Advanced Search
YU Weiyuan, WU Baolei, SUN Xuemin, LEI Zhen, SUN Jungang. Wetting behavior of Fe/Sn system under ultrasonic[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(2): 12-17. DOI: 10.12073/j.hjxb.20190708002
Citation: YU Weiyuan, WU Baolei, SUN Xuemin, LEI Zhen, SUN Jungang. Wetting behavior of Fe/Sn system under ultrasonic[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(2): 12-17. DOI: 10.12073/j.hjxb.20190708002

Wetting behavior of Fe/Sn system under ultrasonic

More Information
  • Received Date: July 07, 2019
  • Available Online: July 12, 2020
  • Using a wetting balance technique, pure Sn was used to wet iron substrate assisted by ultrasonic treatment. By testing the wetting force curve of the tin-iron system, it indicates the wet process of the brazing filler metal to the base metal, the combination of the propagation characteristics of the ultrasonic wave and the micro-morphology of the base metal after wetting. The wetting behavior and interfacial reaction mechanism of the solder droplets on the surface of the iron were studied with the ultrasonic effects. The results reveal that ultrasonic assist in the wetting force test of the Sn-Quartz system can increase the wetting force of the brazing filler metal to the base metal and in the wetting force test of the reaction system can accelerate the wetting time and increase the wetting force of the brazing filler metal to the base metal. With the increase of ultrasonic time and ultrasonic power wetting time of solder is reduced, the wetting force is increased and solid/liquid interface reaction is intensified, interface generated more and more thick more and more dense intermetallic compound, the base metal surface relative to the original surface become rough, thus easier to wetting process, and the reduction of the surface tension of the base metal, so that the wetting force is increased.
  • Kim T H, Yum J, Hu S J, et al. Process robustness of single lap ultrasonic welding of thin, dissimilar materials[J]. Manufacturing Technology, 2011, 60(1): 17 − 20. doi: 10.1016/j.cirp.2011.03.016
    Panteli A, Robson J D, Brough I, et al. The effect of high strain rate deformation on intermetallic reaction during ultrasonic welding aluminium to magnesium[J]. Materials Science & Engineering A, 2012, 556: 31 − 42.
    Guo W B, Luan T M, Leng X S, et al. Interfacial microstructure evolution and mechanical properties of Al/Sn joints by ultrasonic-assisted soldering[J]. Transactions of Nonferrous Metals Society of China, 2017, 27(4): 962 − 970. doi: 10.1016/S1003-6326(17)60112-2
    杨景卫, 曹彪, 卢清华. 超生-电阻复合焊接方法及界面行为[J]. 焊接学报, 2018, 39(3): 26 − 30.

    Yang Jingwei, Cao Biao,Lu Qinghua. Investigation on the interfacial behavior of hybrid ultrasonic resistance welding[J]. Transactions of the China Welding Institution, 2018, 39(3): 26 − 30.
    Xu Z, Yan J, Wang C, et al. Substrate oxide undermining by a Zn-Al alloy during wetting of alumina reinforced 6061 Al matrix composite[J]. Materials Chemistry and Physics, 2008, 112(3): 831 − 837. doi: 10.1016/j.matchemphys.2008.06.056
    Xu Z, Ma L, Yan J, et al. Wetting and oxidation during ultrasonic soldering of an alumina reinforced aluminum-copper-magnesium (2024 Al) matrix composite[J]. Composites Part A: Applied Science and Manufacturing, 2012, 43(3): 407 − 414.
    Xiao Y, Ji H, Li M, et al. Ultrasound-assisted brazing of Cu/Al dissimilar metals using a Zn-3Al filler metal[J]. Materials & Design, 2013, 52: 740 − 747.
    王玲, 肖勇, 万超, 等. Al/Zn-3Al/Al超声波辅助钎焊接头焊合率及显微组织[J].焊接学报,2017,38(12):90-94.

    Wang Ling, Xiao Yong, Wan Chao, et al. Bonding rate and microstructure of Al/ Zn-3Al /Al ultrasonic assisted brazing joint [J]. Transactions of the China Welding Institution, 2017, 38(12): 90-94.
    Zhao W W, Yan J C, Yang W, et al. Capillary filling process during ultrasonically brazing of aluminium matrix composites[J]. Science and Technology of Welding and Joining, 2008, 13(1): 66 − 69. doi: 10.1179/174329308X271742
    俞伟元, 颜泽华, 刘新亚, 等. 超声作用下Sn-Ag-Ti(-Al)活性钎料在石墨表面的铺展行为[J]. 稀有金属材料与工程, 2018, 47(9): 279 − 285.

