacuum electron beam welding on CLAM steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (11): 67-71.
    [7]SONG Shaopeng, LI Zhuoxin, LI Guodong, SHI Chuanwei. Analysis on low temperature toughness of self-shielded flux cored wire used for pipeline[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (6): 68-72.
    [8]Menggenbagen, MA Chengyong, PENG Yun, TIAN Zhiling, LIN Wenguang. Effect of heat input on microstructure and low temperature impact resistance of welded joint of 9Ni steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (6): 69-72.
    [9]GUO Chunhuan, CHI Zhidong, FU Xueman, LIU Ruitang. Difference of impact absorbed energy between butt weld metal and deposited metal[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (6): 99-102.
    [10]WANG Guoping, CHEN Xuedong, WANG Bing. Low temperature toughness of ultra low-carbon 9Ni steel welded joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (3): 37-40.

Catalog

    Article views (265) PDF downloads (61) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return