Research status and development trend of electron beam welding for advanced materials and dissimilar materials

Binggang ZHANG; Yifan WANG; Houqin WANG

doi:10.12073/j.hjxb.20220506001

TRANSACTIONS OF THE CHINA WELDING INSTITUTION > 2022 > 43(8): 95-101. > DOI: 10.12073/j.hjxb.20220506001

Binggang ZHANG, Yifan WANG, Houqin WANG. Research status and development trend of electron beam welding for advanced materials and dissimilar materials[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(8): 95-101. DOI: 10.12073/j.hjxb.20220506001

Citation:

PDF (1614 KB)

Research status and development trend of electron beam welding for advanced materials and dissimilar materials

State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin, 150001, China

More Information

Received Date: May 05, 2022
Available Online: July 31, 2022

Graphical Abstract

Abstract

Abstract

Electron beam welding is an advanced connection technology with rapid progress and vigorous development in recent years. With the increasingly mature technology, its competitiveness in the industrial field is increasing, and has been widely accepted by industrial sectors. In this paper, the research status of electron beam welding in the connection of advanced materials such as high temperature titanium alloys, superalloys, refractory metals and intermetallic compounds, and various dissimilar materials that are mutually soluble and difficult to dissolve are reviewed. The typical study results in welding defect control, welding process optimization, welding mechanism research obtained by researchers at home and abroad are briefly introduced, and the corresponding specific problems and welding process of electron beam welding for advanced materials and dissimilar materials are summarized. The special technical methods such as energy control and metallurgical regulation used in electron beam welding are generalized.
- electron beam welding,
- advanced materials,
- dissimilar materials,
- research status

FullText(HTML)

References (54)

References

冯吉才. 异种材料连接研究进展综述[J]. 航空学报, 2022, 43(2): 6 − 42.

Feng Jicai. Research progress on dissimilar materials joining[J]. Acta Aeronautica et Astronautica Sinica, 2022, 43(2): 6 − 42.

冯吉才, 王廷, 张秉刚, 等. 异种材料真空电子束焊接研究现状分析[J]. 焊接学报, 2009, 30(10): 108 − 112.

Feng Jicai, Wang Ting, Zhang Binggang, et al. Research status analysis of electron beam welding for joining of dissimilar materials[J]. Transactiongs of the China Welding Institution, 2009, 30(10): 108 − 112.

路志芳. 电子束焊接国内专利技术综述[J]. 现代制造技术与装备, 2019(5): 216 − 217. doi: 10.3969/j.issn.1673-5587.2019.05.110

Lu Zhifang. Overview of ratent technology of electron beam welding in China[J]. Modern Manufacturing Technology and Equipment, 2019(5): 216 − 217. doi: 10.3969/j.issn.1673-5587.2019.05.110

Cheng M, Yu B, Guo R, et al. Electron beam welding of a novel near α high temperature titanium alloy powder compact: effect of post-welding heat treatment on tensile properties[J]. Journal of Materials Research and Technology, 2021, 10: 153 − 163. doi: 10.1016/j.jmrt.2020.12.022

Fu P, Mao Z, Lin J, et al. Temperature field modeling and microstructure analysis of EBW with multi-beam for near α titanium alloy[J]. Vacuum, 2014, 102: 54 − 62. doi: 10.1016/j.vacuum.2013.11.002

Liu H, Song J, Cao X, et al. Enhancement of fatigue resistance by direct aging treatment in electron beam welded Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy joint[J]. Materials Science and Engineering:A, 2022, 829: 142168. doi: 10.1016/j.msea.2021.142168

Liu F, Chen Y, He C, et al. Very long life fatigue failure mechanism of electron beam welded joint for titanium alloy at elevated temperature[J]. International Journal of Fatigue, 2021, 152: 106446. doi: 10.1016/j.ijfatigue.2021.106446

Zhang S, Ma Y, Huang S, et al. Temperature-gradient induced microstructure evolution in heat-affected zone of electron beam welded Ti-6Al-4V titanium alloy[J]. Journal of Materials Science & Technology, 2019, 35(8): 1681 − 1690.

