Advanced Search
XUE Jiaxiang, LIN Fanglue, JIN Li, HU Yu. Influence of pulse current waveform on mechanical properties of Tandem double wire MIG welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(12): 6-10. DOI: 10.12073/j.hjxb.2019400305
Citation: XUE Jiaxiang, LIN Fanglue, JIN Li, HU Yu. Influence of pulse current waveform on mechanical properties of Tandem double wire MIG welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(12): 6-10. DOI: 10.12073/j.hjxb.2019400305
shu

Influence of pulse current waveform on mechanical properties of Tandem double wire MIG welding

  • 1.

    South China University of Technology, Guangzhou 510641, China

  • 2.

    Guizhou Minzu University, Guiyang 550025, China

More Information
  • Received Date: July 06, 2019
    Graphical Abstract
    • Abstract
  • As an efficient welding method for stainless steel, double wire pulse MIG welding is one of the hot spots in welding industry. However, how to select and adjust the current waveform parameters of double wire MIG welding is still a difficulty. In order to optimize the welding method of stainless steel and improve the welding efficiency, duplex stainless steel was used as the welding workpiece. The welding quality of duplex stainless steel was studied by comparing the parameters of current waveform through the research on the double wire trapezoidal wave double pulse welding, double wire rectangular wave double pulse welding and double wire single pulse welding. The results showed that under the condition of the same line energy, the double-wire trapezoidal wave double pulse welding had better stability than the double-wire rectangular wave double-pulse welding and the double-wire single-pulse welding, and the welding quality of the former was higher, and it could be seen more fish scales, while significantly increasing the tensile strength, hardness and toughness of stainless steel joints.
    • FullText(HTML)
    • References (11)
  • Cui S W, Shi Y H, Sun K, et al. Microstructure evolution and mechanical properties of keyhole deep penetration TIG welds of S32101 duplex stainless steel[J]. Materials Science Engineering, 2018, 709:214-222.
    Yao P, Zhou K, Zhu Q. Quantitative evaluation method of arc sound spectrum based on sample entropy[J]. Mechanical Systems and Signal Processing, 2017, 92:379-390.
    牛 永, 薛海涛, 李 桓, 等. 脉冲电压峰值对双丝脉冲 MIG焊熔滴过渡及焊缝成形的影响[J]. 焊接学报, 2010, 31(1):50-54
    Niu Yong, Xue Haitao, Li Huan, et al. Influence of pulse voltage peak on double-filament pulse MIG welding droplet transfer and weld formation[J]. Transactions of the China Welding Institution, 2010, 31(1):50-54
    文元美, 黄石生, 吴开源, 等. 脉冲双丝 MAG 焊接电流相位关系对成形的影响[J]. 焊接学报, 2010, 31(9):17-20
    Wen Yuanmei, Huang Shisheng, Wu Kaiyuan, et al. The influence of phase relationship of pulsed double wire MAG welding current on forming[J]. Transactions of the China Welding Institution, 2010, 31(9):17-20
    姚 屏, 薛家祥, 朱 强, 等. 基于概率密度分布图的双丝脉冲焊稳定性定量评价[J]. 焊接学报, 2014, 35(7):51-54
    Yao Ping, Xue Jiaxiang, Zhu Qiang, et al. Quantitative evaluation of double wire pulsed welding stability based on probability density distribution[J]. Transactions of the China Welding Institution, 2014, 35(7):51-54
    吴开源, 何祖伟, 梁焯永, 等. 双丝脉冲 MIG 焊的双脉冲焊接方法[J]. 焊接学报, 2017, 38(5):53-57
    Wu Kaiyuan, He Zuwei, Liang Chaoyong, et al. Double-pulse welding method for MIG welding[J]. Transactions of the China Welding Institution, 2017, 38(5):53-57
    Wang L L, Heng G C, Chen H, et al. Methods and results regarding sinusoid modulated pulse gas metal arc welding[J]. Scripta Materialia, 2016, 86:1841-1851.
    Mathivanan A, Devakumaran K, Senthil Kumar A. Comparative study on mechanical and metallurgical properties of AA6061 aluminum alloy sheet weld by pulsed current and dual pulse gas metal arc welding processes[J]. Materials and Manufacturing Processes, 2014, 29(8):941-947.
    Emami S, Saeid T, Khosroshahi R A. Microstructural evolution of friction stir welded SAF 2205duplex stainless steel[J]. Journal of Alloys and Compounds, 2018, 739:678-689.
    Shi Y H, Cui S W, Zhu T, et al. Microstructure and intergranular corrosion behavior of HAZ in DP-TIG welded DSS joints[J]. Journal of Materials Processing Technology, 2018, 256:254-261.
    Du C C, Wang X, Hu L. Microstructure, mechanical properties and residual stress of a 2205DSS/Q235 rapidly formed LBW joint[J]. Journal of Materials Processing Technology, 2018, 256:78-86.
    • Related Articles

