Advanced Search
Yang Xushan, Su Yupu, Lu Delin. STUDY OF THE TRANSFORMATION STRUCTURE IN THE WELD OVERHEATED ZONE OF 12Ni2CrMoV STEEL[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1988, (2): 82-83.
Citation: Yang Xushan, Su Yupu, Lu Delin. STUDY OF THE TRANSFORMATION STRUCTURE IN THE WELD OVERHEATED ZONE OF 12Ni2CrMoV STEEL[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1988, (2): 82-83.

STUDY OF THE TRANSFORMATION STRUCTURE IN THE WELD OVERHEATED ZONE OF 12Ni2CrMoV STEEL

More Information
  • Received Date: April 19, 1987
  • CCT Diagram of 12Ni2CrMoV steel has been formulated through the investigation of the simulatad weld thermal cycles. The transformation principles and structure characteristics in the overheated zone have been observed. The Y-groove tests have been adopted in studing the effect of preheat temperature on the susceptibility to cold cracking. The test results have shown the critical preheat temperatures are 60℃ and 100℃ when the contents of diffusible hydrogen in the weld metal are 1ml/100g and 2ml/100g respectively. The energy imput may not exceed 29.3~33.4×103J/cm in order to ensure a good notch toughness for the overheated zone. In consideration of the consistency of the data in both the CCT Digram and the Y-groove tests for 12Ni2CrMoV steel, the authors put forward the optimum welding technology for the fabrication of large welded structures.
  • Related Articles

    [1]ZHANG Lei, LIU Changqing, YU Jingwei, HU Xihai, GONG Feng, JIN Guangri. Numerical analysis of microstructure evolution of coarse grained zone in sidewall during narrow gap submerged arc welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(4): 103-106.
    [2]ZHENG Huaibei, YE Xiaoning, ZHANG Xuefeng, JIANG Laizhu, LIU Zhenyu, WANG Guodong. Microstructure transformation,grain growth and precipitated phase of 12%Cr ferritic stainless steel in coarse grain zone[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (6): 37-40.
    [3]PENG Jixiang, ZHANG Tianhong, DENG Wanping, ZHANG Junxu. Microstructure and properties of over-heated zone and finegrained zone of 10Ni8CrMoV steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (3): 105-108.
    [4]Wang Yucheng, Yu Jie, Li Yan, Li Weidong, Wang Jianguang. Martensitic Transformation and Microstructure in Fusion Zone of Dissimilar Steel Welded Joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1999, (3): 147-152.
    [5]Wu Zhantian, Guo Jiuzhu, Zhou Zhenhua, Zhu Hong, Wang Xiaoyu. Structure and property of coarse-grained zone in weld of a high strength low alloy 20Mn2WNbB steel studied by thermal simulation[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1995, (1): 40-44.
    [6]Sun Jingtao, Zhou Zhaowei, Lin Qing. Low-temperaturc toughness of overheated zone in weld of 15MnVNq-C steel used for Jiujiang Bridge[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1994, (4): 228-234.
    [7]Gao Huilin. Study of strength and toughness of over-heated HAZ in medium carbon Q and T steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1994, (2): 107-112.
    [8]Lu Delin, Li Yanwen, Li Xianjun, Chen Junyi, Zhang Ruibin, Zheng Kui. Effect of lath martensite on toughness in overheated zone of 10Ni5CrMoV and 12Ni2CrMoVA steels[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1992, (2): 114-120.
    [9]Zhang Guojiu, Zhou Zhaowei, Cai Hongbin. Microstructure and its effect on properties of weld overheated zone of T-1, StE690 and Wel-ten80c steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1992, (1): 13-20.
    [10]Liu Tingcai, Peng Rihui, Hu Minsuo, Chen Xiuying, Xie Enchen, Zhang Xiaoyan. STRUCTURE TRANSFORMATION FEATURES IN WELD HEAT-AFFECTED ZONE AND THEIR EFFECTS ON THE PROPERTIES OF Bi-PHASE STAINLESS STEEL 00Cr18Ni5Mo3Si2[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1985, (1): 15-22.
  • Cited by

    Periodical cited type(7)

    1. 崔莹,戴丽萍. 基于声发射信号特征的粮食库房钢结构建筑焊接裂纹识别研究. 粮食与饲料工业. 2025(02): 44-47 .
    2. 张诚,袁慧铮,应之歌. 应用多传感器激光视觉的焊接机器人变质心补偿控制. 激光杂志. 2024(01): 236-241 .
    3. 刘明宝,林庆伟. 基于超声波检测的钢板焊缝内部缺陷识别方法. 焊接技术. 2024(03): 128-132 .
    4. 刘婷玉,李哲阳. 基于激光扫描成像的机械零件加工缺陷识别方法. 激光杂志. 2024(04): 259-264 .
    5. 杨舒婷,杨青慧,张鼎,张元婧,俞靖彦,李涵,王峰,张怀武. 磁光成像技术及石榴石薄膜在无损检测中的应用. 磁性材料及器件. 2024(03): 90-101 .
    6. 杨怀栋,张昕,李勋,邓华森,周丰. 电动汽车充电站钢结构停车棚焊接节点裂纹识别. 焊接技术. 2023(10): 136-140 .
    7. 刘倩雯,张南峰,阮洁珊,叶广文,张艳喜,高向东. 电阻点焊质量检测技术研究现状. 精密成形工程. 2022(05): 83-93 .

    Other cited types(4)

Catalog

    Article views (346) PDF downloads (54) Cited by(11)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return