Advanced Search
LV Xiaoqing, WANG Xu, XU Lianyong, JING Hongyang, HAN Yongdian. Multi-objective optimization of MAG process parameters based on ensemble models[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(2): 6-11. DOI: 10.12073/j.hjxb.20190629001
Citation: LV Xiaoqing, WANG Xu, XU Lianyong, JING Hongyang, HAN Yongdian. Multi-objective optimization of MAG process parameters based on ensemble models[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(2): 6-11. DOI: 10.12073/j.hjxb.20190629001

Multi-objective optimization of MAG process parameters based on ensemble models

More Information
  • Received Date: June 28, 2019
  • Available Online: July 12, 2020
  • Three-factor and three-level full factor bead-on plate and butting welding tests were carried out with welding voltage, welding speed and wire feed rate being taken as considerable process parameters. Based on the data of the tests, error back propagation neural network, radial basis function neural network and kriging model were established to predict weld reinforcement, the tensile strength and impact energy of the weld generated in the tests. The results of model prediction show that the models can predict the weld performance well, but there are no models that can predict the three kinds of weld performance at the same time, and the prediction of each model fluctuates greatly. In order to further improve the precision and stability of prediction, the three stand-alone models mentioned above were combined into ensemble models in the manner of linear weighting method. Then, the multi-objective optimization of process parameters was achieved by NSGA-II based on the ensemble models. Finally, the non-inferior solutions between the weld reinforcement, the tensile strength and impact energy of the joints are obtained and verified. It is of great significance to realize the overall optimization of weld comprehensive performance and the fine application of welding.
  • 范成磊, 姚庆泰, 谢伟峰, 等. 超声-MAG复合焊接的熔滴过渡行为[J]. 焊接学报, 2017, 38(11): 11 − 15. doi: 10.12073/j.hjxb.20151214004

    Fan Chenglei, Yao Qingtai, Xie Weifeng, et al. Characteristics of droplet transfer during ultrasound-MAG hybrid welding[J]. Transactions of the China Welding Institution, 2017, 38(11): 11 − 15. doi: 10.12073/j.hjxb.20151214004
    Kamble A G, Rao R V. Experimental investigation on the effects of process parameters of GMAW and transient thermal analysis of AISI321 steel[J]. Advances in Manufacturing, 2013, 1(4): 362 − 377. doi: 10.1007/s40436-013-0041-2
    Eusebio J M, Jose A E, Valentin M, et al. Optimization of geometric parameters in a welded joint through response surface methodology[J]. Construction and Building Materials, 2017, 154: 105 − 114. doi: 10.1016/j.conbuildmat.2017.07.163
    Choudhary A, Kumar M, Unune D R. Parametric modeling and optimization of novel water-cooled advanced submerged arc welding process[J]. The International Journal of Advanced Manufacturing Technology, 2018, 97: 927 − 938. doi: 10.1007/s00170-018-1944-7
    赵大伟, 康与云, 易荣涛, 等. 基于试验设计与统计分析的双相钢激光焊工艺优化[J]. 焊接学报, 2018, 39(1): 65 − 69. doi: 10.12073/j.hjxb.2018390015

    Zhao Dawei, Kang Yuyun, Yi Rongtao, et al. Research on process parameters optimization of laser welding for dual phase steel DP600[J]. Transactions of the China Welding Institution, 2018, 39(1): 65 − 69. doi: 10.12073/j.hjxb.2018390015
    杨亚超, 全惠敏, 邓林峰, 等. 基于神经网络的焊机参数预测方法[J]. 焊接学报, 2018, 39(1): 32 − 36. doi: 10.12073/j.hjxb.2018390008

    Yang Yachao, Quan Huimin, Deng Linfeng, et al. Prediction method of welding machine parameters based on neural network[J]. Transactions of the China Welding Institution, 2018, 39(1): 32 − 36. doi: 10.12073/j.hjxb.2018390008
    Vimal K E K, Vinodh S, Raja A. Optimization of process parameters of SMAW process using NN-FGRA from the sustainability view point[J]. Journal of Intelligent Manufacturing, 2017, 28(6): 1459 − 1480. doi: 10.1007/s10845-015-1061-5
    Palanivel R, Dinaharan I, Laubscher R F. Application of an artificial neural network model to predict the ultimate tensile strength of friction-welded titanium tubes[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2019, 41: 111. doi: 10.1007/s40430-019-1613-2
    Ahmed A N, Noor C W M, Allawi M F, et al. RBFNN-based model for prediction of weld bead geometry in shielded metal arc welding (SMAW)[J]. Neural Computing and Applications, 2018, 29(3): 889 − 899. doi: 10.1007/s00521-016-2496-0
    Bayo E, Gracia J. Stiffness modelling of 2D welded joints using metamodels based on mode shapes[J]. Journal of Constructional Steel Research, 2019, 156: 242 − 251. doi: 10.1016/j.jcsr.2019.02.017
  • Cited by

    Periodical cited type(4)

    1. 高宝祺,赵衍华,张丽娜,邵震,管卫,黄一鸣,崔雷. 2219铝合金拉拔式摩擦塞补焊成形行为及其对界面结合质量的影响. 焊接学报. 2025(02): 7-17+71 . 本站查看
    2. 张忠科,初树晟. H62黄铜摩擦塞补焊接头微观组织及力学性能. 材料科学与工艺. 2024(06): 41-49 .
    3. 马领航,李波,赵彦广,宋建岭,高世康,李雨,许子彦,周利. 火箭贮箱焊接缺陷修复技术研究现状. 电焊机. 2023(03): 31-45 .
    4. 张亮亮,刘致远,剡晓旭. 6082铝合金FSW匙孔修复过程中温度场数值模拟. 甘肃高师学报. 2023(05): 1-5 .

    Other cited types(1)

Catalog

    Article views (439) PDF downloads (45) Cited by(5)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return