Zeng C, Zhang Y, Hu J, et al. The role of microstructure on corrosion fatigue behavior of thick-plate Ti-6Al-4V joint via vacuum electron beam welding[J]. Vacuum, 2020, 182: 109714. doi: 10.1016/j.vacuum.2020.109714

Lu Y, Turner R, Brooks J, et al. A study of process-induced grain structures during steady state and non-steady state electron-beam welding of a titanium alloy[J]. Journal of Materials Science & Technology, 2022, 113: 117 − 127.

刘武猛, 郭纯, 吴随松. 高温合金焊接研究现状及发展趋势[J]. 金属加工(热加工), 2022(1): 44 − 48.

Liu Wumeng, Guo Chun, Wu Suisong. Research status and development trend of superalloy welding[J]. Machinist Metal Forming, 2022(1): 44 − 48.

Han K, Wang H, Shen L, et al. Analysis of cracks in the electron beam welded joint of K465 nickel-base superalloy[J]. Vacuum, 2018, 157: 21 − 30. doi: 10.1016/j.vacuum.2018.08.011

Zhang Z, Wang S, Chen Y, et al. Microstructure and properties of 3D-GH3625 electron beam welded[J]. IOP Conference Series Materials Science and Engineering, 2018, 423(1): 12074.

Sun W, Wang S, Hong M, et al. Effect of heat input on microstructure and mechanical properties of IC10 Ni3Al-based superalloy electron beam welding joint[J]. Vacuum, 2020, 182: 109765. doi: 10.1016/j.vacuum.2020.109765

Taheri M, Kashani-Bozorg S F, Alizadeh A, et al. Analysis of liquation and solidification cracks in the electron beam welding of GTD-111 nickel-base superalloy joint[J]. Materials Research Express, 2021, 8(7): 76507. doi: 10.1088/2053-1591/ac1007

Cheng Y, Chen J, Shiue R, et al. The evolution of cast microstructures on the HAZ liquation cracking of Mar-M004 weld[J]. Metals (Basel ), 2018, 8(1): 35 − 48. doi: 10.3390/met8010035

Han K, Wang H, Peng F, et al. Investigation of microstructure and mechanical performance in IN738LC joint by vacuum electron beam welding[J]. Vacuum, 2019, 162: 214 − 227. doi: 10.1016/j.vacuum.2018.12.047

Chen J, Zhang P, Mo T, et al. Effect of TiC particles on ductility dip cracking susceptibility of Ni-base superalloy[J]. Science and Technology of Welding and Joining, 2021, 26(4): 294 − 300. doi: 10.1080/13621718.2021.1902609

Sonar T, Balasubramanian V, Malarvizhi S, et al. An overview on welding of Inconel 718 alloy—Effect of welding processes on microstructural evolution and mechanical properties of joints[J]. Materials Characterization, 2021, 174: 110997. doi: 10.1016/j.matchar.2021.110997

Han K, Wang H, Peng F, et al. Effect of thermal compensation treatment on the microstructure and mechanical properties of IN738LC joint by electron beam welding[J]. Journal of Manufacturing Processes, 2020, 58: 536 − 550. doi: 10.1016/j.jmapro.2020.08.024

Wen S, Liu Z, Mi D, et al. Revealing the fatigue crack propagation mechanism of a Ni-based superalloy electron beam welded joint through in-situ SEM observation[J]. International Journal of Fatigue, 2022, 162: 106955. doi: 10.1016/j.ijfatigue.2022.106955

Gupta R K, Anil Kumar V, Sukumaran A, et al. High-temperature tensile behaviors of base metal and electron beam-welded joints of Ni-20Cr-9Mo-4Nb superalloy[J]. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2018, 49(7): 2654 − 2672. doi: 10.1007/s11661-018-4652-x

Keshavarz M K, Turenne S, Bonakdar A. Solidification behavior of inconel 713LC gas turbine blades during electron beam welding[J]. Journal of Manufacturing Processes, 2018, 31: 232 − 239. doi: 10.1016/j.jmapro.2017.11.021

张永赟, 王廷, 李宁, 等. PM-TZM钼合金电子束焊接特性[J]. 焊接学报, 2018, 39(3): 57 − 60. doi: 10.12073/j.hjxb.2018390068

Zhang Yongyun, Wang Ting, Li Ning, et al. Weldability of PM-TZM alloy using electron beam welding[J]. Transactions of the China Welding Institution, 2018, 39(3): 57 − 60. doi: 10.12073/j.hjxb.2018390068

