Advanced Search
ZHANG Yong, TANG Jiacheng, GE Zelong, QI Xiuling. Control on HAZ softening of 30CrMnSi joint by rotation impacting during welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2021, 42(5): 84-89. DOI: 10.12073/j.hjxb.20200309001
Citation: ZHANG Yong, TANG Jiacheng, GE Zelong, QI Xiuling. Control on HAZ softening of 30CrMnSi joint by rotation impacting during welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2021, 42(5): 84-89. DOI: 10.12073/j.hjxb.20200309001

Control on HAZ softening of 30CrMnSi joint by rotation impacting during welding

More Information
  • Received Date: March 08, 2020
  • Available Online: May 17, 2021
  • The effect on softening control of 30CrMnSi joint HAZ by rotation impacting during welding was studied. The method of rotation impacting was utilized to form the real time loading on the soften area during the welding process. Vickers hardness tester was used to show the hardness of the welded joint in the heat-affected zone with different rotation impacting parameters. The microstructures of the softening zone with and without rotation impacting were observed by inverted metallographic microscope. The distribution of carbon element in the softening zone was analyzed by EDS. The results show that the softening phenomenon of heat affected zone was effectively inhibited. The mechanical properties were significantly improved. The rotation impacting can increase obviously the hardness of the joint softening zone, the ferritic content in the softening zone is increased obviously, the distribution of carbon element eliminates local segregation.
  • Lan L, Qiu C, Zhao D, et al. Microstructural characteristics and toughness of the simulated coarse-grained heat affected zone of high strength low carbon bainitic steel[J]. Materials Science and Engineering: A, 2011, 529: 192 − 200. doi: 10.1016/j.msea.2011.09.017
    张熹, 董现春, 陈延清, 等. Q690CFD钢粗晶区再热脆化研究[J]. 钢铁, 2010, 45(11): 86 − 89.

    Zhang Xi, Dong Xianchun, Chen Yanqing, et al. Study on reheat embitterment in coarse grain region of heat affected zone of Q690CFD steel[J]. Iron & Steel, 2010, 45(11): 86 − 89.
    Liu B, Qu J X, Sun W J. Effects of thermal cycle on mechanical properties and fract-ography in HAZ of HQ130 steel[J]. Acta Me-tallurgica Sinica (English Letters), 2004, 17(3): 274 − 278.
    Kim S, Kang K, Lee C. Variation in microstructures and mechanical properties in the coarse-grained heat-affected zone of low-alloy steel with boron content[J]. Materials Science and Engineering: A, 2013, 559: 178 − 186. doi: 10.1016/j.msea.2012.08.072
    张楠, 田志凌, 张书彦, 等. 700 MPa微合金高强钢焊接软化机理及解决方案[J]. 钢铁研究学报, 2019, 31(3): 318 − 326.

    Zhang Nan, Tian Zhiling, Zhang Shuyan, et al. Welding softening mechanism and solution of 700 MPa micro alloy high strength steel[J]. Journal of Iron and Steel Research, 2019, 31(3): 318 − 326.
    李学军, 黄坚, 潘华, 等. QP1180高强钢薄板激光焊接接头的组织与成形性能[J]. 中国激光, 2019, 46(3): 72 − 79.

    Li Xuejun, Huang Jian, Pan Hua, et al. Micr-ostructure and forming performance of QP1180 high strength steel sheet laser welded joint[J]. China Laser, 2019, 46(3): 72 − 79.
    雷振, 王旭友, 滕彬, 等. JFE980S高强钢焊接接头软化分析[J]. 焊接学报, 2010, 31(11): 33 − 37.

    Lei Zhen, Wang Xuyou, Teng Bin, et al. Sof-tening analysis of welded joints in high strength steel[J]. Transactions of the China Welding Institution, 2010, 31(11): 33 − 37.
    蔡啸涛. Q690MPa级高强钢焊接方法与工艺要点分析[J]. 科技创新导报, 2018, 15(3): 112 − 114.

