高级检索

6061铝合金表面激光熔覆稀土CeO2+Ni60组织及摩擦磨损性能

王成磊, 高原, 张光耀

王成磊, 高原, 张光耀. 6061铝合金表面激光熔覆稀土CeO2+Ni60组织及摩擦磨损性能[J]. 焊接学报, 2015, 36(7): 13-16.
引用本文: 王成磊, 高原, 张光耀. 6061铝合金表面激光熔覆稀土CeO2+Ni60组织及摩擦磨损性能[J]. 焊接学报, 2015, 36(7): 13-16.
shu
WANG Chenglei, GAO Yuan, ZHANG Guangyao. Microstructure and wear resistanced of deposited rare earth CeO2+Ni60 alloys coatings on 6061 Al alloys by laser cladding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(7): 13-16.
Citation: WANG Chenglei, GAO Yuan, ZHANG Guangyao. Microstructure and wear resistanced of deposited rare earth CeO2+Ni60 alloys coatings on 6061 Al alloys by laser cladding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(7): 13-16.
shu

6061铝合金表面激光熔覆稀土CeO2+Ni60组织及摩擦磨损性能

  • 1.

    桂林电子科技大学 机电工程学院, 桂林 541004;桂林电子科技大学 材料科学与工程学院, 桂林 541004

  • 2.

    桂林电子科技大学 材料科学与工程学院, 桂林 541004

基金项目: 国家自然科学基金青年基金资助项目(51201043);国家自然科学基金资助项目(51264007);广西科学研究与技术开发科技攻关计划资助项目(桂科攻12118020-2-2-1);广西信息材料重点实验室资助项目(桂科能1210908-07-Z);广西信息材料重点实验室资助项目(1210908-214-Z)

Microstructure and wear resistanced of deposited rare earth CeO2+Ni60 alloys coatings on 6061 Al alloys by laser cladding

  • 1.

    Electromechanical Engineering College, Guilin University of Electronic Technology, Guilin 541004, China;School of Materials Science and Engineering, Guilin University of Electronic Technology, Guilin 541004, China

  • 2.

    School of Materials Science and Engineering, Guilin University of Electronic Technology, Guilin 541004, China

