Advanced Search
LI Zhigang, XU Xiang, HUANG Wei, LI Yang. Spectral diagnosis assisted underwater wet welding plasma composition calculation[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(6): 37-41. DOI: 10.12073/j.hjxb.20190701002
Citation: LI Zhigang, XU Xiang, HUANG Wei, LI Yang. Spectral diagnosis assisted underwater wet welding plasma composition calculation[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(6): 37-41. DOI: 10.12073/j.hjxb.20190701002
shu

Spectral diagnosis assisted underwater wet welding plasma composition calculation

  • Key Laboratory of Vehicles and Equipment of the Ministry of Education, East China Jiaotong University, Nanchang, 330013, China

More Information
  • Received Date: June 30, 2019
  • Available Online: September 26, 2020
    Graphical Abstract
    • Abstract
  • There has been very little calculation of the composition of underwater wet welding plasma. The article collects and analyzes the arc spectral information by setting up an underwater wet welding experiment platform. Based on the results of the diagnosis and the study of the bubble composition, the particles considered in the calculation were determined. On this basis, Analysis of the equilibrium equation of underwater arc welding by arc plasma, Based on the law of mass action, five basic particles are selected, and other particles are represented by these five basic particles, substituted into the conservation equations, and the number density of each particle is calculated under specific pressure and temperature. This method and the traditional method of solving the Saha equation and other conservation equations to obtain different plasma particle density. The results show that the particles occupying the main components in different temperature zones have different effects on arc plasma. It can provide theoretical basis and basis for further study of underwater wet welding arc stability and welding quality, and can also be combined with spectral information for temperature calculation and particle determination in main temperature range.
    • FullText(HTML)
    • References (15)
  • 马云鹤, 李至尊, 孙立, 等. 水下湿法焊接技术研究进展[J]. 热加工工艺, 2018, 47(17): 10 − 13.

    Ma Yunhe, Li Zhizun, Sun Li, et al. Research progress of unde- rwater wet welding technology[J]. Hot Working Technology, 2018, 47(17): 10 − 13.
    Sun Q J , Cheng W Q , Liu Y B , et al. Microstructure and me- chanical properties of ultrasonic assisted underwater wet welding joints[J]. Materials & Design, 2016(103): 63 − 70.
    Bai Qiang, Zou Yan, Kong Xiangfeng, et al. The influence of the corrosion product layer generated on the high strength low-alloy steels welded by underwater wet welding with stainless steel electrodes in seawater[J]. Journal of Ocean University of China, 2017, 16(01): 49 − 56. doi: 10.1007/s11802-017-3057-6
    Grzegorz Rogalski, Dariusz Fydrych, Jerzy Łabanowski. Und-erwater wet repair welding of API 5L X65M pipeline steel[J]. Polish Maritime Research, 2017, 24(s1): 188 − 194.
    王伟宗, 荣命哲, Anthony B MURPHY, 等. 平衡态电弧等离子体统计热力学属性的计算[J]. 西安交通大学学报, 2011, 45(4): 86 − 92.

    Wang Weizong, Rong Minzhe, Anthony B MURPHY, et al. Calculation of statistical thermodynamic properties of equilibrium arc plasma[J]. Journal of Xi'an Jiaotong University, 2011, 45(4): 86 − 92.
    张勇. 水下湿法药芯焊丝焊接过程熔滴过渡、气泡行为以及焊缝成形的研究[D].山东: 山东大学, 2018.
    Wang G R, Yang Q M. Spectroscopic study of temperature of underwater welding arc[J]. Chinese Journal of Mechanical Engineering, 1997, 33(2): 93 − 98.
    史耀武, 张新平, 雷永平. 严酷条件下的焊接技术[M].北京: 机械工业出版社, 2000.
    汤文辉, 徐彬彬, 冉宪文, 等. 高温等离子体的状态方程及其热力学性质[J]. 物理学报, 2017, 66(3): 29 − 46.

    Tang Wenhui, Xu Binbin, Ran Xianwen, et al. Equation of state of high temperature plasma and its thermodynamic properties[J]. Acta Physica Sinica, 2017, 66(3): 29 − 46.
    郭伟, 郭宁, 杜永鹏, 等. 不同水下环境介质对水下焊接电弧等离子体成分及温度的影响[J]. 焊接学报, 2016, 37(10): 13 − 16.

    Guo Wei, Guo Ning, Du Yongpeng, et al. Effect of different underwater environmental media on plasma composition and temperature of underwater welding arc[J]. Transactions of the China Welding Institution., 2016, 37(10): 13 − 16.
    邱德川. 大气压下空气电弧组分与折射率计算及其在莫尔偏折中的应用[D]. 西安: 西南交通大学, 2017.
    Mayer L A, Mayer M G. Statisticla mechanicals[M]. New York, USA: Wiley, 1940.
    Ralchenk O Y, Kramida A E, Reader J, et al. NIST atomicspectradatabase[DB/OL].[2019-07-01].http://www.nist.go-v/pml/data/asd.cfm.
    Huber K, Herzberg G. Molecular spectra and molecular structure:IV Constants of diatomic molecules[M]. New York, USA: Van Nostrand Reinhold, 1979.
    杨乾铭. 水下焊接电弧温度的光谱诊断研究[D].广州: 华南理工大学, 1996.
    • Related Articles

  • Related Articles

    [1]GUO Wei, GUO Ning, DU YongPeng, WANG Fu, FENG Jicai. Effect of different underwater environment media on composition and temperature of underwater welding arc plasma[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(10): 13-16.
    [2]JIANG Qixiang, ZOU Yirong, DU Dong. Spatial distribution measurement of gas tungsten arc current density based on image analysis[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(8): 101-104.
    [3]SUN Chengqi, GAO Yang, YANG Deming, CHEN Zhenyu. Spectral diagnostics of electron number density in plasma jet under atmosphere thermal plasma spray[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(4): 75-78.
    [4]HUANG Yong, WANG Xinxin, QU Huaiyu, FAN Ding. Effects of arc parameters on arc anode current density of coupling AA-TIG arc[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(2): 5-9.
    [5]LUO Yi, XU Huibin, LI Chuntian, WU Guangfeng. Heat source modeling and power density analysis for vacuum electron beam welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (9): 73-76.
    [6]SHEN Chunlong, ZHANG Meiping, ZHOU Qi, XU Jianhua, WANG Kehong. 3D transient simulation and computation for electron beam energy density spatial distribution[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (9): 1-4.
    [7]SHI Yu, NIE Jing, HUANG Jiankang, LU Lihui, FAN Ding. Evaluation method of pulsed MIG welding of aluminum alloy based on probability density of arc voltage signal[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (5): 13-16.
    [8]LIU Weiwei, ZHANG Liwen, ZHANG Quanzhong, ZHU Wenhui, QU Shen. Numerical simulation of effect of different energy density on inertia friction welding process[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (7): 72-76.
    [9]QI Fang-juan, HUO Li-xing, ZHANG Yu-feng, JING Hong-yang. Basic mechanical behaviors of high-density polyethylene electro-fusion welded joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2003, (1): 23-26.
    [10]Zhao Pengsheng, Wang Yaowen. Distribution model for current density of plasma welding arcs[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1991, (3): 182-188.

  • Cited by

    Periodical cited type(0)

    Other cited types(2)

Catalog

    Get Citation
    PDF
    XML
    Article views (461) PDF downloads (9) Cited by(2)
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return