高级检索
陈希章, 陈善本. 焊缝三维信息计算精度分析及试验方法[J]. 焊接学报, 2009, (3): 45-48.
引用本文: 陈希章, 陈善本. 焊缝三维信息计算精度分析及试验方法[J]. 焊接学报, 2009, (3): 45-48.
shu
CHEN Xizhang, CHEN Shanben. Accuracy analysis and experimental method on three-dimensional information computing of weld seam[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (3): 45-48.
Citation: CHEN Xizhang, CHEN Shanben. Accuracy analysis and experimental method on three-dimensional information computing of weld seam[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (3): 45-48.
shu

焊缝三维信息计算精度分析及试验方法

Accuracy analysis and experimental method on three-dimensional information computing of weld seam

    摘要
  • 摘要: 双目视觉技术模拟人双眼观察世界的功能,在焊接领域可用来模拟焊工对焊件的观察,计算焊缝的三维信息.将两台工业摄像机安装在弧焊机器人末端形成手眼系统是双目视觉在该领域的典型应用.文中建立了视觉误差分析模型,分析了视觉系统配置对视觉计算的影响,被检测焊缝在有效视场内的摆放姿态及其与传感器相互位置对精度的影响,在理论分析的基础上设计试验验证了理论分析的结果.分析并试验验证了机器人精度包括其本身的重复精度和工具中心点标定精度对计算结果的影响.结果表明,机器人重复定位精度对视觉计算的影响标准误差不大于0.3 mm;而当工具中心点标定误差大于1 mm时,需要对机器人进行重新标定。

     

    Abstract: Binocular vision technology which simulates the function of the human eyes to observe the world is used to compute the three-dimensional information of weld seam in the welding field;two cameras as binocular vision are fixed on the end effecter of the welding robot.The accuracy analysis model of vision computing is constructed.The effect of vision system structure on vision computing, and the effect of the position of weld seam and the relative pose of weld seam between vision sensors on accuracy are analyzed.An experiment base on model theory is designed to validate the model analysis results, which show the correctness of the constructed model.The effects of repeatability positioning accuracy and TCP calibration error of welding robot for visual computing are also analyzed and tested.The results show that the effect of the former factor is not bigger than 0.3 mm, but the re-calibration is necessary when the calibrated error of TCP is bigger than 1 mm.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回