Advanced Search

column
Development of self-shielded flux cored wire for X100 pipeline steel and performance analysis of welded joints
ZHANG Min, LIU Mingzhi, CHEN Yangyang, LI Jihong
2014, 35(10): 1-4.
[Abstract] [PDF]
Effects of longitudinal magnetic field on non-consumable gas shielded arc welding
CHEN Shujun, MENG Danyang, SU Zaiwei, JIANG Fan, LU Yongsheng
2014, 35(10): 5-8.
[Abstract] [PDF]
Effect of bonding temperature on interfacial microstructure and properties of TiAl/Ti_3AlC_2 joint
SONG Xiaoguo, WANG Meirong, LIN Xingtao, LIU Jiakun, CAO Jian, FENG Jicai
2014, 35(10): 9-12.
[Abstract] [PDF]
Study on phase matching control system for pulsed laser-arc hybrid welding based on Labview
SONG Gang, LIU Che, SONG Qiuping, LIU Liming
2014, 35(10): 13-16.
[Abstract] [PDF]
Numerical analysis of three-wire tandem submerged arc welding grade X80 pipeline steel
ZHAO Ming, WANG Haiyan, WAN Fuwei, LUO Detong
2014, 35(10): 17-20.
[Abstract] [PDF]
Research on rapid underwater welding based on SHS
YIN Yujun, PAN Chuanzeng, SU Shan
2014, 35(10): 21-24.
[Abstract] [PDF]
Microstructure and mechanical properties of variable polarity plasma arc keyhole weld of 2A12 aluminum alloy
JIANG Yi, LIU Ming, LU Yaohui, XU Binshi
2014, 35(10): 25-28.
[Abstract] [PDF]
Influence of welding residual stresses on fatigue life of Al2024 plate
ZHANG Zhengwei, ZHANG Zhao, ZHANG Hongwu
2014, 35(10): 29-32,36.
[Abstract] [PDF]
Preparation and connectivity of sintering paste containing copper particles covered by nano-silver
CAO Yang, LIU Ping, WEI Hongmei, LIN Tiesong, HE Peng, GU Xiaolong
2014, 35(10): 33-36.
[Abstract] [PDF]
Effect of pulse frequency on microstructure and properties of Ti-6Al-4V joints under condition of low duty cycle
YANG Zhou, QI Bojin, CONG Baoqiang, YANG Mingxuan, GAO Mingjian
2014, 35(10): 37-40.
[Abstract] [PDF]
Arc morphology and weld pool flowing in A-MAG welding process
LU Hao, XING Jingwei, XING Liwei, LIANG Zhimin
2014, 35(10): 41-44.
[Abstract] [PDF]
Welding characteristics of aluminum alloy with pre-melting liquid filler
PENG Jin, LI Liqun, LIN Shangyang, DENG Zhou
2014, 35(10): 45-48.
[Abstract] [PDF]
Effect of slagging flux on Fe-Al intermetallic coatings synthesized by laser cladding
Jing, ZOU Yong, JIA Shengkai, YU Lei
2014, 35(10): 49-52.
[Abstract] [PDF]
Coupling behavior of plasmas during laser-arc hybrid welding process
CHEN Minghua, LI Chenbin, LIU Liming
2014, 35(10): 53-56.
[Abstract] [PDF]
Microstructure and wear resistance of laser amorphousnanocrystals reinforced Ni-based coating on TA15 titanium alloy
LI Jianing, GONG Shuili, LI Huaixue, SHAN Feihu
2014, 35(10): 57-60.
[Abstract] [PDF]
Weld defect detection by X-ray images method based on Fourier fitting surface
LI Xueqin, LIU Peiyong, YIN Guofu, JIANG Honghai
2014, 35(10): 61-64.
[Abstract] [PDF]
Effects of laser scanning welding process on porosity rate of aluminum alloy
ZHOU Litao, WANG Wei, WANG Xuyou, WANG Shiyang
2014, 35(10): 65-68,72.
[Abstract] [PDF]
Corrosion behavior of weld joints of substation grounding grid
FENG Lajun, DENG Bo, YAN Aijun, ZHANG Jing
2014, 35(10): 69-72.
[Abstract] [PDF]
Research on toughness weak points of joints of NiCrMoV refractory steel for manufacturing steam turbine rotor
LI Yifei, CAI Zhipeng, PAN Jiluan, LIU Xia, WANG Peng, HUO Xin, SHEN Hongwei
2014, 35(10): 73-76,80.
[Abstract] [PDF]
Chemical reaction of ceramic coatings of Ti-Si-C system on Ti-5Al-2.5Sn substrate prepared by tungsten inert-gas arc cladding
YAN Wenqing, GUI Chibin, DAI Le
2014, 35(10): 77-80.
[Abstract] [PDF]
Research on scanning path based on metal powder electron beam rapid prototyping
CHEN Yunxia, WANG Xiaojing, CHEN Shanben, YAO Shun
2014, 35(10): 81-84.
[Abstract] [PDF]
Microstructure of single track fiber laser cladding with wire feeding by side
LI Kaibin, LI Dong, LIU Dongyu, YU Zhishui
2014, 35(10): 85-88.
[Abstract] [PDF]
Numerical simulation and test verification of welding temperature field of 12Cr1MoV heat-resistant steel pipe
CHI Luxin, SUN Zhaofan, WU Guangfeng
2014, 35(10): 89-92.
[Abstract] [PDF]
Determination of shape parameters of double ellipsoid heat source model in numerical simulation based on SYSWELD software
LI Ruiying, ZHAO Ming, WU Chunmei
2014, 35(10): 93-96.
[Abstract] [PDF]
Quantitative analysis of solder powder particle based on morphology
LU Lin, SUN Jia, WANG Hongmei, WANG Liqiang
2014, 35(10): 97-100.
[Abstract] [PDF]
Analysis on welding porosity of iron powder electrode
YIN Shike, WU Shuxiong, WANG Yong, WANG Yishan
2014, 35(10): 101-104.
[Abstract] [PDF]
Weldability of Al-13.0Si-0.7Mg Alloy on T6 state
TENG Yingxue, ZHANG Yuqi, GUO Jing, YANG Chunli
2014, 35(10): 105-108.
[Abstract] [PDF]
Welding thermal simulation of bainite steel used for rail way frog
WANG Qiuying, CHEN Hui, HU Zhibo, JIANG Chao, LI Da
2014, 35(10): 109-112.
[Abstract] [PDF]