    Cai Xiaitao. Analysis on welding method and process points of Q690MPa high strength ste-el[J]. Science and Technology Innovation Guide, 2018, 15(3): 112 − 114.
    安同邦, 田志凌, 单际国, 等. 后热温度对1 000 MPa级高强钢焊缝组织与性能的影响[J]. 机械工程学报, 2015, 51(4): 40 − 46. doi: 10.3901/JME.2015.04.040

    An Tongbang, Tian Zhiling, Shan Jiguo, et al. Effect of post-weld heat treatment temperature on weld microstructure and properties of 1000MPa high strength steel[J]. Journal of Mechanical Engineering, 2015, 51(4): 40 − 46. doi: 10.3901/JME.2015.04.040
    范成磊, 方洪渊, 田应涛, 等. 随焊冲击碾压对LY12CZ铝合金接头组织和性能的影响[J]. 材料工程, 2004(10): 24 − 28. doi: 10.3969/j.issn.1001-4381.2004.10.006

    Fan Chenglei, Fang Hongyuan, Tian Yingtao, et al. Effect of impact rolling with welding on microstructure and properties of LY12CZ aluminum alloy joints[J]. Materials Engineering, 2004(10): 24 − 28. doi: 10.3969/j.issn.1001-4381.2004.10.006
    管建军, 杨男, 钟宏远, 等. 随焊加载冷源或位移控制载荷的无应力焊接方法[J]. 焊接学报, 2020, 41(1): 91 − 96.

    Guan Jianjun, Yang Nan, Zhong Hongyuan, et al. Principle of stress-free welding with cold source or displacement-controled load[J]. Transactions of the China Welding Institution, 2020, 41(1): 91 − 96.
    徐祖耀. 应力作用下的相变[J]. 热处理, 2004(2): 1 − 17. doi: 10.3969/j.issn.1008-1690.2004.02.001

    Xu Zuyao. Phase transition under stress[J]. Heat Treatment, 2004(2): 1 − 17. doi: 10.3969/j.issn.1008-1690.2004.02.001
    张勇, 綦秀玲. 随焊冲击旋转挤压控制LD10薄板件焊接变形和热裂纹的研究[J]. 中国机械工程, 2013, 24(13): 1817 − 1820. doi: 10.3969/j.issn.1004-132X.2013.13.022

    Zhang Yong, Qi Xiuling. Control of welding residual deformation and hot crack of LD10 thin plate by welding with impacting rotate on compression[J]. China Mechanical Engineering, 2013, 24(13): 1817 − 1820. doi: 10.3969/j.issn.1004-132X.2013.13.022
    李立英. ASTM4130钢焊接热影响区组织与性能研究[D]. 北京: 中国石油大学, 2011.

    Li Liying. Study on microstructure and properties in heat-affected zone of ASTM4130 steel[D]. Beijing: China University of Petroleum, 2011.
    万响亮, 李光强, 吴开明. 低合金高强钢针状铁素体组织特征和形成机理[J]. 钢铁研究学报, 2016, 28(6): 1 − 12.

    Wan Xiangliang, Li Guangqiang, Wu Kaiming. Microstructure characteristics and formation mechanism of acicular ferrite in high-strength low-alloy steels[J]. Journal of Iron and Steel Research, 2016, 28(6): 1 − 12.
    魏世同, 孙健, 刘景武, 等. V含量及回火工艺对高强钢TIG焊熔敷金属组织性能的影响[J]. 焊接学报, 2020, 41(11): 1 − 6. doi: 10.12073/j.hjxb.20200116001

    Wei Shitong, Sun Jian, Liu Jingwu, et al. Effect of V content and tempering treatment on microstructure and mechanical properties of the high strength steel TIG weld metal[J]. Transactions of the China Welding Institution, 2020, 41(11): 1 − 6. doi: 10.12073/j.hjxb.20200116001
    冯端. 金属物理学(第一卷 结构与缺陷)[M]. 北京: 科学出版社, 2017.

