Advanced Search
WEN Quan, LI Wenya, WU Xuemeng, REN Shouwei, ZHAO Jing. Forming mechanism and processing of stationary upper shoulder BT-FSW[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(7): 88-96. DOI: 10.12073/j.hjxb.20211128002
Citation: WEN Quan, LI Wenya, WU Xuemeng, REN Shouwei, ZHAO Jing. Forming mechanism and processing of stationary upper shoulder BT-FSW[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(7): 88-96. DOI: 10.12073/j.hjxb.20211128002

Forming mechanism and processing of stationary upper shoulder BT-FSW

More Information
  • Received Date: November 27, 2021
  • Available Online: April 15, 2022
  • Taking the stationary upper shoulder bobbin tool friction stir welding (SSUBT-FSW) welded joint of AA6056 aluminum alloy as the research object, the distributions of temperature and strain fields have been clarified based on combining with experimental and numerical simulation methods. Results show that the upper shoulder of SSUBT-FSW is in a static state, which effectively increases the welding stability and decreases the maximum torque to 55 N·m (the maximum torque of conventional bobbin tool friction stir welding is 65 N·m). The pressure of the stationary upper shoulder on the weld surface reduces the height difference between the peak and trough of the arc corrugations from 60 μm to 10 μm, which significantly improves the surface finish of the joint. The diameter of plastic strain zone driven by the lower rotating shoulder is larger than that developed by the probe, promoting the plastic strain field shows a trapezoidal shape on the cross section of the joint, which is good agreement with the shape of the temperature field. In the SSUBT-FSW process, the material flow of the lower shoulder is significantly better than that of the stationary upper shoulder, and the material asymmetry flow characteristics are formed along the thickness direction of the joint.
  • 贺地求, 胡雷, 赵志峰, 等. 超声功率对2219-T351 铝合金搅拌摩擦焊接头组织与性能的影响[J]. 焊接学报, 2020, 41(3): 23 − 28.

    He Diqiu, Hu Lei, Zhao Zhifeng, et al. Effect of ultrasonic power on microstructure and properties of 2219-T351 aluminum alloy friction stir welding joint[J]. Transactions of the China Welding Institution, 2020, 41(3): 23 − 28.
    刘西畅, 李文亚, 高彦军, 等. 铝合金双轴肩搅拌摩擦焊过程材料流动行为[J]. 焊接学报, 2021, 42(3): 48 − 56. doi: 10.12073/j.hjxb.20201228002

    Liu Xichang, Li Wenya, Gao Yanjun, et al. Material flow behavior during bobbin-tool friction stir welding of aluminum alloy[J]. Transactions of the China Welding Institution, 2021, 42(3): 48 − 56. doi: 10.12073/j.hjxb.20201228002
    Wen Q, Li W Y, Patel V, et al. Investigation on the effects of welding speed on bobbin tool friction stir welding of 2219 aluminum alloy[J]. Metals and Materials International, 2020, 26: 1830 − 1840. doi: 10.1007/s12540-019-00450-9
    Dos Santos J F, Hilgert J. Apparatus for friction stir welding: US8893951 B2[P]. 2014.
    Scupin P J. Semi-stationary shoulder bobbin tool (S3BT): a new approach in high speed friction stir welding[D]. Hamburg: Technischen Universität Hamburg-Harburg, 2015.
    Goebel J, Reimann M, Norman A, et al. Semi-stationary shoulder bobbin tool friction stir welding of AA2198-T851[J]. Journal of Materials Processing Technology, 2017, 245: 37 − 45. doi: 10.1016/j.jmatprotec.2017.02.011
    Olea C A W, Roldo L, dos Santos J F, et al. A sub-structural analysis of friction stir welded joints in an AA6056 Al-alloy in T4 and T6 temper conditions[J]. Materials Science and Engineering: A, 2007, 454-455: 52 − 62. doi: 10.1016/j.msea.2006.12.055
    Johnson G R, Cook W H. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures[C]//7th International Symposium on Ballistics. The Hague, The Netherlands, 1983: 541 − 547.
    Chauhan P, Jain R, Pal S K, et al. Modeling of defects in friction stir welding using coupled eulerian and lagrangian method[J]. Journal of Manufacturing Processes, 2018, 34: 158 − 166. doi: 10.1016/j.jmapro.2018.05.022
    Li W Y, Wang F F. Modeling of continuous drive friction welding of mild steel[J]. Materials Science and Engineering:A, 2011, 528(18): 5921 − 5926. doi: 10.1016/j.msea.2011.04.001
    Schmidt H, Hattel J. A local model for the thermomechanical conditions in friction stir welding[J]. Modelling and Simulation in Materials Science and Engineering, 2005, 13(1): 77 − 93. doi: 10.1088/0965-0393/13/1/006
    Bastier A, Maitournam M H, Dang V K, et al. Steady state thermomechanical modelling of friction stir welding[J]. Science and Technology of Welding and Joining, 2013, 11(3): 278 − 288.
    邓永芳, 左敦稳, 宋波, 等. 铝合金FSW接头弧纹形成过程及主要影响因素分析[J]. 焊接学报, 2014, 35(7): 43 − 46.

