Structure and mechanical property of wedge linear friction welding joint of TC17 titanium alloy

JIN Junlong; TAO Jun; JI Yajuan; ZHANG Chuanchen

doi:10.12073/j.hjxb.20200608003

TRANSACTIONS OF THE CHINA WELDING INSTITUTION > 2021 > 42(5): 18-22. > DOI: 10.12073/j.hjxb.20200608003

JIN Junlong, TAO Jun, JI Yajuan, ZHANG Chuanchen. Structure and mechanical property of wedge linear friction welding joint of TC17 titanium alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2021, 42(5): 18-22. DOI: 10.12073/j.hjxb.20200608003

Citation:

PDF (934 KB)

Structure and mechanical property of wedge linear friction welding joint of TC17 titanium alloy

Aeronautical Key Laboratory for Welding and Joining Technologies, AVIC Manufacturing Technology Institute, Beijing, 100024, China

More Information

Received Date: June 07, 2020
Available Online: April 12, 2021

Graphical Abstract

Abstract

Abstract

In order to solve the difficulty of forging and processing of aviation long-shaped integral parts, the method of wedge linear friction welding is proposed for piecewise combined fabrication, TC17 titanium alloy specimens were welded by wedge linear friction welding, according to the V shaped joints, the forming mechanism, microstructure and mechanical properties of the joints were analyzed. Results showed that the metal flow law in the welding process is significantly different from the common linear friction welding joint. the high temperature plastic metal gradually flows to the bottom tip with the wedge moving, resulting in a wider tip weld and a narrower upper part, the amount of the metal deformation in the thermal mechanical affected zone (TMAZ) of the forging side is greater than that in the vibration side. There is a wide TMAZ at the tip of the wedge in the joint, there is a heat affected area in this range, the tensile strength and the high cycle fatigue strength of the joints are equal to that of the base metal, and the specimens are all broken at the base metal area.
- titanium alloy,
- long-shaped integral parts,
- piecewise combine,
- linear friction welding,
- microstructure,
- mechanical property

FullText(HTML)

References (13)

References

王金海, 匡玉娟, 吴铎. 超长钛合金梁的数控高效加工[J]. 装备制造技术, 2015(2): 188 − 190. doi: 10.3969/j.issn.1672-545X.2015.02.070

Wang Jinhai, Kuang Yujuan, Wu Duo. Long beam CNC machining titanium alloy[J]. Equipment Manufacturing Technology, 2015(2): 188 − 190. doi: 10.3969/j.issn.1672-545X.2015.02.070

常川川, 张田仓, 李菊, 等. 高氧TC4/TC17钛合金线性摩擦焊接头组织特征及力学性能[J]. 焊接学报, 2019, 40(12): 109 − 114.

Chang Chuanchuan, Zhang Tiancang, Li Ju, et al. Microstructure and properties of linear friction welded joint of hyperoxia TC4/TC17 dissimilar titanium alloys[J]. Transactions of the China Welding Institution, 2019, 40(12): 109 − 114.

张传臣, 张田仓, 金俊龙. TC21+TC4-DT线性摩擦焊接头组织与力学性能试验[J]. 焊接学报, 2019, 40(12): 133 − 137.

Zhang Chuanchen, Zhang Tiancang, Jin Junlong. Microstructure and mechanical properties of linear friction welding of TC21/TC4-DT[J]. Transactions of the China Welding Institution, 2019, 40(12): 133 − 137.

王华明. 高性能大型能大型金属构件激光增材制造: 若干材料基础问题[J]. 航空学报, 2014, 35(10): 2690 − 2698.

Wang Huaming. Materials’ fundamental issues of laser additive manufacturing for high-performance large metallic components[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(10): 2690 − 2698.

付鹏飞. 大厚度钛合金电子束焊接接头力学行为及调控方法[D]. 武汉: 华中科技大学, 2016.

Fu Pengfei. Mechanical behaviors and regulation methods of heavy thickness titanium alloy joints with electron beam welding[D]. Wuhan: Huazhong University of Science & Technology, 2016.

吴红兵. 航空框类整体结构件铣削加工变形的数值模拟与实验研究[D]. 杭州: 浙江大学, 2008.

Wu Hongbing. Numerical simulation and experimental study on milling deformation of aircraft frame integral structure[D]. Hangzhou: Zhejiang university, 2008.

黄晓明, 孙杰, 李剑锋. 航空长梁整体结构件加工变形预测及校正分析[J]. 中国工程机械学报, 2017(3): 210 − 215.