    Yu Weiyuan, Yan Zehua, Liu Xinya, et al. Spreading behavior of Sn-Ag-Ti (-Al) active filler on graphite surface under ultrasonic action[J]. Rare metal Materials and Engineering, 2018, 47(9): 279 − 285.
    Ji H, Li L, Wang L, et al. Microstructures and properties of the Fe-based amorphous foil/aluminum dissimilar joint by ultrasonic-assisted soldering[J]. Welding in the World, 2015, 59(5): 623 − 628. doi: 10.1007/s40194-015-0237-0
    张洋, 宋博瀚, 闫久春, 等. 超声波超声振动下SiC陶瓷颗粒与Zn-Al液态合金的相互作用机制[J]. 材料工程, 2016, 44(2): 28 − 34. doi: 10.11868/j.issn.1001-4381.2016.02.005

    Zhang Yang, Song Bohan, Yan Jiuchun, et al. Interaction mechanism between SiC ceramic particles and Zn-Al liquid alloy under ultrasonic vibration[J]. Materials Engineering, 2016, 44(2): 28 − 34. doi: 10.11868/j.issn.1001-4381.2016.02.005
    Wang H, Gao F, Ma X, et al. Reactive wetting of solders on Cu and Cu6Sn5/Cu3Sn/Cu substrates using wetting balance[J]. Scripta Materialia, 2006, 55(9): 823 − 826. doi: 10.1016/j.scriptamat.2006.07.017
    Tamura S, Tsunekawa Y, Okumiya M, et al. Ultrasonic cavitation treatment for soldering on Zr-based bulk metallic glass[J]. Journal of Materials Processing Technology, 2008, 206(1-3): 322 − 327. doi: 10.1016/j.jmatprotec.2007.12.032
    尹立孟, 冼健威, 周进, 等. Sn基钎料与Cu和Al基板的润湿性比较研究[J]. 电子元件与材料, 2011, 30(1): 75 − 78. doi: 10.3969/j.issn.1001-2028.2011.01.020

    Yin Limeng, Xian Jianwei, Zhou Jin, et al. Comparative study on wettability of Sn based filler metals with Cu and Al substrates[J]. Electronic Components and Materials, 2011, 30(1): 75 − 78. doi: 10.3969/j.issn.1001-2028.2011.01.020
    沈浩然. 超声波作用下Sn对Al的铺展润湿与界面接合研究[D]. 哈尔滨: 哈尔滨工业大学, 2012.
    许志武, 闫久春, 王昌胜, 等. 超声波的传播特性及其对钎料润湿行为的影响[J]. 焊接学报, 2010, 31(12): 5 − 8.

    Xu Zhiwu, Yan Jiuchun, Wang Changsheng, et al. Ultrasonic propagation characteristics and its influence on wetting behavior of solder[J]. Transactions of the China Welding Institution, 2010, 31(12): 5 − 8.
    范明月. 超声耦合下的Al/C液固界面润湿与传质研究[D]. 沈阳: 东北大学, 2014.
    Eustathopoulos N. Dynamics of wetting in reactive metal/ceramic systems[J]. Acta Materialia, 1998, 46(7): 2319 − 2327.
    Protsenko P, Terlain A, Traskine V, et al. The role of intermetallics in wetting in metallic systems[J]. Scripta Materialia, 2001, 45(12): 1439 − 1445. doi: 10.1016/S1359-6462(01)01181-2
    Wu C C, Roberts P H. Shock-wave propagation in a sonoluminescing gas bubble[J]. Physical Review Letters, 1993, 70(22): 3424 − 3427. doi: 10.1103/PhysRevLett.70.3424
    Xu Z, Li Z, Zhong S, et al. Wetting mechanism of Sn to Zr50.7Cu28Ni9Al12.3 bulk metallic glass assisted by ultrasonic treatment[J]. Ultrasonics Sonochemistry, 2018, 48: 207 − 217. doi: 10.1016/j.ultsonch.2018.05.036
  • Cited by

    Periodical cited type(0)

    Other cited types(4)

Catalog

    Article views (277) PDF downloads (15) Cited by(4)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return