高级检索
王智祥, 张瑶, 张继祥. 2205DSS焊接接头腐蚀疲劳性能分析[J]. 焊接学报, 2014, 35(5): 67-70.
引用本文: 王智祥, 张瑶, 张继祥. 2205DSS焊接接头腐蚀疲劳性能分析[J]. 焊接学报, 2014, 35(5): 67-70.
WANG Zhixiang, ZHANG Yao, ZHANG Jixiang. Corrosion fatigue performance of 2205 DSS welded joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(5): 67-70.
Citation: WANG Zhixiang, ZHANG Yao, ZHANG Jixiang. Corrosion fatigue performance of 2205 DSS welded joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(5): 67-70.

2205DSS焊接接头腐蚀疲劳性能分析

Corrosion fatigue performance of 2205 DSS welded joints

  • 摘要: 对川东船厂制造化学品船所用的国产2205DSS常用焊接接头在模拟海水环境中的腐蚀疲劳性能进行了试验研究.通过Origin软件对试验数据进行非线性拟合得到了环境温度分别在24,30和40℃、加载应力比为0.1、加载频率为20 Hz条件下的腐蚀疲劳寿命S-N曲线,得到焊接接头在该环境下的疲劳极限,建立了有温度参数表示的S-N数学模型.结果表明,在模拟海水中焊接接头发生腐蚀疲劳断裂的位置在母材区,环境温度升高对低应力水平作用下的试件疲劳寿命有明显影响.

     

    Abstract: The corrosion fatigue performance of welded joints of homemade 2205 duplex stainless steel (DSS) has been studied in simulated seawater environment. The S-N curves of corrosion fatigue life were obtained at different environment temperatures of 24,30 and 40℃,as the stress ratio is 0.1 and the loading frequency is 20 Hz. The experimental data shows that the low stress level had a significant effect on the fatigue life as environment temperature rising. Then an S-N mathematical model with temperature was established and welded joint fatigue limit was obtained in simulated seawater environment.

     

/

返回文章
返回