Citation: | YAN Yi, LIU Chuan, WANG Chunjing, SHEN Jiabing. Surface stress correction of the thick welded plate measured by contour method using eigenstrain method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(11): 82-86. DOI: 10.12073/j.hjxb.2019400292 |
武奇, 邱惠清, 王伟生. 基于结构应力的焊接接头疲劳分析[J]. 焊接学报, 2009, 30(3):101-105 Wu Qi, Qiu Huiqing, Wang Weisheng. Fatigue analysis of welded joints by method of structural stress[J]. Transactions of the China Welding Institution, 2009, 30(3):101-105
|
Smith D J, Bouchard P J, George D. Measurement and prediction of residual stresses in thick-section steel welds[J]. Journal of Strain Analysis for Engineering Design, 2000, 35(4):287-305.
|
刘川, 冯俊, 朱海洋, 等. 基于轮廓法测试惯性摩擦焊接头内部残余应力[J]. 焊接学报, 2015, 36(6):1-4 Liu Chuan, Feng Jun, Zhu Haiyang, et al. Internal residual stress measurement of inertia friction welding joints based on contour method[J]. Transactions of the China Welding Institution, 2015, 36(6):1-4
|
Hatamleh O, Dewald A. An investigation of the peening effects on the residual stresses in friction stir welded 2195 and 7075 aluminum alloy joints[J]. Journal of Materials Processing Technology, 2009, 209(10):4822-4829.
|
Tosun N. The effect of the cutting parameters on performance of WEDM[J]. Ksme International Journal, 2003, 17(6):816-824.
|
Hill M R. Determination of residual stress based on the estimation of eigenstrain[D]. Stanford:Stanford University, 1996.
|
Jun T S, Korsunsky A M. Evaluation of residual stresses and strains using the eigenstrain reconstruction method[J]. International Journal of Solids and Structures, 2010, 47(13):1678-1686.
|
Kartal M E, Kang Y H, Korsunsky A M, et al. The influence of welding procedure and plate geometry on residual stresses in thick components[J]. International Journal of Solids and Structures, 2016, 80:420-429.
|
Korsunsky A M, Regino G M, Nowell D. Variational eigenstrain analysis of residual stresses in a welded plate[J]. International Journal of Solids & Structures, 2007, 44(13):4574-4591.
|
Dong P, Hong J K, Bouchard P J. Analysis of residual stresses at weld repairs[J]. International Journal of Pressure Vessels and Piping, 2005, 82(4):258-269.
|
Song X, Kyriakoglou I, Korsunsky A M. Analysis of residual stresses around welds in a combustion casing[J]. Procedia Engineering, 2009, 1(1):189-192.
|
Sarkani S, Tritchkov V, Michaelov G. An efficient approach for computing residual stresses in welded joints[J]. Finite Elements in Analysis and Design, 2000, 35(3):247-268.
|
Mollicone P, Camilleri D, Gray T G F, et al. Simple thermos-elastic-plastic models for welding distortion simulation[J]. Journal of Materials Processing Technology, 2006, 176(1-3):77-86.
|
[1] | HUANG Gang, ZHANG Qingdong, WANG Chunhai, ZHANG Boyang, KONG Ning. Experimental research on the blind hole-drilling method for measuring residual stress of steel plate[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(9): 49-59, 80. DOI: 10.12073/j.hjxb.20200403002 |
[2] | WANG Ying, WANG Dongpo, DING Jikun, DENG Caiyan, WU Liangchen. Design method and error analysis of thin plate butt welded joint specimen for ultrasonic fatigue test[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(1): 71-74. DOI: 10.12073/j.hjxb.2019400014 |
[3] | GAN Shiming, HAN Yongquan, CHEN Furong. Analysis on error factors of welding residual stress measured by hole drilling method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(10): 48-53. DOI: 10.12073/j.hjxb.2018390247 |
[4] | LIU Chuan, FENG Jun, ZHU Haiyang, LI Liangbi. Internal residual stress measurement of inertia friction welding joints based on contour method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(6): 1-4. |
[5] | LI Xueqin, JIANG Honghai, YIN Guofu, HU Xiaobing. Research on decoupling of trajectory error compensation for multi-joint welding robot[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (10): 63-66. |
[6] | CHEN Hongtang, LI Haichao, GAO Hongming, WU Lin. Error analysis of seam tracking in master-slave robot remote welding based on ergonomics[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (5): 9-12. |
[7] | XIE Hongwei, KUANG Yongcong, OUYANG Gaofei, ZHANG Xianmin. Solder joint inspection method regarding misalignment[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (7): 30-34. |
[8] | LI Hao, LIU Yihua. Residual stress field in hole-drilling method-part II:application[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (10): 33-36. |
[9] | ZHANG Zhong-dian, LI Dong-qing, TANG Da-ping, LI Xue-jun. Measures for decreasing errors of ANN models of spot welding quality monitor[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2004, (5): 113-116. |
[10] | Chen Huaining, Chen Liangshan, Dong Xiuzhong. Drilling strains in measuring residual stress with hole-drilling strain-gage method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1994, (4): 276-280. |