Chen G, Liu J, Shu X, et al. Study on microstructure and performance of molybdenum joint welded by electron beam[J]. Vacuum, 2018, 154: 1 − 5. doi: 10.1016/j.vacuum.2018.04.031

Wang T, Zhang Y, Jiang S, et al. Stress relief and purification mechanisms for grain boundaries of electron beam welded TZM alloy joint with zirconium addition[J]. Journal of Materials Processing Technology, 2018, 251: 168 − 174. doi: 10.1016/j.jmatprotec.2017.08.031

Zhang Y, Wang T, Jiang S, et al. Effect of rhenium content on microstructures and mechanical properties of electron beam welded TZM alloy joints[J]. Journal of Manufacturing Processes, 2018, 32: 337 − 343. doi: 10.1016/j.jmapro.2018.03.008

刘仁超. 氧化镧弥散强化钼合金电子束焊接接头组织及工艺研究[D]. 哈尔滨: 哈尔滨工业大学, 2020.

Liu Renchao. Study on microstructure and technology of lanthanum oxide dispersion strengthened molybdenum alloy electron beam welding[D]. Harbin: Harbin Institute of Technology, 2020.

Das K, Ghosh A, Bhattacharya A, et al. Effect of beam current on the microstructure, crystallographic texture and mechanical properties of electron beam welded high purity niobium[J]. Materials Characterization, 2021, 179: 111318. doi: 10.1016/j.matchar.2021.111318

罗昌森, 罗宏, 曾宪光, 等. 铜钨合金与低碳钢的焊接组织与性能[J]. 稀有金属材料与工程, 2015, 44(9): 2322 − 2325.

Luo Changsen, Luo Hong, Zeng Xianguang, et al. Microstructure and properties of welding joint of copper-tungsten alloy and low carbon steel[J]. Rare Metal Materials and Engineering, 2015, 44(9): 2322 − 2325.

Chen G, Zhang G, Yin Q, et al. Investigation of cracks during electron beam welding of γ-TiAl based alloy[J]. Journal of Materials Processing Technology, 2020, 283: 116727. doi: 10.1016/j.jmatprotec.2020.116727

Chen G, Zhang B, Liu W, et al. Crack formation and control upon the electron beam welding of TiAl-based alloys[J]. Intermetallics, 2011, 19(12): 1857 − 1863. doi: 10.1016/j.intermet.2011.07.017

何景山, 张秉刚, 吴庆生, 等. 焊后热处理对Ti₃Al电子束焊缝组织形态的影响[J]. 焊接学报, 2007, 28(5): 57 − 60. doi: 10.3321/j.issn:0253-360X.2007.05.015

He Jingshan, Zhang Binggang, Wu Qingsheng, et al. Effect of postweld heat treatment on microstructure of electron beam welded joints of Ti₃Al[J]. Transactions of the China Welding Institution, 2007, 28(5): 57 − 60. doi: 10.3321/j.issn:0253-360X.2007.05.015

Li Y, Wang H, Han K, et al. Microstructure of Ti-45Al-8.5Nb-0.2W-0.03Y electron beam welding joints[J]. Journal of Materials Processing Technology, 2017, 250: 401 − 409. doi: 10.1016/j.jmatprotec.2017.07.004

Li Y, Wu A, Li Q, et al. Mechanism of reheat cracking in electron beam welded Ti2AlNb alloys[J]. Transactions of Nonferrous Metals Society of China, 2019, 29(9): 1873 − 1881. doi: 10.1016/S1003-6326(19)65095-8

张骞, 毛智勇, 李立航, 等. 扫描预热对Ti2AlNb电子束接头组织及拉伸性能影响[J]. 材料热处理学报, 2021, 42(7): 186 − 196.

Zhang Qian, Mao Zhiyong, Li Lihang, et al. Effect of scanning preheating on microstructure and tensile properties of Ti2AlNb electron beam welding joints[J]. Ansactions of Materialsand Heat Treatment, 2021, 42(7): 186 − 196.

Kharitonov I A, Dragunov V K, Goncharov A L, et al. Electron beam welding features of cermet membranes[J]. Journal of physics. Conference Series, 2018, 1109(1): 12022.

王廷, 石志远, 李宁, 等. Cu₄₆Zr₄₆Al₈非晶合金电子束焊接特性分析[J]. 焊接学报, 2018, 39(8): 38 − 41. doi: 10.12073/j.hjxb.2018390197

Wang Ting, Shi Zhiyuan, Li Ning, et al. Characteristic of electron beam welded Cu₄₆Zr₄₆Al₈ BMGs[J]. Transactions of the China Welding Institution, 2018, 39(8): 38 − 41. doi: 10.12073/j.hjxb.2018390197

冯道臣, 郑文健, 高国奔, 等. AlCoCrFeNi_2.1高熵合金电子束焊接接头耐蚀性[J]. 焊接学报, 2022, 43(5): 43 − 48. doi: 10.12073/j.hjxb.20220101006

Feng Daochen, Zheng Wenjian, Gao Guoben, et al. Corrosion resistance of AlCoCrFeNi_2.1 high entropy alloy welded joint by electron beam welding[J]. Transactions of the China Welding Institution, 2022, 43(5): 43 − 48. doi: 10.12073/j.hjxb.20220101006

Chen G, Yin Q, Xi S, et al. Microstructure and properties of electron beam welded joints of tantalum and tungsten[J]. Welding in the World, 2018, 62: 775 − 782. doi: 10.1007/s40194-018-0600-z

Wang T, Zhang B, Chen G, et al. High strength electron beam welded titanium–stainless steel joint with V/Cu based composite filler metals[J]. Vacuum, 2013, 94: 41 − 47. doi: 10.1016/j.vacuum.2013.01.015

Guo S, Zhou Q, Peng Y, et al. Study on strengthening mechanism of Ti/Cu electron beam welding[J]. Materials & Design, 2017, 121: 51 − 60.

王廷, 张秉刚, 冯吉才, 等. 钢侧偏束电子束焊接纯铝/Q235异种金属接头试验[J]. 焊接学报, 2014, 35(6): 69 − 72.

Wang Ting, Zhang Binggang, Feng Jicai, et al. Experimental study of electron beam welded pure aluminium to Q235 steel joint with beam deflection[J]. Transactions of the China Welding Institution, 2014, 35(6): 69 − 72.

Zhang B, Chen G, Zhang C, et al. Structure and mechanical properties of aluminum alloy/Ag interlayer/steel non-centered electron beam welded joints[J]. Transactions of Nonferrous Metals Society of China, 2011, 21(12): 2592 − 2596. doi: 10.1016/S1003-6326(11)61096-0

Wang T, Wang Y, Zhang Y, et al. Influence of an AlSi5 filler wire on microstructures and mechanical properties of EBW-brazed CP-Al to 304SS joint[J]. Journal of Manufacturing Processes, 2020, 56: 12 − 18. doi: 10.1016/j.jmapro.2020.04.060

Zhang F, Wang T, Jiang S, et al. Microstructural characteristics and mechanical properties of an electron beam-welded Ti/Cu/Ni joint[J]. Journal of Materials Engineering and Performance, 2018, 27(5): 2354 − 2363. doi: 10.1007/s11665-018-3325-7

Song D, Wang T, Jiang S, et al. Influence of welding parameters on microstructure and mechanical properties of electron beam welded Ti60 to GH3128 joint with a Cu interlayer[J]. Chinese Journal of Aeronautics, 2021, 34(5): 39 − 46. doi: 10.1016/j.cja.2020.08.016

Zhang G, Chen G, Cao H, et al. Electron beam offset welding to ameliorate metallurgical compatibility and mechanical performance of refractory metal/Ni-base superalloy dissimilar alloys: Nb/GH3128[J]. Materials Science and Engineering:A, 2022, 840: 142966. doi: 10.1016/j.msea.2022.142966

Kar J, Roy S K, Roy G G. Effect of beam oscillation on electron beam welding of copper with AISI-304 stainless steel[J]. Journal of Materials Processing Technology, 2016, 233: 174 − 185. doi: 10.1016/j.jmatprotec.2016.03.001

Kar J, Dinda S K, Roy G G, et al. X-ray tomography study on porosity in electron beam welded dissimilar copper-304SS joints[J]. Vacuum, 2018, 149: 200 − 206. doi: 10.1016/j.vacuum.2017.12.038

