Advanced Search
Zeng Hong, Ding Peifan. A STUDY OF THE MEASURER FOR THE POWER DENSITY DISTRIBUTION OF ELECTRON BEAM UNDER MICRO-COMPUTER CONTROL[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1988, (4): 223-231.
Citation: Zeng Hong, Ding Peifan. A STUDY OF THE MEASURER FOR THE POWER DENSITY DISTRIBUTION OF ELECTRON BEAM UNDER MICRO-COMPUTER CONTROL[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1988, (4): 223-231.

A STUDY OF THE MEASURER FOR THE POWER DENSITY DISTRIBUTION OF ELECTRON BEAM UNDER MICRO-COMPUTER CONTROL

More Information
  • Received Date: December 06, 1987
  • This paper describes a micro-computer controlled method of measuring the power density distribution of EB by scanning the beam over a pinhole. This is a direct measurement for an EB. A DMA with 2 channels was used for the data-accessing of the measurer. With this technique, the data-accessing rate can run up to 400 kHz, when a micro-computer with 2 MHz clock and two A/D converters with 5 μs converting rate were used. After data-processing, the direct and easily analyzed power distribution figures of profile and "isohypse" can be obtained.The authors provide thus an accurate and effective method of assessing the EB gun, investigating the difference between the theoretical computation and the objective reality of the electron optical system and researching the process technology of EB.
  • Related Articles

    [1]ZHANG Jiwei, LI Hongjia, FENG Zhongzhi, FANG Hongyuan. Prediction of welding distortion of large scale welded platform structure[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(3): 118-122. DOI: 10.12073/j.hjxb.2019400083
    [2]WANG Ping, LIU Yong, LI Dayong, FANG Hongyuan. Effect of solid-state phase transformation on welding residual stress of 10Ni5CrMoV steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2017, 38(5): 125-128. DOI: 10.12073/j.hjxb.20170528
    [3]GUO Nan, LIANG Jin, GONG Chunyuan, WANG Xiao guang. Real-time measurement of distortion in weld bead zone[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(8): 1-4.
    [4]LIU Yusheng, LI Ping, TIAN Jian, XUE Kemin, SONG Jian. Controlling welding distortion of joint lever based on elasticity anti-distortion method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(12): 17-21.
    [5]BI Tao, DENG Dean, LIU Xiaozhan, TONG Yangang. Investgation of influence of solid-state phase transformation on welding residual stress in P91steel joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(9): 55-59.
    [6]LIU Xiaozhan, DENG Dean, BI Tao, TONG Yangang. Effect of solid-state phase transformation on welding residual stress in laser butt-welded P91 steel plates[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(5): 41-43,64.
    [7]YANG Guangchen, ZHANG Yanhua. Effect of high-temperature phase transition of low carbon steel on weld angular distortion[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (8): 65-67.
    [8]LIU Chuan, ZHANG Jianxun. Numerical simulation of welding stresses and distortions based on 3D dynamic substructure method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (4): 21-24.
    [9]LI Hongke, SHI Qingyu, WANG Xin, LI Ting, LIU Yuan. Residual stress and distortion of Al alloy panels welded by FSW[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (2): 81-84.
    [10]XUE Zhong ming, QU Wen qing, CHAI Peng, ZHANG Yan hua. Review on prediction of welding distortion[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2003, (3): 87-90.

Catalog

    Article views (426) PDF downloads (47) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return