[1] |
Radhakrishnan R, Williams J J, Akinc M. Synthesis and high-temperature stability of Ti3SiC2[J]. Journal of Alloys and Compounds, 1999, 285(1): 85-88.[2] 闫文青, 张建强, 刘 升. 氩弧熔覆Ti-Si-C系陶瓷涂层中物相的热力学预测[J]. 焊接学报, 2017, 38(5): 108-111.Yan Wenqing, Zhang Jianqiang, Liu Sheng. Thermodynamic prediction for phases of ceramic coatings in Ti-Si-C system by argon arc depositing[J]. Transactions of the China Welding Institution, 2017, 38(5): 108-111.[3] Hadji Y, Tricoteaux A, Ben Ghorbal M G,et al. Microstructure and microindentation of Ti3SiC2-Titanium filler brazed joints by tungsten inert gas (TIG) process[J]. Ceramics International, 2017, 43(9): 7290-7294.[4] 宋思利, 邹增大, 王新洪, 等. 多层氩弧熔敷含TiC颗粒增强涂层的微观组织及耐磨性能[J]. 焊接学报, 2007, 28(4): 33-37.Song Sili, Zou Zengda, Wang Xinhong,et al. Microstructure and wear resisting property of TiC particle reinforced coatings claded by TIG welding with multiple layer[J]. Transactions of the China Welding Institution, 2007, 28(4): 33-37.[5] Kero I, Tegman R, Antti M L. Effect of the amounts of silicon on the in situ synthesis of Ti3SiC2based composites made from TiC/Si powder mixtures[J]. Ceramics International, 2010, 36(1): 375-379.[6] Tong X H, Okano T, Ikeki T,et al. Synthesis and high temperature mechanical properties of Ti3SiC2/SiC composites[J]. Journal of Materials Science, 1995, 30(12): 3087-3090.[7] Yang J, Pan L M, Gu W,et al. Oxidation behavior and kinetics of in situ (TiB2+TiC)/ Ti3SiC2composites in air[J]. Ceramics International, 2012, 38(1): 159-168.[8] 梁英教, 车荫唱. 无机物热力学数据手册[M]. 沈阳: 东北大学出版社, 1993.[9] Du Y, Schuster J C. Experimental investigation and thermodynamic calculation of the titanium-silicon-carbon system[J]. Journal of the American Ceramic Society, 2000, 83(1): 197-203.
|