Dinda S K, Kar J, Roy G G, et al. Texture mapping in electron beam welded dissimilar copper-stainless steel joints by neutron diffraction[J]. Vacuum, 2020, 181: 109668. doi: 10.1016/j.vacuum.2020.109668

Guo S, Zhou Q, Kong J, et al. Effect of beam offset on the characteristics of copper/304stainless steel electron beam welding[J]. Vacuum, 2016, 128: 205 − 212. doi: 10.1016/j.vacuum.2016.03.034

Zhang B, Zhao J, Li X, et al. Electron beam welding of 304 stainless steel to QCr0.8 copper alloy with copper filler wire[J]. Transactions of Nonferrous Metals Society of China, 2014, 24(12): 4059 − 4066. doi: 10.1016/S1003-6326(14)63569-X

Xu R, Li H, Hou Y, et al. Influencing mechanism of Al-Zn coating addition on interfacial microstructure and mechanical property of vacuum electron beam welded Mg/steel joint[J]. Vacuum, 2018, 158: 31 − 38. doi: 10.1016/j.vacuum.2018.09.026

[1]	DONG Yijun, WANG Yonggang, LI Dongya, ZHU Shanshan, XU Shuhong, WANG Yao. Heat treatment tailoring of microstructure and properties of laser cladding carbide reinforced nickel based coatings[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2024, 45(10): 59-68. DOI: 10.12073/j.hjxb.20231221002
[2]	YU Tingxiang, FENG Wei, CHEN Bo, ZHANG Qingsu, ZHOU Baojin, LIU Xin, LIU Manyu. Mechanism of heat treatment temperature on microstructure and properties in deposited metal of 1000 MPa grade high strength steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2024, 45(6): 97-104, 112. DOI: 10.12073/j.hjxb.20231103001
[3]	FAN Jiawei, LI Zhuoxuan, WU Haosheng, LIU Guangyin, ZHANG Jianxiao, HUANG Jiankang. Numerical study of the effect of carbide precipitation on the mechanical properties of ENiCrFe-3 pre-edge welded dissimilar steel welds[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2023, 44(6): 67-73. DOI: 10.12073/j.hjxb.20220721001
[4]	FU Lichao, ZHAO Xin, YANG Qingxiang. Precipitation behavior of carbide in hardfacing coating containing Nb[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(6): 39-43.
[5]	SU Yunhai, MA Dahai, QIN Hao, LIU Zhengjun. Formation mechanism of Cr₇C₃ hard phase under magnetic field[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(2): 63-66.
[6]	TANG Wenbo, GUO Yungang, ZHANG Yawei, WANG Hongrui. Microstructures and wear resistance of hardfacing alloy containing internally produced carbide particulates[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (8): 73-76.
[7]	LEI Yucheng, GU Kangjia, ZHU Qiang, CHEN Xizhang, JU Xin, CHANG Fenghua. Hardness and microstructure of China low activation martensitic steel fusion welded joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (11): 9-12.
[8]	ZHANG Tianhong, DU Yi, ZHANG Junxu. Effect of carbon and nitrogen on microstructure and properties of austenite weld metal[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (7): 81-84,88.
[9]	LU Fenggui, LU Binfeng, TANG Xinghua, YAO Shun. Chromium Carbide in situ synthesis by vacuum electron beam[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (6): 34-36.
[10]	ZHANG Yuan-bin, Ren deng-yi. Study on Carbides in Surfacing Layer[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2002, (5): 38-40.

Cited By

Cited by

Periodical cited type(2)

1.	曾道平，郑韶先，安同邦，代海洋，马成勇. 440 MPa级高强钢焊条熔敷金属组织与低温冲击韧性研究. 焊接学报. 2024(03): 120-128+136 . 本站查看
2.	李冬毓，孙万田. 稳定化热处理对厚壁TP347钢管焊接接头组织和性能的影响. 焊接. 2023(05): 45-50 .

Other cited types(1)

Get Citation

PDF

XML

Article views (829) PDF downloads (118) Cited by(3)

Turn off MathJax

Article Contents

Abstract

References

Research status and development trend of electron beam welding for advanced materials and dissimilar materials