  • Related Articles

    [1]FENG Jian<sup>1</sup>, HAN Jing<sup>1</sup>, ZHANG Xuemei<sup>2</sup>, DAI Guangze<sup>1</sup>, HAN Yuejiao<sup>3</sup>. Continuous drive friction welding and post welding heat treatment of 7A04 aluminum alloy and 304 stainless steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(8): 11-17. DOI: 10.12073/j.hjxb.2018390192
    [2]JI Zhaohui, SUN Zhen, DING Kunying, WANG Zhiping. Analysis of bonding properties between WC-17Co coating and titanium alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2017, 38(2): 5-9.
    [3]CHEN Zhongyi, MA Yonglin, WANG Wenjun, XING Shuqing, LU Hengchang. Finite element analysis on post-weld heat treatment of heavy-section SA508-3 steel plate for nuclear pressure vessel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(2): 80-84.
    [4]DENG Caiyan, LEI Zhenyu, GONG Baoming, WANG Dongpo. Effect of post weld heat treatment on integrity of complex structure[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(9): 5-8,34.
    [5]ZHANG Jing, CHANG Yongqin, HE Jianchao, WAN Farong. Friction stir welding of oxide dispersion strengthened material[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(7): 63-66.
    [6]YE Huan, XUE Songbai, LONG Weimin, ZHANG Qingke, MA Jia. Effect of oxidation on whisker growth in RE-containing lead-free solder[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (5): 59-61,66.
    [7]WEN Zhigang, JIN Weiliang, ZHANG Jianli, DENG Caiyan. Influence of post weld heat treatment on fracture toughness of DH36 steel welded joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (3): 89-92.
    [8]WANG Hui, LIU Xincai, PAN Jing, MA Yongcun. High-temperature oxidation behavior of cerium on the surface of Sn-Zn lead-free solders[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (12): 65-69.
    [9]LU Shanping, LI Dongjie, LI Dianzhong, LI Yiyi. Double shielded TIG welding method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (2): 21-24.
    [10]ZHOU Jian, FU Xiaoqing, SUN Yangshan, DING Kejian. Microstructure and properties of Sn-Zn-Bi-(P,Nd) lead-free solders[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (9): 45-48.

  • Cited by

    Periodical cited type(2)

    1. 王永东，王金宇，常萌阳. Y_2O_3对原位自生TiC-TiB_2增强镍基复合涂层组织与性能的影响. 黑龙江科技大学学报. 2024(02): 230-236 .
    2. 张宇鹏，王永东，徐刚，宫书林，汤明日，王磊. 石墨烯对激光熔覆Ti-C-Nb增强Ni基涂层组织与性能的影响. 激光与光电子学进展. 2022(01): 208-216 .

    Other cited types(1)

Catalog

    Get Citation
    PDF
    XML
    Article views (423) PDF downloads (74) Cited by(3)
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return