Advanced Search
XU Wen-li, LIU Xue-song, FANG Hong-yuan, TIAN Xi-tang, GUO Shao-qing. Parameters optimization for welding aluminum alloy 2024 sheet with high strength[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2004, (2): 39-42.
Citation: XU Wen-li, LIU Xue-song, FANG Hong-yuan, TIAN Xi-tang, GUO Shao-qing. Parameters optimization for welding aluminum alloy 2024 sheet with high strength[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2004, (2): 39-42.

Parameters optimization for welding aluminum alloy 2024 sheet with high strength

More Information
  • Received Date: August 26, 2003
  • In the study, a new technical is presented from the viewpoint of mechanics to weld aluminum alloy 2024 sheet with low stress, little distortion and no hot crack which the evolution of stress and strain in the weld and its adjacent zones can be controlled by adjusting the welding temperature field. The effectiveness of reducing residual distortion by thermal tensioning and trailing intense cooling is verified by experiments. In these experiments,orthonormality test design is used to guide the experiments aim to find the key factors. Furthermore, the key technological factors and experimental conditions, which influence the welding distortion of aluminum alloy sheet, are achieved by means of linear regression.The trustful regression equation and optimal technological standard are got. In addition, a series of parametric studies are conducted to demonstrate the influence of several key parameters on the effectiveness of the distortion control.
  • Related Articles

    [1]HUANG Gang, ZHANG Qingdong, WANG Chunhai, ZHANG Boyang, KONG Ning. Experimental research on the blind hole-drilling method for measuring residual stress of steel plate[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(9): 49-59, 80. DOI: 10.12073/j.hjxb.20200403002
    [2]GAN Shiming, HAN Yongquan, CHEN Furong. Analysis on error factors of welding residual stress measured by hole drilling method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(10): 48-53. DOI: 10.12073/j.hjxb.2018390247
    [3]HUANG Chaoqun1, LI Huan1, LUO Chuanguang1,2, SONG Yonglun3. Comparative study of blind hole method and indentation method in measuring residual stress of 2219 aluminum alloy arc-welded joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2017, 38(7): 54-58. DOI: 10.12073/j.hjxb.20150710004
    [4]LI Hao, LI Hua. Release coefficients during measuring non-uniform residual stress with blind-hole method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (6): 85-88.
    [5]MA Wenbo, CHEN Shuguang, LIU Huiqiong, LIN Wen, SHEN Yulong, LIU Jipu. FEM simulation of calibration on strain release coefficients in blind hole method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (2): 97-100.
    [6]LI Hao, LIU Yihua. Residual stress field in hole-drilling method-part II:application[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (10): 33-36.
    [7]LI Hao, LIU Yihua. Residual stress field in hole-drilling method-part I:Theoretical analysis[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (9): 46-50.
    [8]YA Min, DAI Fu-long, LU Jian. Study on Residual Stress of Friction Stir Welding by Moiré Interferometry and Hole-Drilling Method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2002, (5): 53-56.
    [9]Chen Huaining, Chen Liangshan, Dong Xiuzhong. Drilling strains in measuring residual stress with hole-drilling strain-gage method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1994, (4): 276-280.
    [10]Meng Gongge. Reliability and precision of blind hole drilling method for determining high residual stresses[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1991, (4): 235-238.
  • Cited by

    Periodical cited type(4)

    1. Zhihai Dong,Ye Tian,Long Zhang,Tong Jiang,Dafeng Wang,Yunlong Chang,Donggao Chen. Research status of high efficiency deep penetration welding of medium-thick plate titanium alloy: A review. Defence Technology. 2025(03): 178-202 .
    2. 贾亚洲,姚子鹏,肖珺,陈树君,黄文浩,王怀明. 双侧激光脉冲非对称布置驱动GMAW可编程熔滴过渡分析. 焊接学报. 2025(03): 59-64 . 本站查看
    3. 刘秀航,高向东,孙友松,肖小亭,卢新钊. 激光-电弧复合焊接技术研究现状. 热加工工艺. 2022(07): 7-11 .
    4. 张书生,钟立明. 10 mm厚Q355B激光-电弧复合焊接接头组织及性能. 机械制造文摘(焊接分册). 2022(02): 7-10 .

    Other cited types(6)

Catalog

    Article views (207) PDF downloads (72) Cited by(10)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return