Grain growth and phase transformation in the welded joint HAZ of TiNbV microalloyed steel

FU Kuijun; ZHAO Jingwei; GAO Mingze; LENG Xuesong; YAN Jiuchun

doi:10.12073/j.hjxb.20190715004

TRANSACTIONS OF THE CHINA WELDING INSTITUTION > 2020 > 41(3): 17-22. > DOI: 10.12073/j.hjxb.20190715004

FU Kuijun, ZHAO Jingwei, GAO Mingze, LENG Xuesong, YAN Jiuchun. Grain growth and phase transformation in the welded joint HAZ of TiNbV microalloyed steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(3): 17-22. DOI: 10.12073/j.hjxb.20190715004

Citation:

PDF (1663 KB)

Grain growth and phase transformation in the welded joint HAZ of TiNbV microalloyed steel

1.
State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin, 150001, China
2.
State Key Laboratory of Metal Materials for Marine Equipment and Application, Anshan,114009, China

More Information

Received Date: July 14, 2019
Available Online: July 12, 2020

Graphical Abstract

Abstract

Abstract

The grain growth and phase transformation in HAZ of TiNbV microalloyed steel under simulated welding thermal cycling were studied by in situ observation method using laser confocal microscope. The results show that the transformation from ferrite and pearlite to austenite is occurred while the heating temperature rises to 860 ~ 980 ℃ during thermal cycling. The austenite grain begins to grow obviously while the temperature reaches 1 100 ℃. At the temperature range of 1 300 ~ 1 400 ℃, the grain grows rapidly with the form of combining. During cooling process, when the temperature declines to 1 400 ~ 1 350 ℃, the grain grows slowly with the form of grain boundary migrating. When the temperature decreases to 660 ~ 580 ℃, the austenite transforms rapidly to bainite. The content of HAZ is mainly composed of bainite and ferrite. The size of austenite grain determines the maximum size of bainite. The formation, transformation and end temperature range of austenite and bainite decreases with the prolongation of the high temperature residence time. The content of proeutectoid ferrite decreases first and then increases, the content of bainite decreases, the polygonal ferrite disappears, and the cooling structure tends to be uniform and coarse. During the welding process, the choosing of appropriate high temperature residence time can increase the content of IAF in HAZ and improve the mechanical properties of the joints.
- TiNbV microalloyed steel,
- welding heat cycle,
- welding heat affected zone,
- grain growth,
- phase transformation

FullText(HTML)

References (14)

References

习小军, 赖朝彬, 吴春红, 等. 大线能量焊接船板钢的研究现状与发展[J]. 有色金属科学与工程, 2016, 7(5): 56 − 59.

Xi Xiaojun, Lai Chaobin, Wu Chunhong, et al. Research situation and development of ship plate steel by high heat input welding[J]. Nonferrous Metals Science and Engineering, 2016, 7(5): 56 − 59.

Hashiba Y, Sasaki K, Kasuya T, et al. Development of welding materials for high deat Input welding compatible with thick steel plates of 460 MPa yield point class for very large container ships[J]. Welding in the World, 2010, 54(1-2): R35 − R41. doi: 10.1007/BF03263482

李超, 董廷亮, 孔维明, 等. Ti-Ca复合脱氧大线能量焊接用钢中夹杂物的演变[J]. 钢铁, 2019, 54(2): 35 − 40.

Li Chao, Dong Tingliang, Kong Weiming, et al. Evolution of inclusions in high heat input welding steel with TiCa compound deoxygenation[J]. Steel, 2019, 54(2): 35 − 40.

李静, 王华, 曲圣昱, 等. 焊接热循环参数对大线能量焊接用钢EH40热影响区组织和性能的影响[J]. 北京科技大学学报, 2012, 34(7): 788 − 792.

Li Jing, Wang Hua, Qu Shengyu, et al. Effect of welding thermal cycle parameters on the microstructure and properties in the heat affected zone of steel EH40 for high heat input welding[J]. Journal of University of Science and Technology Beijing, 2012, 34(7): 788 − 792.

Zhang Lei, Kannengiesser T. Austenite grain growth and microstructure control in simulated heat affected zones of microalloyed HSLA steel[J]. Materials Science & Engineering A, 2014, 613: 326 − 335.

宋峰雨, 李艳梅, 王平, 等. 大热输入焊接接头组织性能研究[D]. 呼和浩特: 内蒙古工业大学学报, 2017, 36(1), 6-9.

Bonnevie E, Ferrière G, Ikhlef A, et al. Morphological aspects of martensite-austenite constituents in intercritical and coarse grain heat affected zones of structural steels[J]. Materials Science & Engineering A, 2004, 385(1-2): 352 − 358.

Yu Shengfu, Dai Yili, Yan Ning. Inclusion behavior and microstructure of weld metal with Ce in twin wire high heat input submerged-arc welding[J]. China Welding, 2017, 26(1): 29 − 36.