    Deng Yongfang, Zuo Dunwen, Song Bo, et al. Analysis of formation process and main factors of arc lines in aluminum alloy friction stir welded joint[J]. Transactions of the China Welding Institution, 2014, 35(7): 43 − 46.
    郝云飞, 马建波, 毕煌圣, 等. 铝合金T形接头静止轴肩搅拌摩擦焊接及组织性能分析[J]. 焊接学报, 2019, 40(7): 48 − 54. doi: 10.12073/j.hjxb.2019400180

    Hao Yunfei, Ma Jianbo, Bi Huangsheng, et al. Analysis of microstructure and mechanical properties of the aluminum alloy T-joint welded by stationary shoulder friction stir welding[J]. Transactions of the China Welding Institution, 2019, 40(7): 48 − 54. doi: 10.12073/j.hjxb.2019400180
  • Related Articles

    [1]FU Juan, ZHAO Yong, ZOU Jiasheng, JIA Zhanjun, HE Yuxiang. Mechanism of the oxidation film tearing by DCEN-TIG helium welding of aluminum[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2021, 42(12): 87-90. DOI: 10.12073/j.hjxb.20201120001
    [2]ZHANG Min1,2, KONG Liang1,2, WANG Min1,2. Study of electrode tip morphology on the performance in resistance spot welding of AA5182 aluminum alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(4): 84-88. DOI: 10.12073/j.hjxb.2018390101
    [3]FENG Guangjie, LI Zhuoran, Xu Kai, LIU Wenbo. Interface microstructure and mechanism of SiC ceramic vacuum brazed joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(1): 13-16.
    [4]ZOU Jiasheng, WANG Tao, SHEN Qiao, CHEN Zheng. Investigation on life of coated electrode and traditional electrode for resistant spot welding of Zn-coated steels[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (11): 53-56.
    [5]XIA Yuan, SONG Yonglun, RAN Guowei, SHI Linan. Analysis on mechanism of laser-assisted TIG arc ignition[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (1): 9-11,16.
    [6]ZHANG Xuqiang, ZHANG Yansong, CHEN Guanlong. Effect of pitting on electrode life in spot welding hot galvanization steel with high strength[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (6): 13-16.
    [7]WANG Xue, GE Zao-xiang, CHEN Fang-yu, LI Chao-zhi. Fracture mechanism of 12Cr2WMoVTiB steel joint in low-temperature reheater tubes[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (9): 89-92,98.
    [8]WANG Lu, QIAN Jing-feng, WANG Min. Forecast of electrode life in spot welding of galvanized steel sheet[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (7): 109-112.
    [9]ZHOU Fang-ming, QIAN Yi-yu, ZHANG Jing, LI GUI-peng. Grain refinement mechanism of gas tungsten arc welded joint of tantalum thin walled tube[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (6): 41-44,48.
    [10]Zhang Xiuzhi, Niu Jitai, Huang JiLun, Wang Yinan. A STUDY OF THE MECHANISM OF ARC STABILITY OF AC COMPOSITE PLASMA ARC WELDING BY A SINGLE AC SOURCE[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1989, (1): 13-18.

Catalog

    Article views (475) PDF downloads (43) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return