Advanced Search
SUN Yang, LIU Yaliang, LI He, YANG Xinhua, XU Hongji. Rapid fatigue strength assessment of SUS301L-Q235B dissimilar materials spot-welded joint based on infrared thermography[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(1): 61-66. DOI: 10.12073/j.hjxb.20190304001
Citation: SUN Yang, LIU Yaliang, LI He, YANG Xinhua, XU Hongji. Rapid fatigue strength assessment of SUS301L-Q235B dissimilar materials spot-welded joint based on infrared thermography[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(1): 61-66. DOI: 10.12073/j.hjxb.20190304001
shu

Rapid fatigue strength assessment of SUS301L-Q235B dissimilar materials spot-welded joint based on infrared thermography

  • 1.

    Dalian Jiaotong University, Dalian, 116028, China

  • 2.

    Liaoning Key Laboratory of Welding and Reliability of Rail Transportation Equipment, Dalian, 116028, China

More Information
  • Received Date: March 03, 2019
  • Available Online: July 12, 2020
    Graphical Abstract
    • Abstract
  • In this paper, with the help of high performance infrared thermal imager, local hot spots of nugget and plastic ring on the side of SUS301L stainless steel of the SUS301L-Q235B dissimilar materials spot-welded joint was monitored. And the quantitative relationship between the temperature rise slope and the fatigue limit of the welding joint of dissimilar materials was established. Then, a method to predict the fatigue limit of the spot-welded joint of dissimilar materials based on the tipping point of temperature rise. The results show that a serious nugget migration generates on the Q235B side of SUS301L-Q235B dissimilar materials spot-welded joint, which results in reduction of the carrying capacity of stainless steel. Under the action of high frequency shear tensile, the "four stages" temperature evolution characteristics are presented. The fatigue limit predicted by infrared thermography was 5.569 kN. The fatigue limit obtained by the traditional staircase method was 5.875 kN. The error between the predicted value and the test value was 5.21%, which presents a high concordance. The rapid fatigue limit prediction proposed in this paper can overcome the limitations of the traditional fatigue test method and realize non-contact and non-destructive prediction of spot-welded joint fatigue limit of dissimilar materials, which has important engineering significance and research value.
    • FullText(HTML)
    • References (12)
  • 朱国仁, 陈松, 李蒙蒙. SUS301L不锈钢非熔透型激光搭接焊缝的疲劳特性分析[J]. 焊接学报, 2016, 37(4): 14 − 19.

    Zhu Guoren, Chen Song, Li Mengmeng. Study on fatigue performance of stainless steel non-penetration laser lap welding of SUS301L stainless body[J]. Transactions of the China Welding Institution, 2016, 37(4): 14 − 19.
    王希靖, 邓向槟, 王磊. Q235钢板与6082铝合金搅拌摩擦焊工艺[J]. 焊接学报, 2016, 37(1): 99 − 103.

    Wang Xijing, Deng Xiangbin, Wang Lei. Parametric study on friction stir welding of Q235 steel with 6082 aluminum alloy[J]. Transactions of the China Welding Institution, 2016, 37(1): 99 − 103.
    Liu Y L, Zou L, Sun Y B, et al. Evaluation model of aluminum alloy welded joint low-cycle fatigue data based on information entropy[J]. Entropy, 2017, 19(1): 1 − 14. doi: 10.3390/e19010037
    刘亚良, 孙屹博, 邹丽, 等. 基于信息熵的铝合金焊接接头疲劳寿命分析方法[J]. 焊接学报, 2018, 39(4): 67 − 72.

