Advanced Search
MIAO Yugang, CHEN Yanbin, LI Liqun, WU Lin. Analysis of characteristic of vertical position laser welding for aluminum alloys[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (10): 57-60.
Citation: MIAO Yugang, CHEN Yanbin, LI Liqun, WU Lin. Analysis of characteristic of vertical position laser welding for aluminum alloys[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (10): 57-60.
shu

Analysis of characteristic of vertical position laser welding for aluminum alloys

  • State Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin 150001, China

More Information
  • Received Date: November 24, 2006
    Graphical Abstract
    • Abstract
  • The experiments of vertical and flat position laser welding for 4 mm-thick 5A06 aluminum alloys were implemented, and the characteristics of weld dimension and porosity in the vertical position laserwelding for aluminum alloys were investigated.The results show that the concave value and excessive penetration value of vertical welding is less than those of flat welding.Further, with the increase of heat input, the difference of vertical and flat welding becomes obvious.The weld appearance and dimension of the vertical welding and flat welding were slightly different.When the heat input is increased to a great extent, the weld depth of vertical welding is more than that of flat welding.However, the weld width of vertical welding is less than that of flat welding.The porosity of vertical position laser welding for aluminum alloys is composed of the large and irregular porosity or hole.It is not obviously different during vertical welding and flat welding, and a great deal porosity concentrates in the upper and middle part of weld section, which can be indicatied from the distributing position and shape of porosity.The number of porosity in vertical welding was slightly less than that of flat welding for the same welding parametors.
    • FullText(HTML)
    • References (0)
    • Related Articles

  • Related Articles

    [1]XU Kai, WU Pengbo, LIANG Xiaomei, CHEN Jian, HUANG Ruisheng. Analysis of characteristics of aluminum alloy laser multi stranded welding wire MIG hybrid welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2021, 42(1): 16-23. DOI: 10.12073/j.hjxb.20201120003
    [2]HUANG Ruisheng, ZOU Jipeng, MENG Shenghao, YANG Yicheng, ZHANG Meiwei. Process characteristics of laser scanning welding of aluminum alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(4): 61-66. DOI: 10.12073/j.hjxb.2019400101
    [3]ZHU Zongtao, WANG Xuefei, YANG Xiaoyi, GAO Jian. Droplet transfer in aluminum alloy laser-MIG hybrid welding coupled by high frequency pulses and its cladding characteristics[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(8): 39-44.
    [4]PENG Jin, LI Liqun, LIN Shangyang, DENG Zhou. Welding characteristics of aluminum alloy with pre-melting liquid filler[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(10): 45-48.
    [5]MIAO Yugang, LI Liqun, CHEN Yanbin, WU Lin. Joint characteristics of laser-arc double sides welding for aluminum alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (12): 85-88.
    [6]YAO Wei, GONG Shuili, STEVE Shi. Twin spot laser welding characteristics of aluminum alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (4): 108-112.
    [7]ZHOU Qi, LIU Fang-jun, GUAN Qiao. Study of the BCTW's phenomenon and characteristics in EBW[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (11): 8-12.
    [8]HANG Zheng-xiang, YIN Shu-yan, SONG Zheng. Aluminum alloy sheet welding technological characteristic of AC PMIG welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2004, (2): 99-102,106.
    [9]Wang Xinzhi, Chen Wuzhu, Cheng Shihong. A New Method for Optimizing Welding Inverter Using Assisting Circuit[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1998, (1): 56-61.
    [10]Chen Xueding, Akira Ohmori, Yoshiaki Arata. STUDY OF PHOTOCURRENT-POTENTIAL PROPERTY OF LOW PRESSURE CONDITION PLASMA SPRAYED TiO2 COATING ELECTRODE[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1990, (3): 129-135.

  • Cited by

    Periodical cited type(2)

    1. 栗振鑫，蔡创，余杰，陈梓琳，熊发帅，汤坪，陈辉. 激光摆动对TC4钛合金窄间隙焊接接头组织性能的影响. 中国激光. 2025(08): 77-86 .
    2. 郭克星. 铝合金激光焊接技术研究进展. 热处理. 2024(06): 1-7 .

    Other cited types(2)

Catalog

    Get Citation
    PDF
    XML
    Article views (173) PDF downloads (58) Cited by(4)
    Turn off MathJax
    Article Contents
    Abstract
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return