Advanced Search
BAI Zhi-fan, WANG Wei-ming, JIANG Zhi-hong, ZHANG Yi. LCL-type Resonant Arc Welding Power Supply and Its Steaty-state Mathematical Model[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2000, (4): 80-83.
Citation: BAI Zhi-fan, WANG Wei-ming, JIANG Zhi-hong, ZHANG Yi. LCL-type Resonant Arc Welding Power Supply and Its Steaty-state Mathematical Model[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2000, (4): 80-83.

LCL-type Resonant Arc Welding Power Supply and Its Steaty-state Mathematical Model

More Information
  • Received Date: May 30, 2000
  • From domestic research on soft-switch converse power source, it is always used in communication and aviation power supply, Although the application of the soft switch technology in the communication and aviation power supply is almost successful, its application in the welding power supply is just beginning because of the specialties of the electronic arc load. Therefore, the LCL type resonant structure is to be studied in this paper. Now,all welding power source almost adopt series-resonance structure,it has narrow soft-switch range and big duty cycle loss. On the base of the above actuality, this paper presents the principle of LCL structure and it's typical waveforms, meantime, presents the operation of LCL-type resonant arc welding power supply with fixed frequency and it's steady-state mathematical model. Using MathCAD to get the results and compared it to the results of the SPICE simulative experiment, we verify this mathematical model is correct.
  • Related Articles

    [1]YANG Jianguo, LEI Jing, HE Yanming, ZHANG Tong, GAO Zengliang. Quiet element method of C276 alloy plate multi-pass welding based on finite element method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(12): 27-30,84.
    [2]DUAN Xiaoxue, ZHANG Yanhua, XIONG Linyu, TIAN Zhijie, SU Zhiqiang. Effect of crack location on limit loads of strength mismatched welded joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (6): 93-96.
    [3]WU Ying, ZHANG Peng, XIE Yanping. Stress analysis of plain dent on pipeline based on finite element method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (1): 57-60.
    [4]MENG Qingduan, Lü Yanqiu, LU Zhengxiong, SUN Weiguo. Finite element analysis on reliability of indium soldered joint in infrared focal plane array detector[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (5): 53-56.
    [5]MA Wenbo, CHEN Shuguang, LIU Huiqiong, LIN Wen, SHEN Yulong, LIU Jipu. FEM simulation of calibration on strain release coefficients in blind hole method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (2): 97-100.
    [6]GAO lili, XUE Songbai, ZHANG Liang, SHENG Zhong. Finite element analysis on the soldered joint reliability of FCBGA device[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (8): 73-76.
    [7]QIU Chang-jun, ZHOU Wei, HE Bin, FAN Xiang-fang. Study and finite element method analysis for bond strength of high-strength coating[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (4): 105-107.
    [8]LUO Ai-hui, CHEN Guan-long, LAI Xin-ming, ZHU Wen-feng. Distortion research on projection welding of car door hinge-Part I:processes simulation of projection welding based on coupled finite element method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (4): 37-40.
    [9]DONG Jun-hui, LIN Yan, LIN Wen-guang, YAO Qing-hu. Finite element analysis on welding residual stresses of thick wall pipe of heat resistant steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (2): 25-27,36.
    [10]LI Hong-ke, ZHANG Yan-hua. Finite element simulation of limit pressure pipe line with cracks using critical crack-tip-opening-angle[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (1): 53-57.
  • Cited by

    Periodical cited type(5)

    1. 高佳篷,洪波,贾爱亭,李湘文,屈原缘. 集装箱大梁熔化极气体保护电弧焊的焊缝跟踪系统. 中国机械工程. 2023(02): 238-244+251 .
    2. 朱庆芹,刘昕伟,孙浩. 激光三角位移传感器误差补偿的建模研究. 激光杂志. 2023(03): 242-246 .
    3. 臧日高,张春堂,樊春玲. 基于激光传感器的钻柱输送自动纠偏算法. 电子测量技术. 2023(05): 30-37 .
    4. 邱益,张康宁,梁杰. 基于线激光位移传感器的孔毛刺高度测量系统. 仪表技术与传感器. 2022(06): 105-108 .
    5. 刚建华,鲁明珠. 激光传感器的机器人自动定位检测研究. 激光杂志. 2021(07): 55-59 .

    Other cited types(4)

Catalog

    Article views (320) PDF downloads (90) Cited by(9)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return