    Liu Yaliang, Sun Yibo, Zou Li, et al. Fatigue life analysis method of aluminum alloy welded joints based on information entropy[J]. Transactions of the China Welding Institution, 2018, 39(4): 67 − 72.
    封硕. 基于热力学分析的疲劳损伤与寿命预测研究[D]. 西安: 西北工业大学, 2015.
    Rosa G L, Risitano A. Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components[J]. International journal of Fatigue, 2000, 22(1): 65 − 73. doi: 10.1016/S0142-1123(99)00088-2
    Luong M P. Fatigue limit evaluation of metals using an infrared thermographic technique[J]. Mechanics of Materials, 1998, 28(1-4): 155 − 163. doi: 10.1016/S0167-6636(97)00047-1
    Crupi V, Guglielmino E, Maestro M, et al. Fatigue analysis of butt welded AH36 steel joints: thermographic method and design S-N curve[J]. Marine Structures, 2009, 22(3): 373 − 386. doi: 10.1016/j.marstruc.2009.03.001
    Zhang H X, Wu G H, Yan Z F, et al. An experimental analysis of fatigue behavior of AZ31B magnesium alloy welded joint based on infrared thermography[J]. Materials and Design, 2014, 55: 785 − 791. doi: 10.1016/j.matdes.2013.10.036
    Peyroux R, Chrysochoos A, Licht C, et al. Thermomechanical couplings and pseudoelasticity of shape memory alloys[J]. International Journal of Engineering Science, 1998, 36(4): 489 − 509. doi: 10.1016/S0020-7225(97)00052-9
    Wagner D, Ranc N, Bathias C, et al. Fatigue crack initiation detection by an infrared thermography method[J]. Fatigue & Fracture of Engineering Materials & Structures, 2010, 33(1): 12 − 21.
    Yang H W, Cui Z Q, Wang W X, et al. Fatigue behavior of AZ31B magnesium alloy electron beam welded joint based on infrared thermography[J]. Transactions of Nonferrous Metals Society of China, 2016, 26(10): 2595 − 2602. doi: 10.1016/S1003-6326(16)64385-6
    • Related Articles

  • Related Articles

    [1]SHEN Jinfei, ZHAO Hui, YANG Lei. Soft-switch DC chopper four fold-frequency power control 300 KHz/50 kW induction welding power[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (11): 89-92.
    [2]CHEN Yanming, CHEN Huihua, ZHANG Cheng, XUE Jiaxiang, HUANG Shisheng. Full-bridge soft-switching arc welding inverter based on peak current control[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (5): 5-8.
    [3]LI Yuanbo, HUANG Shish-eng. Soft-switching inverting high-speed double wire pulsed welding equipment based on DSP[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (5): 1-4.
    [4]ZHANG Taifeng, ZHOU Xiangquan, GUO Bingnan. Soft switching control of high frequency induction welding power supply with PWM and PFM[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (8): 65-68.
    [5]HUANG Shisheng, JIANG Xiaoming, XUE Jiaxiang, LI Yuanbo, WANG Zhenin. High-speed soft-switching twin-wire pulsed MAGwelding equipment[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (3): 5-8.
    [6]DU Xian chang, BAI Zhi fan, DENG Zhan feng, SUN Wei wei, ZHANG Yi. Resonant soft-switching inverter arc welding power source[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2003, (3): 52-55.
    [7]CHEN Shu-jun, LU Zhen-yang, HUANG Pengfei, YIN Shu-yan, PU Chun-hua. The Double Zero Soft Switching Arc Welding Power Source[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2002, (3): 1-5.
    [8]ZHANG Guang-xian, ZOU Zeng-da, YIN Hai, LI Si-hai. The Design of Main Loop for Soft-Switching Inverter Arc Welding Power Source[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2002, (1): 14-18.
    [9]Cao Biao, Chen Yanming, Huang Shisheng, Zhang Xiaohui, Wang Zhiqiang. A Novel Soft-switching Welding Inverter[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1998, (2): 46-50.
    [10]Zhu Xianlong, Yan Yangguang, Zhu Hongqian. IGBT Welding Inverter With Voltage Soft-switch and Measuring Current by Magnetic-loop[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1996, (2): 111-115.

Catalog

    Get Citation
    PDF
    XML
    Article views (273) PDF downloads (12) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return