Advanced Search
LIANG Zhimin1, SHI Kangning1, LI Weipo1, CAO Yi1, LU Hao2. Microstructure and mechanical properties of water-cooled MIG welded joints of 6N01 aluminium alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(9): 25-30. DOI: 10.12073/j.hjxb.2018390218
Citation: LIANG Zhimin1, SHI Kangning1, LI Weipo1, CAO Yi1, LU Hao2. Microstructure and mechanical properties of water-cooled MIG welded joints of 6N01 aluminium alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(9): 25-30. DOI: 10.12073/j.hjxb.2018390218

Microstructure and mechanical properties of water-cooled MIG welded joints of 6N01 aluminium alloy

More Information
  • Received Date: April 07, 2017
  • In order to alleviate the softening problem of 6N01 aluminum alloy during fusion welding, the microstructure and mechanical properties of MIG welded joints with water accelerated cooling were studied and compared with the joints under natural cooling conditions. The results of metallographic experiments showed that the partially melted zones of filling pass and cover pass were narrowed by water cooling. The columnar grain regions of the weld near the fusion line were widened and the equiaxed grains in the weld were refined. Microhardness test results showed that the softening zone of the joint was significantly narrowed and the hardness increased under water cooling conditions. The TEM morphology of the softened zone showed that the sizes of β' precipitation were also reduced. The yield strengths and tensile strengths of MIG welded joints were also improved by water cooling. The experimental results confirmed that water cooling can optimize the microstructure and improve the mechanical properties of MIG welded 6N01 aluminum alloy joints.
  • 刘雪松, 李书齐, 王苹, 等. 6N01-T5铝合金焊接接头疲劳断裂分析[J]. 焊接学报, 2009, 30(10):25-27 Liu Xuesong, Li Shuqi, Wang Ping, et al. Fatigue failure analysis of 6N01-T5 aluminum alloy welded joints[J]. Transactions of the China Welding Institution, 2009, 30(10):25-27
    彭建, 周绸, 张丁非. 高速列车用6N01铝合金焊接接头的组织与性能[J]. 金属热处理, 2010, 35(11):33-34 Peng Jian, Zhou Chou, Zhang Dingfei. Microstructure and properties of welded joints of 6N01 aluminum alloy for high-speed train[J]. Heat Treatment of Metals, 2010, 35(11):33-34
    Malin V. Study of metallurgical phenomena in the HAZ of 6061-T6 aluminum welded joints[J]. Welding Journal, 1995, 74(9):305s -318s.
    朱东晖, 陈江华, 刘春辉, 等. Al-Mg-Si与Al-Zn-Mg合金异质焊接接头力学性能和微观结构的关系[J]. 中国有色金属学报, 2014, 24(2):294-300 Zhu Donghui, Chen Jianghua, Liu Chunhui, et al. Relationship between mechanical properties and microstructure of Al-Mg-Si and Al-Zn-Mg dissimilar welded joint[J]. The Chinese Journal of Nonferrous Metals, 2014, 24(2):294-300
    路浩. 高速列车用厚板铝合金CMT焊接工艺[J]. 焊接学报, 2015, 36(4):75-78 Lu Hao. CMT welding technology of thick aluminum alloy plates for high speed train[J]. Transacations of the China Welding Institution, 2015, 36(4):75-78
    赵双双, 梁志敏, 汪殿龙, 等. 铝合金DC CMT与P-MIG混合过渡焊特征分析[J]. 焊接技术, 2015, 44(1):26-29 Zhao Shuangshuang, Liang Zhimin, Wang Dianlong, et al. Analysis of characteristics of mixed droplet-transfer between DC CMT welding and P-MIG welding in aluminium alloy[J]. Welding Technology, 2015, 44(1):26-29
    Sharma C, Dwivedi D K, Kumar P. Influence of in-process cooling on tensile behaviour of friction stir welded joints of AA7039[J]. Material Science & Engineering A, 2012(556):479-487.
    刘会杰, 张会杰, 于雷. 强冷介质作用下的铝合金搅拌摩擦焊焊接特征[J]. 焊接, 2010(7):8-11 Liu Huijie, Zhang Huijie, Yu Lei. Influence of intensive cooling medium on friction stir welding characteristics of aluminum alloys[J]. Welding & Joining, 2010(7):8-11, doi: 10.3969/j.issn.1002-025X.2010.07.003
    Wang Houqin, Zhang Binggang, Wang Ting, et al. Effect of forced cooling on weld appearance and microhardness of electron beam welded QCr0.8 alloy[J]. China Welding, 2015, 24(2):63-68.
    Yegaie Y S, Kermanpur A, Shamanian M. Numerical simulation and experimental investigation of temperature and residual stress in GTAW with a heat sink process of Monel 400 plates[J]. Journal of Materials Processing Technology, 2010, 210(13):1690-1701. doi: 10.1016/j.jmatprotec.2010.05.017
    Kou S. Welding Metallurgy[M]. New Jersey:John Wiley & Sons, Inc, 2003:160-166, 303.
    Gupta A K, Lioyd D J, Court S A. Precipitation hardening in Al-Mg-Si alloys with and without excess Si[J]. Materials Science and Engineering A, 2001(316):11-17.
    Myhr O R, Grong Ø, Fjær H G, et al. Modelling of the microstructure and strength evolution in Al-Mg-Si alloys during multistage thermal processing[J]. Acta Materialia, 2004(52):4997-5008.
    Dong P, Sun D Q, Li H M. Natural aging behaviour of friction stir welded 6005A-T6 aluminum alloy[J]. Materials Science & engineering A, 2013(576):29-35.

Catalog

    Article views (894) PDF downloads (184) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return