| [1] |
刘会杰. 焊接冶金与焊接性[M]. 北京: 机械工业出版社, 2007.[2] 王国庆，赵衍华. 铝合金的搅拌摩擦焊接 [M]. 北京: 中国宇航出版社, 2010.[3] 张成聪, 常保华, 陶 军, 等. 2024铝合金搅拌摩擦焊过程组织演化分析[J]. 焊接学报, 2013, 34(3): 57-60.Zhang Chengcong, Chang Baohua, Tao Jun,et al. Microstructure evolution during friction stir welding of 2024 aluminum alloy[J]. Transactions of the China Welding Institution, 2013, 34(3): 57-60.[4] 周明智, 雷党刚, 梁 宁， 等. 搅拌摩擦焊三维粘塑性热力耦合有限元数值模拟[J]. 焊接学报, 2010, 31(2): 5-9.Zhou Mingzhi, Lei Danggang, Liang Ning,et al. 3D coupled thermo-mechanical visco-plastic finite element simulation of friction stir welding process[J]. Transactions of the China Welding Institution, 2010, 31(2): 5-9.[5] Zhang Peng, Guo Ning, Chen Gang,et al. Plastic deformation behavior of the friction stir welded AA2024 aluminum alloy[J]. Int J Adv Manuf Technol, 2014(29): 1-7.[6] 严 铿, 刘 俊, 史 超. 喷射成形7055铝合金FSW焊工艺与性能[J]. 焊接学报, 2012, 33(6): 51-54.Yan Keng, Liu Jun, Shi Chao. Study on process and property of FSW of spray formed 7055 aluminum alloy[J]. Transactions of the China Welding Institution, 2012, 33(6): 51-54.[7] 李继忠, 孙占国, 高 崇, 等. 根部未焊透对搅拌摩擦焊接接头力学性能的影响[J]. 电焊机, 2014, 44(4): 18-22.Li Jizhong, Sun Zhanguo, Gao Chong,et al. Influence the lack of penetration on the mechanical properties of friction stir welded joints[J]. Electric Welding Machine, 2014, 44(4): 18-22.[8] 崔少朋, 朱 浩, 郭 柱, 等. 7075铝合金搅拌摩擦焊接头变形及失效行为[J]. 焊接学报, 2016, 37(6): 27-30.Cui Shaopeng, Zhu Hao, Guo Zhu,et al. Deformation and failure behavior of friction stir weld joint of 7075 aluminum alloy[J]. Transactions of the China Welding Institution, 2016, 37(6): 27-30.[9] Lee K, Kwon E. Microstructure of stir zone in dissimilar friction stir welds of AA6061-T6 and AZ31 alloy sheets[J]. Transactions of Nonferrous Metals Society of China, 2014(24): 2374-2379.[10] Srinivasa R T, Madhusudhan R G, Koteswara S R. Microstructure and mechanical properties of friction stir welded AA7075-T651 aluminum alloy thick plates[J]. Transactions of Nonferrous Metals Society of China, 2015(25): 1770-1778.[11] Bayazid M S, Farhangi H, Asgharzadeh H,et al. Effect of cyclic solution treatment on microstructure and mechanical properties of friction stir welded 7075 Al alloy[J]. Materials Science & Engineering A, 2016(649): 293-300.[12] 朱 浩, 郭 柱, 崔少朋, 等. 焊缝强度匹配对铝合金焊接接头三向应力度分布的影响[J]. 焊接学报, 2014, 35(11): 84-88.Zhu Hao, Guo Zhu, Cui Shaopeng,et al. Influence of weld strength match on distribution of stress triaxiality for aluminum alloy welded joint[J]. Transactions of the China Welding Institution, 2014, 35(11): 84-88.[13] 董继红, 董春林, 孟 强, 等. 铝合金浮动式双轴肩FSW接头组织性能分析[J]. 焊接学报, 2013, 34(10): 43-46.Dong Jihong, Dong Chunlin, Meng Qiang,et al. Microstructure and mechanical properties of floating bobbin friction stir welded joints in aluminum alloy[J]. Transactions of the China Welding Institution, 2013, 34(10): 43-46.
|
百度学术
下载:
