高级检索

微弧氧化处理改善7N01-T5铝合金搅拌摩擦焊接头的耐蚀性能

刘万辉, 刘文彬, 鲍爱莲

刘万辉, 刘文彬, 鲍爱莲. 微弧氧化处理改善7N01-T5铝合金搅拌摩擦焊接头的耐蚀性能[J]. 焊接学报, 2013, (1): 29-32.
引用本文: 刘万辉, 刘文彬, 鲍爱莲. 微弧氧化处理改善7N01-T5铝合金搅拌摩擦焊接头的耐蚀性能[J]. 焊接学报, 2013, (1): 29-32.
shu
LIU Wanhui, LIU Wenbin, BAO Ailian. Improvement of corrosion resistance of friction stir welded joint of 7N01-T5 aluminum alloy by micro-arc oxidation[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (1): 29-32.
Citation: LIU Wanhui, LIU Wenbin, BAO Ailian. Improvement of corrosion resistance of friction stir welded joint of 7N01-T5 aluminum alloy by micro-arc oxidation[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (1): 29-32.
shu

微弧氧化处理改善7N01-T5铝合金搅拌摩擦焊接头的耐蚀性能

  • 1.

    哈尔滨工程大学材料科学与化学工程学院, 哈尔滨 150001;黑龙江科技学院材料科学与工程学院, 哈尔滨 150027

  • 2.

    哈尔滨工程大学材料科学与化学工程学院, 哈尔滨 150001

  • 3.

    黑龙江科技学院材料科学与工程学院, 哈尔滨 150027

Improvement of corrosion resistance of friction stir welded joint of 7N01-T5 aluminum alloy by micro-arc oxidation

  • 1.

    College of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin 150001, China;College of Materials Science and Technology, Heilongjiang Institute of Science and Technology, Harbin 150027, China

  • 2.

    College of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin 150001, China

  • 3.

    College of Materials Science and Technology, Heilongjiang Institute of Science and Technology, Harbin 150027, China

摘要

    摘要
  • 摘要: 利用微弧氧化技术在7N01-T5铝合金搅拌摩擦焊(FSW)接头表面制备陶瓷涂层.通过SEM和XRD技术测试微弧氧化涂层的微观形貌、物相组成等,并采用中性盐雾试验研究微弧氧化及封孔处理对焊接接头耐蚀性能的影响.结果表明,微弧氧化可在FSW接头区域生成均匀的陶瓷涂层;陶瓷涂层表面残留许多火山口状放电微孔和熔融烧结痕迹,并且主要由α-Al2O3与γ-Al2O3两相构成;微弧氧化涂层具有较好耐腐蚀性,沸水封孔能生成水合氧化铝,使孔壁膨胀、孔径变小,进一步增强涂层的耐蚀能力,经96 h盐雾腐蚀后的单位面积失重量仅为2.6 mg.
    Abstract: The ceramic coatings were prepared on surface of friction stir welded joint of 7N01-T5 aluminum alloy by micro arc oxidation technology. The morphology and phase constituent of the micro arc oxidation coatings were studied by SEM,XRD. The corrosion resistance of the friction stir welded joint oxidized and sealed was tested through the neutral salt spray (NSS) test. The results show that micro arc oxidation coating formed on the FSW joint is uniform,and there are many discharge micro-porous like crater and melting,sintering traces on the surface,and which are mainly composed of α-Al2O3 and γ-Al2O3 phase. Micro arc oxidation ceramic coating has excellent corrosion resistance. Boiling water seal treatment can generate a hydrated alumina, which makes the hole wall inflated and the pore size decreaed, the corrosion resistance of the coatings can be greatly enhanced, and the weight loss is only 2.6 mg after enduring 96 h in NSS test.
    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献(13)

  • 期刊类型引用(8)

    1. 马殿响，杜建国，樊超，马翔宇，李靖飞，孟璇. 基于Q420GJ钢丝极电渣焊接头工艺试验及数值仿真. 中国机械. 2023(21): 42-46 . 百度学术
    2. 许鑫，黎明. 焊接参数对钢板对接坡口焊温度场与残余应力的影响分析. 常州工学院学报. 2019(04): 6-12+33 . 百度学术
    3. 李金华，李力，丁韦，高振坤，宋宏图，胡玉堂. 钢轨电渣焊接方法及工艺研究. 铁道建筑. 2018(09): 118-121+126 . 百度学术
    4. 李金华. 电渣焊技术在钢轨焊接中的应用. 焊接技术. 2017(12): 43-47 . 百度学术
    5. 孙加民，何静，邓德安. 强制冷却对电渣焊接头温度场影响的数值模拟. 焊接学报. 2016(01): 63-66+132 . 本站查看
    6. 孙加民，朱家勇，夏林印，邓德安. 电渣焊接头焊接残余应力与变形的数值模拟. 焊接学报. 2016(05): 23-27+130 . 本站查看
    7. 孙加民，邓德安，叶延洪，何静，夏林印. 用瞬间热源模拟Q390高强钢厚板多层多道焊T形接头的焊接残余应力. 焊接学报. 2016(07): 31-34+38 . 本站查看
    8. 蔡建鹏，孙加民，夏林印，邓德安. Q345钢对接接头残余应力与变形的预测. 焊接学报. 2015(11): 61-64+68+116 . 本站查看

    其他类型引用(5)

    • 资源附件(0)
计量
  • 文章访问数:  233
  • HTML全文浏览量:  1
  • PDF下载量:  89
  • 被引次数: 13
出版历程
  • 收稿日期:  2012-07-31

目录

摘要
HTML全文
    参考文献(0)
    相关文章
    施引文献
    资源附件(0)

    /

    返回文章
    返回

    网站版权 © 焊接杂志社焊接学报编辑部电话：0451-86323218地址：哈尔滨市松北区创新路2077号

    本系统由 北京仁和汇智信息技术有限公司 开发  百度统计