- Ei Compendex
- Scopus
- DOAJ
- Chinese Science Citation Database (CSCD)
- World Journals Clout Index Report
- T1 level in Directory for Mechanical EngineeringDisciplines
| Citation: |
GONG Shuhe, QIAN Mingfang, ZHANG Xuexi, SUN Liangbo. Laser powder bed fusion process and magnetic properties of Ni-Mn-Ga alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2025, 46(4): 52-60. DOI: 10.12073/j.hjxb.20240116005
|
Laser powder bed fusion (L-PBF) technology combined with optimized heat treatment strategies was used to explore a new manufacturing scheme to achieve the controllable fabrication of functional Ni-Mn-Ga alloys and complex components. The results show that defects including porosity, cracks, and lack-of-fusion are generated during laser processing, with cracks primarily originating from significant thermal stresses induced by rapid solidification. Within the optimized process interval, parts with a density of more than 97.5% are successfully prepared, and the materials showed L21-ordered austenite structure at the ambient temperature of 295~301 K. After homogenization, ordering, and stress-relief annealing treatments, the material demonstrates improved compositional homogeneity, narrowed phase transformation temperature interval, elevated phase transition characteristic temperatures by approximately 20 K, and significantly enhanced magnetization. At ambient temperature, the material exhibits a mixed phase comprising L21-ordered austenite and five-layered modulated (5M) martensite structures. Under a magnetic field with a magnetic induction intensity of 5 T, the heat-treated material achieves a saturation magnetization of 65.8 (A·m2)/kg at 300 K. L-PBF can fabricate functional Ni-Mn-Ga magnetic shape memory alloys.
| [1] |
ZHONG S J, QIAN M F, ZHANG J R, et al. Microstructure and magnetocaloric effect in nonequilibrium solidified Ni-Mn-Sn-Co alloy prepared by laser powder bed fusion[J]. Additive Manufacturing, 2024, 79: 103941. doi: 10.1016/j.addma.2023.103941
|
| [2] |
CHMIELUS M, ZHANG X X, WITHERSPOON C, et al. Giant magnetic-field-induced strains in polycrystalline Ni–Mn–Ga foams[J]. Nature Materials, 2009, 8(11): 863 − 866. doi: 10.1038/nmat2527
|
| [3] |
SUN W, LU X, WEI Z Y, et al. Multicaloric effect in Ni–Mn–Sn metamagnetic shape memory alloys by laser powder bed fusion[J]. Additive Manufacturing, 2022, 59: 103125. doi: 10.1016/j.addma.2022.103125
|
| [4] |
SONG X P, HUANG J K, FAN D. Review of functionally graded materials processed by additive manufacturing[J]. China Welding, 2023, 32(3): 41 − 50.
|
| [5] |
LAITINEN V, SOZINOV A, SAREN A, et al. Characterization of as-built and heat-treated Ni-Mn-Ga magnetic shape memory alloy manufactured via laser powder bed fusion[J]. Additive Manufacturing, 2021, 39: 101854. doi: 10.1016/j.addma.2021.101854
|
| [6] |
STEVENS E, KIMES K, SALAZAR D, et al. Mastering a 1.2K hysteresis for martensitic para-ferromagnetic partial transformation in Ni-Mn(Cu)-Ga magnetocaloric material via binder jet 3D printing[J]. Additive Manufacturing, 2021, 37: 101560. doi: 10.1016/j.addma.2020.101560
|
| [7] |
TALOR S L, SHAH R N, DUNAND D C. Microstructure and porosity evolution during sintering of Ni-Mn-Ga wires printed from inks containing elemental powders[J]. Intermetallics, 2019, 104: 113 − 123. doi: 10.1016/j.intermet.2018.10.024
|
| [8] |
李明川, 马瑞, 常帅, 等. LPBF制备镍基高温合金组织及显微硬度调控能力[J]. 焊接学报, 2024, 45(12): 20 − 27.
LI Mingchuan, MA Rui, CHANG Shuai, et al. Tailored ability of the microstructure and microhardness for nickel-based superalloy fabricated by LPBF[J]. Transactions of the China Welding Institution, 2024, 45(12): 20 − 27.
|
| [9] |
HECZKO O, STRAKA L. Compositional dependence of structure, magnetization and magnetic anisotropy in Ni–Mn–Ga magnetic shape memory alloys[J]. Journal of Magnetism and Magnetic Materials, 2004, 272: 2045 − 2046.
|
| [10] |
CHERNENKO V A. Compositional instability of β-phase in Ni-Mn-Ga alloys[J]. Scripta Materialia, 1999, 40(5): 523 − 527. doi: 10.1016/S1359-6462(98)00494-1
|
| [11] |
邢乐丽. 基于磁记忆检测的铁磁材料自发磁化微观机理研究[D]. 西安: 西安理工大学, 2022.
XING Leli. Research on the microscopic mechanism of spontaneous magnetization of ferromagnetic materials based on magnetic memory detection[D]. Xi'an: Xi'an University of Technology, 2022.
|
| [12] |
MILLERET A, LAITINEN V, ULLAKKO K, et al. Laser powder bed fusion of (14 M) Ni-Mn-Ga magnetic shape memory alloy lattices[J]. Additive Manufacturing, 2022, 60: 103231. doi: 10.1016/j.addma.2022.103231
|
| [13] |
ITUARTE I F, NILSEN F, NADIMPALLI V K, et al. Towards the additive manufacturing of Ni-Mn-Ga complex devices with magnetic field induced strain[J]. Additive Manufacturing, 2022, 49: 102485. doi: 10.1016/j.addma.2021.102485
|
| [14] |
ACIERNO A, MOSTAFAEI A, TOMAN J, et al. Characterizing changes in grain growth, mechanical properties, and transformation properties in differently sintered and annealed binder-jet 3D printed 14M Ni–Mn–Ga magnetic shape memory alloys[J]. Metals, 2022, 12(5): 724. doi: 10.3390/met12050724
|
| [15] |
TAYLOR S L, SHAH R H, DUNAND D C. Ni-Mn-Ga micro-trusses via sintering of 3D-printed inks containing elemental powders[J]. Acta Materialia, 2018, 143: 20 − 29. doi: 10.1016/j.actamat.2017.10.002
|
| [16] |
DUAN J F, HUANG P, ZHANG H, et al. Magnetic entropy changes of NiMnGa alloys both on the heating and cooling processes[J]. Journal of alloys and compounds, 2007, 441(1-2): 29 − 32. doi: 10.1016/j.jallcom.2006.09.105
|
| [17] |
HU F X, SHEN B G, SUN J R. Magnetic entropy change involving martensitic transition in NiMn-based Heusler alloys[J]. Chinese Physics B, 2013, 22(3): 037505. doi: 10.1088/1674-1056/22/3/037505
|
| 1. |
黄洲扬，孙立新. 创新型不锈钢管线焊接质量评估标准及应用. 现代制造技术与装备. 2024(04): 111-114 .
|
Supported by:
Beijing Renhe Information Technology Co. Ltd
DownLoad: