Advanced Search
ZHANG Gang, LI Jian-jun, DING Chun-hui. Cyclic Stress-strain Behaviors for Butt Joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2001, (2): 93-96.
Citation: ZHANG Gang, LI Jian-jun, DING Chun-hui. Cyclic Stress-strain Behaviors for Butt Joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2001, (2): 93-96.

Cyclic Stress-strain Behaviors for Butt Joint

More Information
  • Received Date: June 18, 2000
  • Low cycle fatigue tests had been carried out to investigate the cyclic behaviors of welded butt joint of structural steel. Cyclic stressstrain curves of weld metal, base metal and welded joint were obtained respectively by means of incremental step method in various strain levers with single sample method. The different cyclic stress-strain behaviors of three kinds of specimen were compared and analyzed. For butt joint specimen, the weld metal, heat affection zone and base metal, are loaded cyclically. It is proposed that the heterogeneity of mechanical property resulted from the heterogeneous microstructure of welded joint causes the different cyclic stress-strain properties from the other two kinds of specimen. The heterogeneity affecting fatigue behaviors of welded joint should be conceded during the design of boiler and pressure vessel structures.
  • Related Articles

    [1]ZHU Zhiming, YANG Zhongyu, XIA Zhuliang, TANG Yingying. Dynamic stability analysis of soft-switching resonant process and optimization of PWM control waveform[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(8): 5-8.
    [2]CHEN Maoai, JIANG Yuanning, WU Chuansong. Optimization of welding current waveform parameters in controlled short circuiting transfer GMAW[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(7): 79-82.
    [3]XU Wenhao, YANG Lijun, BI Chao, ZHANG Guangkai. Approximate entropy analysis of CO2 short circuit welding under waveform control[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (7): 81-84.
    [4]FENG Yuehai, LIU jia, YIN Shuyan, WANG Kehong. The new type of low spatter and high energy waveform control technology for short-circuiting welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (8): 45-48.
    [5]XUE Jiaxiang, YAO Ping, DONG Fei, WEN Yuanmei, WANG Zhenmin. Forward median waveform control process parameter in pulsed MIG welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (1): 73-76,80.
    [6]CHEN Huan-ming, ZENG Min, CAO Biao. Current waveform control system of high-speed CO2 arc welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (1): 41-45.
    [7]WU Kai-yuan, HUANG Shi-sheng, MENG Yong-min, LI Yang. Control strategy of waveform with median phase in droplet transfer for pulsed MIG welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2004, (4): 51-54,58.
    [8]YANG Li-jun, LI Jun-yue, LI Huan, LI Zhi-yong. Arc behavior of CO2 short circuit welding under waveform control[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2003, (5): 73-76.
    [9]LI Huan, HU Lian-hai, LI Jun-yue, YANG Li-jun. Computer Simulation and Experimental Research on CO2 Short-cir.cuit Transfer Welding Under Waveform Control[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2002, (2): 1-4.
    [10]YU Jian-rong, JIANG Li-pei, SHI Yao-wu. Self-optimizing Intelligent Control of Current Waveform Parameters of CO2 Gas Shielded Arc Welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2001, (4): 26-30.

Catalog

    Article views (339) PDF downloads (189) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return