Advanced Search
LI Suli, YANG Laixia, LU Bingheng. Analysis of different occlusal modes and bite force of mandible[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(11): 54-61, 82. DOI: 10.12073/j.hjxb.20200514001
Citation: LI Suli, YANG Laixia, LU Bingheng. Analysis of different occlusal modes and bite force of mandible[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(11): 54-61, 82. DOI: 10.12073/j.hjxb.20200514001
shu

Analysis of different occlusal modes and bite force of mandible

  • 1.

    College of Mechanical Engineering, Xi’an University of Science and Technology, Xi’an 710054, China

  • 2.

    The State Key Laboratory for Manufacturing Systems Engineering, Xi’an Jiaotong University, Xi’an 710049, China

More Information
  • Received Date: May 13, 2020
  • Available Online: February 02, 2021
    Graphical Abstract
    • Abstract
  • In order to study the stress of the mandible under different occlusal methods and different bite forces, based on the existing head CT data, the mandible was extracted through the medical software Mimics and the three-dimensional model was established, and the mandible was analyzed by redrawing the mesh, constructing the contour line, constructing the curved surface, constructing the grille, and fitting the surface. Through to the normal mandible and 3 d printing titanium implant restoration of mandibular were analyzed, and the results show that: in the 3 d printing on the titanium alloy implant restoration of mandibular adult male before and after loading teeth can withstand maximum force, mandibular by stress are less than normal mandible by stress.
    • FullText(HTML)
    • References (14)
  • Zuo H S, Li H, Qi L, et al. Formation mechanism of defects in aluminum alloy during micro-droplet deposition[J]. Rare Metal Materials and Engineering, 2013, 42(8): 1596 − 1600.
    Yang G, Qi L, Luo J, et al. Uniform droplet spray forming slightly soluble drop key online testing system[J]. Chinese Journal of Scientific Instrument, 2009, 30(3): 590 − 597.
    张晓萍, 颜永年. 熔融堆积成形过程温度场的模拟研究[J]. 中国机械工程, 2000, 11(10): 1101 − 1104.

    Zhang Xiaoping, Yan Yongnian. Simulation study of temperature field in the process of melting accumulation[J]. China Mechanical Engineering, 2000, 11(10): 1101 − 1104.
    王天明, 金烨, 习俊通. FDM 工艺过程中丝材的粘结机理与热学分析[J]. 上海交通大学学报, 2006, 40(7): 1230 − 1234.

    Wang Tianming, Jin Ye, Xi Juntong. Bonding mechanism and thermal analysis of wire during FDM process[J]. Journal of Shanghai Jiaotong University, 2006, 40(7): 1230 − 1234.
    李素丽, 魏正英, 卢秉恒. 基于ANSYS的车身柔性件点焊装配应力分析[J]. 焊接学报, 2014, 35(11): 14 − 18.

    Li Suli, Wei Zhengying, Lu Bingheng. Stress analysis of spot welding assembly of body flexible parts based on ANSYS[J]. Transactions of the China Welding Institution, 2014, 35(11): 14 − 18.
    Wang A, Xu C, Zhang C, et al. Experimental investigation of the properties of electrospun nanofibers for potential medical application[J]. Journal of Nanomaterials, 2015, 40(7): 1230 − 1238.
    李素丽, 魏正英, 卢秉恒. 高温钛合金微滴沉积成形有限元分析[J]. 郑州大学学报:工学版, 2014, 4: 124 − 128.

    Li Suli, Wei Zhengying, Lu Bingheng. Finite element analysis of droplet deposition forming of high temperature titanium alloy[J]. Journal of Zhengzhou University (Engineering Science), 2014, 4: 124 − 128.
    Orme M, Smith R. Enhanced aluminum properties by means of precise droplet deposition[J]. Journal of Manufacturing Science and Engineering, 2000, 122(3): 484 − 493.
    Li S, Wei Z, Du J, et al. The fusion process of successive droplets impinging onto a substrate surface[J]. Applied Physics A, 2015, 120(1): 35 − 42.
    Li S, Wei Z, Du J, et al. A numerical analysis on the metal droplets impacting and spreading out on the substrate[J]. Rare Metal Materials and Engineering, 2017, 46(4): 893 − 898.
    Wei P, Wei Z, Li S, et al. Splat formation during plasma spraying for 8 mol% yttria-stabilized zirconia droplets impacting on stainless steel substrate[J]. Applied Surface Science, 2014, 321: 538 − 547.
    Luo Q B, Huang C Z, Orme M. Study on stable delivery of charged uniform droplets for freeform fabrication of metal parts[J]. Science China Technological Sciences, 2011, 54(7): 1833 − 1840.
    程康杰. 修复下颌骨缺损的复合结构植入体优化设计及制备研究[D]. 杭州: 浙江工业大学, 2020.

    Cheng Kangjie. Optimal design and preparation of composite structure implant for repairing mandibular defect [D]. Hangzhou: Zhejiang University of Technology, 2020.
    李长春. 增材制造个性化钛合金在下颌骨缺损修复重建中的临床应用研究[D]. 南京: 南京医科大学, 2018.

    Li Changchun. Clinical application of additive manufacturing personalized titanium alloy in mandibular defect repair and reconstruction [D]. Nanjing: Nanjing Medical University, 2018.
    • Related Articles

  • Related Articles

    [1]YU Huiping, FENG Feng, ZHANG Yiliang, ZHAO Erbing. Numerical analysis of elimination stainless steel welding residual stress by over load tension[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(8): 119-123.
    [2]CHEN Zhanglan, XIONG Yunfeng. Numerical analysis on deformation of welded construction[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (5): 77-80.
    [3]YOU Min, LI Zhi, ZHAO Meirong, GUO Bin, YAN Jialing. Numerical analysis on stress distribution in adhesive-welded double lap joint of aluminum[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (11): 13-16.
    [4]LEI Yucheng, WANG Jian, ZHU Bin. Numerical analysis on N2-Ar plasma welding arc[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (8): 17-20.
    [5]LI Bo, WU Jiefeng. Numerical analysis for cutting plasma arc[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (9): 95-98.
    [6]LEI Yong-ping, HAN Feng-juan, Xia Zhi-dong, FENG Ji-cai. Numerical analysis of residual stress in ceramics/metal brazed joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2003, (5): 33-36,41.
    [7]Lü Jian-min, CHEN Huai-ning, LIN Quan-hong.. Numerical analysis of a method for relieving welding stresses of girth-weld pipes with small diameters[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2003, (4): 83-86.
    [8]HE Peng, FENG Ji-cai, QIAN Yi-yu, HAN Jie-chai, MAI Han-hui, JIA jin-guo. Numeric Analysis for Density Distribution of Element at the Interface in Diffusion Bonding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2002, (3): 80-82.
    [9]Dong Piming, Gu Fuming, Gao Jinqiang, Wang Erde, Tian Xitang. Numerical Analysis for Effect of Longitudinal Shrinkage of PerpendicularIntersection Weld on Flange Plane[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1999, (2): 132-138.
    [10]Zhao Xihua, Wu Lin, Liu Shubin, He Bing. Numerical analysis on force-amplification mechanism of welding tongs in spot-welding robots[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1993, (1): 35-39.

  • Cited by

    Periodical cited type(1)

    1. 杨书搏，刘元义，于圣洁，张悦，王丽娟，宋心宇. 基于逆向工程的设施农业就地翻土犁设计与试验. 中国农机化学报. 2023(12): 60-65 .

    Other cited types(1)

Catalog

    Get Citation
    PDF
    XML
    Article views (441) PDF downloads (13) Cited by(2)
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return