拘束焊对接接头的平面外拘束力
Out-of-plane Restraint of Butt Joint Under Restraint Welding
-
摘要: 合理采用拘束焊和反变形工艺措施,能有效地消除焊接残余变形,但是由于焊接结构应力应变场的复杂性,使得精确地计算拘束力、拘束长度和反变形很困难。本文应用弹塑性弯曲理论提出了一种消除焊接对接接头角变形的平面外拘束力的计算方法,计算了极限拘束力、拘束长度和反变形的量值,并通过试验验证了方法的有效性。Abstract: It can remove residual welding deformation effectively to use technology of restraint welding and reverse deformation. But, it is very difficult to calculate values of restraint, restraint length and reverse deformation accurately, because of the complication of stress and strain fields in welded structure. By the theory of elasto-plastic bend, this paper prowents a method to calculate out-of-plane restraint and reverse deformation that are made use of to remove angle deformation in butt joints. The values of limit restraint, restraint length and reverse deformation have been calculated. The results of test show that the calculation method is effective.
-
Keywords:
- butt joint /
- angle deformation /
- restraint welding /
- elasto-plastic bend theory
-
-
期刊类型引用(5)
1. 张仁航,李帅贞,汪认,何建英,许骏,孙晓红,冷康龙. 全熔透与部分熔透十字接头疲劳性能对比分析. 金属加工(热加工). 2021(03): 45-48 . 百度学术
2. 周松,查涛,黄研清,安金岚,回丽,王磊. 典型高速列车用6N01铝合金焊接接头的微观组织及疲劳性能. 中国有色金属学报. 2021(05): 1253-1260 . 百度学术
3. 杜亚芳,王东坡,刘秀国,龚宝明,邓彩艳. T形接头承载角焊缝根部裂纹扩展角度. 焊接学报. 2021(09): 21-27+98 . 本站查看
4. 张军,张凤梅,周韶泽. 惯性载荷作用下结构应力法焊接结构抗疲劳性能研究. 大连交通大学学报. 2019(01): 40-45 . 百度学术
5. 王苹,米莉艳,于谊飞,董平沙. 7N01铝合金十字接头抗疲劳设计. 焊接学报. 2019(10): 20-24+161-162 . 本站查看
其他类型引用(5)
计量
- 文章访问数: 360
- HTML全文浏览量: 6
- PDF下载量: 89
- 被引次数: 10