胡海江, 徐光, 张玉龙, 等. 先进贝氏体钢奥氏体晶粒长大行为的动态观察[J]. 材料热处理学报, 2014, 35(1): 83 − 87.

Hu Haijiang, Xu Guang, Zhang Yulong, et al. Dynamic observation of austenite grain growth behavior of an advanced bainite steel[J]. Journal of Material Heat Treatment, Journal of Material Heat Treatment, 2014, 35(1): 83 − 87.

Zhu Liguang, Wang Yan, Wang Shuoming, et al. Research of microalloy elements to induce intragranular acicular ferrite in shipbuilding steel[J]. Ironmaking & Steelmaking, 2017: 1 − 9.

刘岩, 王凯, 王建明, 等. 大线能量焊接条件下低合金高强度钢针状铁素体形核影响因素及形核机理研究[J]. 材料导报, 2016, 30(13): 102 − 105.

Liu Yan, Wang Kai, Wang Jianming, et al. Acicular ferrite nucleation in high strength low alloy steel during high heat input welding: influences and mechanism[J]. Material Guide, 2016, 30(13): 102 − 105.

Yang Jian, Xu Long, Zhu Kai, et al. Improvement of HAZ toughness of steel plate for high heat input welding by inclusion control with Mg deoxidation[J]. Steel Research International, 2015, 86(6): 619 − 625. doi: 10.1002/srin.201400313

高丽娜, 张彩军, 顾克井, 等. 高强度船板钢中针状铁素体的原位观察[J]. 钢铁钒钛, 2017, 38(1): 143 − 146. doi: 10.7513/j.issn.1004-7638.2017.01.025

Gao Lina, Zhang Caijun, Gu Kejing, et al. Insitu observation of acicular ferrite in high strength ship-building plate steel[J]. Iron Steel Vanadium Titanium, 2017, 38(1): 143 − 146. doi: 10.7513/j.issn.1004-7638.2017.01.025

付魁军, 高铭泽, 冷雪松, 等. TiNb钢焊接热影响区微观组织与冲击性能演变规律[J]. 焊接学报, 2019, 40(5): 42 − 47. doi: 10.12073/j.hjxb.2019400125

Fu Kuijun, Gao Mingze, Leng Xuesong, et al. Evolution of microstructure and impact property in welding HAZ of TiNb steel[J]. Transactions of the China Welding Institution, 2019, 40(5): 42 − 47. doi: 10.12073/j.hjxb.2019400125

[1]	YI Rongtao, ZHAO Dawei, WANG Yuanxun. Numerical simulation of resistance spot welding considering phase transition effect[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (10): 71-74.
[2]	BAO Li, LONG Weimin, PEI Yinyin, MA Jia. Thermal kinetics for phase transformation of CuZnSnSi alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (10): 55-58.
[3]	ZHENG Huaibei, YE Xiaoning, ZHANG Xuefeng, JIANG Laizhu, LIU Zhenyu, WANG Guodong. Microstructure transformation,grain growth and precipitated phase of 12%Cr ferritic stainless steel in coarse grain zone[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (6): 37-40.
[4]	YANG Guangchen, ZHANG Yanhua. Effect of high-temperature phase transition of low carbon steel on weld angular distortion[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (8): 65-67.
[5]	LIU Xin, GONG Shuili, LEI Yongping. Thermodynamic character of phase transformation of TC4 titanium alloy electron beam welded joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (2): 57-59,98.
[6]	ZHANG Genyuan, XU Maili, TIAN Songya, Wen Fang. Genetic algorithm of grain growth in heat-affected zone of 45 steel AC flash butt welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (6): 79-82.
[7]	QIN Bin, SHENG Guang-min, HUANG Jia-wei, LI Cong. Phase transformation diffusion bonding technology for titanium alloy to stainless steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (1): 41-44,48.
[8]	WEN Jun qin, LIU Xin tian, MO Chun li, ZHANG Shi xing. Microstructure simulation of grain growth in heat affected zone[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2003, (3): 48-51.
[9]	Long Xin, Xu Yonggang, Cai Guangjun. Study on the Continuous Cooling Transformation of Modified 9%Cr-1%Mo Weld Metals[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2000, (1): 53-56.
[10]	Wang Yucheng, Yu Jie, Li Yan, Li Weidong, Wang Jianguang. Martensitic Transformation and Microstructure in Fusion Zone of Dissimilar Steel Welded Joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1999, (3): 147-152.

Cited By

Cited by

Periodical cited type(1)

李力，王一轩，罗芬，张文涛，赵巍，李小强. 钎焊时间对TiH_2-65Ni+TiB_2钎料钎焊连接TiAl合金接头的影响. 机械工程学报. 2024(08): 176-185 .

Other cited types(1)

Get Citation

PDF

XML

Article views (496) PDF downloads (17) Cited by(2)

Turn off MathJax

Article Contents

Abstract

References

Grain growth and phase transformation in the welded joint HAZ of TiNbV microalloyed steel