Huang Xiaoming, Sun Jie, Li Jianfeng. Analysis of beam aerospace monolithic components machining deformation prediction and correction[J]. Chinese Journal of Construction Machinery, 2017(3): 210 − 215.

黄晓明. 铝合金航空整体结构件加工变形机理与预测研究[D]. 济南: 山东大学, 2015.

Huang Xiaoming. Deformation and prediction of aluminum alloy monolithic components in the milling[D]. Jinan: Shandong university, 2015.

路来骁, 孙杰, 韩雄, 等. 基于能量理论的航空整体结构件滚压变形校正载荷预测方法[J]. 航空学报, 2017, 38(12): 305 − 313.

Lu Laixiao, Sun Jie, Han Xiong, et al. Load prediction method of rolling distortion correction for monolithic aeronautical components based on energy theory[J]. Acta Aeronautica et Astronautica Sinica, 2017, 38(12): 305 − 313.

赵博, 李国元, 许广兴. 钛合金焊接技术在飞机制造中的应用和展望[J]. 航空制造技术, 2013(16): 122 − 125. doi: 10.3969/j.issn.1671-833X.2013.16.028

Zhao bo, Li Guoyuan, Xu Guangxing. Application and prospect of titanium alloy welding technology in aircraft manufacture[J]. Aeronautical Manufacturing Technology, 2013(16): 122 − 125. doi: 10.3969/j.issn.1671-833X.2013.16.028

金俊龙, 张田仓, 季亚娟, 等. 线性摩擦焊接方法、飞机框粱焊接方法及其设备: 中国, CN109202268A[P]. 2019-01-15.

Jin Junlong, Zhang Tiancang, Ji Yajuan, et al. Linear friction welding method, aircraft frame beam welding method and equipment. China, CN109202268A[P]. 2019-01-15.

季亚娟, 张田仓, 张连锋, 等. TC17钛合金线性摩擦焊接头组织及性能[J]. 焊接学报, 2019, 40(9): 156 − 160.

Ji Yajuan, Zhang Tiancang, Zhang Lianfeng, et al. Structure and mechanical property of TC17 linear friction welding joint[J]. Transactions of the China Welding Institution, 2019, 40(9): 156 − 160.

Clement B, Paul A C, Anthony R, McAndrew. A computationally efficient thermal modelling approach of the linear friction welding process[J]. Journal of Materials Processing Technology, 2018(252): 849 − 858.

[1]	DAI Xiang, SHI Lei, WU Chuansong, JIANG Yuanning, GAO Song, FU Li. Microstructure and mechanical properties of 2195-T6 Al–Li alloy joint prepared by friction stir welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(6): 25-34. DOI: 10.12073/j.hjxb.20210524002
[2]	GAO Chong, LI Shulei, LIU Zhenshan, ZHAO Jingwei, ZHAO Pizhi. Effect of travel speeds on microstructures and mechanical properties of friction-stir welded 5754 aluminum alloy sheets[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(2): 80-86. DOI: 10.12073/j.hjxb.20190921002
[3]	ZHOU Li, ZHANG Renxiao, SHU Fengyuan, HUANG Yongxian, FENG Jicai. Microstructure and mechanical properties of friction stir welded joint of Q235 steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(3): 80-84. DOI: 10.12073/j.hjxb.2019400076
[4]	PAN Rui, WANG Shanlin, LI Jianping, QIAN Luhong. Effect of processing parameters on mechanical properties of aluminum alloy joints welded by friction stir welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(11): 89-92,98.
[5]	ZHANG Hua, QIN Hailong, WU Huiqiang. Effect of process parameters on mechanical properties of friction stir welded 2195 Al-Li alloy joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(4): 19-23.
[6]	ZHENG Xiaomao, ZHANG Datong, ZHANG Wen, QIU Cheng. Effect of processing parameters on microstructure and mechanical properties of friction stir welded 7A04 aluminum alloy joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(1): 76-80.
[7]	ZHOU Guannan, SHEN Yifu, LI Bo, YAO Lei, WU Xiaowei. A cross-friction stir spot welding process of aluminum alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(5): 71-74.
[8]	ZHANG Dandan, QU Wenqing, YIN Na, YANG Mucong, CHEN Jie, MENG Qiang, CHAI Peng. Effect of process parameters on mechanical properties of friction stir welded Al-Li alloy lap joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (2): 84-88.
[9]	LI Xiawei, ZHANG Datong, QIU Cheng, ZHANG Wen. Effect of processing parameters on microstructure and mechanical properties of pure copper joints made by friction stir welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (9): 93-96.
[10]	WANG Chunyan, QU Wenqing, YAO Junshan, ZHAO Haiyun. Microstructures and mechanical properties of friction stir welded 2219-T87 aluminum alloy joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (10): 77-80,84.