    Feng Duan. Physics of metals (volume 1, structure and defects)[M]. Beijing: Science Press, 2017.
  • Related Articles

    [1]YANG Jing, XUE Peng, ZHANG Yongfeng, FANG Xu, JIANG Chenyu, SHI Kai. Microstructure and properties of boron carbide ceramic brazed joints with high nitrogen steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2024, 45(5): 113-118. DOI: 10.12073/j.hjxb.20230601001
    [2]FANG Naiwen, HUANG Ruisheng, YAN Dejun, YANG Yicheng, MA Yiming, LENG Bing. Effect of welding heatinput on microstructure and properties of MAG welded joint for low nickel high nitrogen austenitic stainless steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2021, 42(1): 70-75. DOI: 10.12073/j.hjxb.20200502001
    [3]MING Zhu, WANG Kehong, WANG Wei, WANG Youqi. Effect of cooling rate on the microstructure and mechanical properties of high nitrogen stainless steel weld metal[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(10): 31-35. DOI: 10.12073/j.hjxb.2019400259
    [4]MING Zhu, WANG Kehong, WANG Wei, FAN Chenglei, WANG Youqi. Effects of nitrogen content and welding current on microstructure and properties of the weld of high nitrogen austenite steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(1): 104-108. DOI: 10.12073/j.hjxb.2019400021
    [5]LI Dayong, YANG Dongqing, WANG Ping, ZHANG Guangjun. Analysis on microstructure and properties of under-matching weld joint of high strength steel 10Ni5CrMoV[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2017, 38(5): 87-91. DOI: 10.12073/j.hjxb.20170519
    [6]JING Hao, WANG Kehong, QIANG Wei, KONG Jian. Influence of N-content on microstructure and mechanical properties of PMIG welding joints of high nitrogen steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2017, 38(4): 95-98. DOI: 10.12073/j.hjxb.20170422
    [7]ZHAO Hongyun, LIU Hongwei. Microstructure and properties of TIG welded 22MnB5 ultra high strength steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(2): 67-69,78.
    [8]ZHAO Lin, TIAN Zhiling, PENG Yun, XU Lianghong, LI Ran. Laser welding of high nitrogen steel 1Cr22Mn16N Ⅲ.Microstructure and mechanical properties of welding heat-affected zone[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (12): 26-30.
    [9]ZHAO Lin, TIAN Zhiling, PENG Yun, ZHAO Xiaobing, QI Yanchang. Laser welding of high nitrogen steel 1Cr22Mn16N-Ⅱ.microstructure and mechanical properties of weld metal[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (9): 80-82,86.
    [10]FU Rui-dong, LI Liang-yu, ZHENG Yang-zeng. TIG Welding of High Manganese Austenitic Steel for Super Cryogenic Application[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2001, (3): 21-24.
  • Cited by

    Periodical cited type(5)

    1. 周凡,顾介仁,王克鸿. 等离子弧增材交织结构的组织与力学性能. 焊接. 2023(01): 16-21 .
    2. 李文斌. 城市轨道交通车辆高强钢焊接用焊丝的选用方法. 焊接技术. 2022(03): 80-83 .
    3. 周杰,张明渝,李志洋,张建,范霁康,王克鸿. 高氮不锈钢与675高强钢焊接接头微观组织与力学性能. 焊接. 2022(02): 6-10 .
    4. 杨东青,张建,范霁康,周赵,王克鸿. 高氮奥氏体不锈钢与603马氏体高强钢焊接接头组织及性能. 兵工学报. 2022(08): 1990-1997 .
    5. 郭顺,王鹏翔,周琦,朱军,顾介仁. 等离子弧增材制造双金属交织结构微观组织及力学性能. 焊接学报. 2021(03): 14-19+98 . 本站查看

    Other cited types(1)

Catalog

    Article views (378) PDF downloads (20) Cited by(6)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return