高级检索
于航, 侴树国, 王慧源, 王煜成, 魏建博, 姜淑华. 氧对00Cr13Ni5Mo熔敷金属组织和韧性的影响[J]. 焊接学报, 2014, 35(6): 109-112.
引用本文: 于航, 侴树国, 王慧源, 王煜成, 魏建博, 姜淑华. 氧对00Cr13Ni5Mo熔敷金属组织和韧性的影响[J]. 焊接学报, 2014, 35(6): 109-112.
YU Hang, CHOU Shuguo, WANG Huiyuan, WEI Jianbo, JIANG Shuhua. Effect of oxygen on toughness and microstructure of 00Crl3Ni5Mo deposited metal[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(6): 109-112.
Citation: YU Hang, CHOU Shuguo, WANG Huiyuan, WEI Jianbo, JIANG Shuhua. Effect of oxygen on toughness and microstructure of 00Crl3Ni5Mo deposited metal[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(6): 109-112.

氧对00Cr13Ni5Mo熔敷金属组织和韧性的影响

Effect of oxygen on toughness and microstructure of 00Crl3Ni5Mo deposited metal

  • 摘要: 文中研究了MAG焊保护气体氧含量变化对00Cr13Ni5Mo熔敷金属中氧化物夹杂类型、尺寸、数量、分布和残余奥氏体、逆变奥氏体含量以及冲击韧性的影响.结果表明,Si-Mn-O,Si-Mn-Al-O复合氧化物夹杂是导致00Cr13Ni5Mo熔敷金属冲击韧性下降的主要原因.氧化物夹杂对00Cr13Ni5Mo熔敷金属回火过程中产生的逆变奥氏体具有抑制作用,随着氧化物夹杂的增加,逆变奥氏体含量呈减少趋势.

     

    Abstract: The influence of oxygen content in shielding gas during MAG welding on the type, size, quantity, and distribution of oxide inclusion and the content of residual austenite, reversed austenite and impact toughness of 00Crl3Ni5Mo deposited metal was investigated. It was found that Si-Mn-O, Si-Mn-Al-0 composite oxide inclusions were the main reason for the degradation of impact toughness of 00Crl3Ni5Mo deposited metal. The oxide inclusions in 00Cr13Ni5Mo deposited metal could inhibit the generation of reversed austenite during tempering. With the increase of oxide inclusions, the content of reversed austenite decreased.

     

/

返回文章
返回