摘要

    摘要
  • 摘要: 为提高铝合金的表面性能,利用激光熔覆技术在6061铝合金表面制备了添加稀土CeO2的Ni60熔覆层, 并通过金相显微镜、SEM、显微维氏硬度计和摩擦磨损试验机等设备研究了CeO2对Ni60熔覆层组织结构、硬度及摩擦磨损性能的影响. 结果表明,加入2%的CeO2可有效地减少熔覆层中的裂纹、孔洞和夹杂物,促进晶粒细化,提高熔覆层的组织均匀性、表面硬度及耐磨损性能;在相同磨粒磨损条件下,CeO2+Ni60熔覆层的耐磨性是铝合金的7.1倍,是Ni60熔覆层的1.6倍;Ni60熔覆层可以显著降低铝合金表面摩擦系数,而添加稀土CeO2能提高Ni60熔覆层的摩擦系数稳定性,从而改善CeO2+Ni60熔覆层的耐磨性能.
    Abstract: To improve the surface properties of aluminum alloy, Ni60 alloy cladding layer containing rare earth CeO2 were prepared on the surface of 6061 aluminum alloy by laser cladding. The effects of rare earth CeO2 on the microstructure, microhardness and tribological properties of Ni60 alloys coatings were investigated by means of metalloscope, SEM, micro-hardness test, friction and wear test machine. The results show that the cracks, holes and inclusion in the coatings are reduced with the addition of 2% CeO2, the grain becomes thin, the microstructure uniformity is improved, and the hardness and wear resistance of the coatings increases. Under the same abrasive wear conditions, the wear resistance of CeO2+Ni60 cladding layer is 7.1 times as that of untreated aluminum alloy, and 1.6 times of Ni60 cladding layer. Ni60 cladding layer can significantly reduce the friction coefficient of aluminum alloy, and the CeO2+Ni60 cladding layer can improve the stability of friction coefficient and thus improve wear resistance. The stability of friction coefficient can be improved with the addition of CeO2, thereby the wear resistance of CeO2+Ni60 cladding layer can be improved.
    • HTML全文
    • 参考文献(7)
  • [1] 庄忠良, 宋 刚, 祝美丽, 等. 激光-MIG复合热源铝合金层间堆积快速成形[J]. 焊接学报, 2013, 34(5): 71-73. Zhuang Zhongliang, Song Gang, Zhu Meili, et al. Rapid prototyping of aluminum alloy with vertical deposition by laser-arc hybrid heat source[J]. Transactions of the China Welding Institution, 2013, 34(5): 71-73.
    [2] Li Zhanming, Zhu Youli, Xin Yi. Influence of ultrasonic impact treatment on fatigue properties of 2Al2 aluminum alloy welded joints[J]. Journal of Aeronautical Materials, 2011, 31(2): 28-32.
    [3] 乔 虹, 李庆棠, 符寒光, 等. 激光熔覆原位合成陶瓷相增强铁基熔覆层的组织和性能[J]. 焊接学报, 2015, 36(1): 67-69. Qiao Hong, Li Qingtang, Fu Hanguang, et al. Microstructure and properties of in-situ synthesized ceramic phase reinforced Fe-based coating by laser cladding[J]. Transactions of the China Welding Institution, 2015, 36(1): 67-69.
    [4] 李嘉宁, 巩水利, 李怀学, 等. TA15钛合金激光非晶-纳米晶增强镍基涂层的组织结构及耐磨性[J]. 焊接学报,2014, 35(10): 57-60. Li Jianing, Gong Shuili, Li Huaixue, et al. Microstructure and wear resistance of laser amorphousnanocrystals reinforced Ni-based coating on TA15 titanium alloy[J]. Transactions of the China Welding Institution, 2014, 35(10): 57-60.
    [5] 蔡航伟, 高 原, 马志康, 等. 钨钼钇等离子共渗工艺及渗层组织的研究[J]. 表面技术, 2012, 41(2): 16-19. Cai Hangwei, Gao Yuan, Ma Zhikang, et al. Research on W-Mo-Y plasma surface alloying process and microstructure of alloying layer[J]. Surface Technology, 2012, 41(2): 16-19.
    [6] 罗冬雪, 薛 鹏, 薛松柏, 等. 稀土元素Nd对Sn-Zn-Ga无铅钎料组织及性能的影响[J]. 焊接学报, 2013, 34(6): 57-60. Luo Dongxue, Xue Peng, Xue Songbai, et al. Effects of Nd on microstructure and properties of Sn-Zn-Ga lead-free solder[J]. Transactions of the China Welding Institution, 2013, 34(6): 57-60.
    [7] 张光耀, 王成磊, 高 原, 等. 稀土La2O3对6063Al激光熔覆Ni基熔覆层微观结构的影响[J]. 中国激光, 2014, 41(11): 1103001. Zhang Guangyao, Wang Chenglei, Gao Yuan, et al. Effect of rare earth La2O3 on the microstructure of laser cladding Ni-based coatings on 6063Al alloys[J]. Chinese Journal of Lasers, 2014, 41(11): 1103001.
    • 相关文章
    • 施引文献
    • 资源附件(0)
计量
  • 文章访问数:  271
  • HTML全文浏览量:  3
  • PDF下载量:  100
  • 被引次数: 0
出版历程
  • 收稿日期:  2013-12-18

目录

摘要
HTML全文
    参考文献(7)
    相关文章
    施引文献
    资源附件(0)

    /

    返回文章
    返回

    网站版权 © 焊接杂志社焊接学报编辑部电话：0451-86323218地址：哈尔滨市松北区创新路2077号

    本系统由 北京仁和汇智信息技术有限公司 开发  百度统计