\n \n \n \n \n 摇动电弧窄间隙焊炬位置的被动视觉检测方法 \n \n \t \n\t\n \n \n \n \n \n \n \n \n \n \n \n \n\t \n \n \n \n \n
\n
高级检索
\n
\n \n
\n
\n
\n
\n
\n \n \n
\n \n
\n \n
\n

摇动电弧窄间隙焊炬位置的被动视觉检测方法

A passive vision method for detecting torch position in swing arc narrow-gap welding

\n \n \n \n \n \n
\n \n
\n \n \n
    \n \n \n
  • \n
    \n \n
    \n 摘要: \n 针对窄间隙焊接烟尘、弧光及飞溅等干扰引起焊接图像灰度分布不均,进而导致焊炬位置检测精度降低的问题,提出一种基于RANSAC双极性梯度极值(RANSAC bipolar gradient extrema, RANSAC-BGE)的焊丝图像分割与焊炬位置检测方法.该方法建立电弧位于坡口侧壁或中心的图像采集机制,研究焊丝ROI(region of interest)窗口尺寸对焊丝中心位置检测精度的影响规律,通过双极性梯度极值提取与双重极值过滤剔除由焊接干扰引起的异常边缘点,并基于RANSAC重构焊丝边缘以检测焊炬位置.窄间隙焊接试验结果表明,RANSAC-BGE方法检测焊炬位置的标准差为0.058 mm,优于常规阈值方法,检测值极差为0.345 mm,小于0.35 mm.所提方法有效克服了常规阈值分割方法在焊丝图像分割中的局限性,为窄间隙焊缝偏差的精确检测与智能跟踪控制提供了技术支撑. \n

     

    \n \n
    \n \n
    \n
    \n \n
    \n Abstract: \n To address the problem that interferences such as fume, arc light, and spatter in narrow-gap welding cause uneven grayscale distribution in welding images and consequently reduce torch position detection accuracy, a wire image segmentation and torch position detection method was proposed based on RANSAC bipolar gradient extrema (RANSAC-BGE). In this method, an image acquisition mechanism for the arc located at the groove sidewalls or center was established; the influence pattern of the wire region of interest (ROI) window size on the detection accuracy of the wire center position was investigated; outlier edge points caused by welding interferences were eliminated through bipolar gradient extrema extraction and dual extremum filtering, and the wire edges were reconstructed based on RANSAC to detect the torch position. Narrow-gap welding experimental results show that the standard deviation of the torch position detected by the RANSAC-BGE method is 0.058 mm, which is superior to conventional threshold methods; the range of the detected values is 0.345 mm, below 0.35 mm. The proposed method effectively overcomes the limitations of conventional threshold segmentation methods in wire image segmentation, providing technical support for accurate weld seam deviation detection and intelligent tracking control in narrow-gap welding. \n

     

    \n \n
    \n \n
    \n
  • \n
    \n \n \n
  • \n
  • \n \n \n \n \n
  • \n \n
  • \n \n \n \n \n
  • \n
  • \n \n \n \n \n
  • \n
  • \n \n \n \n \n
  • \n \n \n \n \n \n
  • \n
  • \n \n \n
\n \n
\n
\n \n
\n \n \n
\n
\n \n \n \n \n\t \n \n\t \n\t
\n\t\t \n\t\t
\n\t\t\t
\n\t\t\t\t \n\t\t\t
\n\t\t\t \n\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

\n\t\t\t\t\t

\n\t\t\t\t
\n\t\t\t
\n\t\t\t \n\t\t\t

\n\t\t\t\t/ \n\t\t\t

\n\t\t\t \n\t\t\t
\n\t\t\t\t下载:  \n\t\t\t\t全尺寸图片 幻灯片 \n\t\t\t
\n\t\t
\n\t\t \n\t\t
\n\t\t\t
\n\t\t\t\t \n\t\t\t
\n\t\t\t
\n\t\t\t\t
    \n \n \n\t\t\t\t
\n\t\t\t
\n\t\t\t
\n\t\t\t\t \n\t\t\t
\n\t\t
\n\t\t \n\t\t
\n\t\t\t 返回文章 \n\t\t\t \n\t\t
\n\t
\n \n\t \n\t \n\t \n\t \n\t
\n\t\t
\n\t\t\t返回 \n\t\t
\n\t
\n\t \n\t
\n\t
\n\t\t\t \n\t
\n\t
\n\t\t\t \n\t\t\t\t \n\t\t\t \n\t
\n\t
    \n\t \n\t
\n\t
\n\t \n\t\t\t\t \n\t\t\t \n\t
\n\t
\n \n\n\n \n \n\t
\n\t\t
\n\t\t\t \n\t\t
\n\t\t \n\t
\n
\n \n \n \n \n