Cited By

Cited by

Periodical cited type(21)

1.	张香云，雷朱坦，耿家源，刘刚. AZ31/LA141搅拌摩擦搭接焊工艺及性能研究. 兵器材料科学与工程. 2024(02): 24-29 .
2.	韩政，蒋少松，李升，吴洁璇. LZ91镁锂合金四层中空结构件连接工艺. 锻压技术. 2024(05): 135-141 .
3.	赵玉军. 加工速度对AZ31镁合金搅拌摩擦加工组织和力学性能的影响. 南阳理工学院学报. 2024(04): 120-124 .
4.	宋文杰，贺帅，沈奇江，吴宗育. LA141镁锂合金搅拌摩擦焊接过程温度场模拟. 陕西科技大学学报. 2023(01): 117-122 .
5.	雷朱坦，武冰冰，王津，耿家源，刘刚. AZ31/LA141搅拌摩擦搭接焊接头的组织与力学性能. 航空制造技术. 2023(08): 117-123 .
6.	夏聪聪，马立彩，鲁传洋，王锋，唐佳奇. LA103W镁锂合金TIG焊接接头组织与性能研究. 航天制造技术. 2023(05): 50-53 .
7.	刘沁钰，周利，戎校宇，杨海峰，赵洪运. 镁锂合金焊接技术研究现状. 材料导报. 2022(10): 150-159 .
8.	沙春生，张成聪，张毅，黄婉如. MLZ91镁锂合金激光焊接接头的显微组织与力学性能. 热加工工艺. 2022(13): 57-60 .
9.	刘刚，张玺，武冰冰，解芳，马振铎. 旋转速度对LZ91镁锂合金搅拌摩擦加工改性的影响. 热加工工艺. 2022(16): 18-21 .
10.	刘兰波，李源，柴艳红，刘娜，毛喆，陈敏豪. 镁锂合金制造工艺技术研究及应用现状. 航天制造技术. 2022(05): 74-78 .
11.	刘刚，方诚，朱磊，黄青娜，解芳. 正交试验法优化超轻LA141镁锂合金表面植酸处理工艺研究. 河北科技大学学报. 2022(06): 571-578 .
12.	姜炳春，付琴，胡少华，唐联耀，刘方方. LZ92镁锂合金激光焊接接头的显微组织与力学性能. 机械工程材料. 2021(01): 46-49 .
13.	肖雪，刘怀海，耿家源，刘刚. 挤压态Mg-9Li-xAl-0.6Y合金组织与力学性能研究. 有色金属工程. 2021(04): 1-7 .
14.	张菊梅，段鑫，王凯，张阳，蔡辉. 水热反应温度对LA103Z镁锂合金表面MAO/LDH复合膜层微观组织及耐蚀性的影响. 表面技术. 2021(05): 261-268+280 .
15.	刘刚，秦丽霞，张玺，彭银利，耿家源. LZ91镁锂合金搅拌摩擦加工的组织与力学性能. 热加工工艺. 2021(18): 56-60 .
16.	宋奎晶，董志波，李洋，李冬梅，朱帅，吕磊，罗俊睿. 镁锂合金搅拌摩擦焊及电子束焊研究. 电子机械工程. 2020(01): 46-50 .
17.	江雯，蒋璐瑶，黄伟九，郭非，董海澎. 退火处理对搅拌摩擦加工LZ91双相镁锂合金微观组织及力学性能的影响. 材料导报. 2020(Z1): 307-311 .
18.	苑晨晨，蒋健博，李慧，李福山，崔梦宇，徐荣正. 超轻双相LZ91镁锂合金搅拌摩擦搭接焊接技术研究. 有色金属工程. 2020(07): 26-31 .
19.	江雯，蒋璐瑶，黄伟九，郭非，董海澎. 退火处理对搅拌摩擦加工LZ91双相镁锂合金微观组织及力学性能的影响. 材料导报. 2020(S1): 307-311 .
20.	李慧，徐荣正，侯艳喜，国旭明. 镁锂合金的焊接技术及其在航天领域的应用. 热加工工艺. 2019(01): 1-4 .
21.	范蒙，张贵锋，柴东郎，王士元. 镁锂超轻合金搅拌摩擦焊及其机制的研究. 焊管. 2019(11): 25-30 .

Other cited types(11)

Get Citation

PDF

XML

Article views (576) PDF downloads (46) Cited by(32)

Turn off MathJax

Article Contents

Abstract

References

Structure and mechanical property of wedge linear friction welding joint of TC17 titanium alloy