高级检索
王赫莹, 李德元, 马骏. 热镀锌锅用钢的腐蚀机理分析及焊接对策的制定[J]. 焊接学报, 2007, (4): 81-84.
引用本文: 王赫莹, 李德元, 马骏. 热镀锌锅用钢的腐蚀机理分析及焊接对策的制定[J]. 焊接学报, 2007, (4): 81-84.
WANG Heying, LI Deyuan, MA Jun. Analysis of corrosion process and its welding countermeasure of steel used for galvanizing vessel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (4): 81-84.
Citation: WANG Heying, LI Deyuan, MA Jun. Analysis of corrosion process and its welding countermeasure of steel used for galvanizing vessel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (4): 81-84.

热镀锌锅用钢的腐蚀机理分析及焊接对策的制定

Analysis of corrosion process and its welding countermeasure of steel used for galvanizing vessel

  • 摘要: 探讨了热镀锌锅用钢中的C,Si元素含量对其腐蚀过程的影响。利用SEM对其在锌液中形成的腐蚀层进行组织形貌观察及相结构分析。结果表明,ζ相优先在Fe/Zn界面形成。随着钢中C,Si元素含量的增高,腐蚀层中Г相消失,δ相区变薄,形成异常生长的ζ相,腐蚀速率加快。基于此,利用焊接材料中氧化性物质自氧化烧损C,Si元素的作用,研制了一种与08Cu热镀锌锅用钢相匹配的低碳、低硅焊接材料。焊缝化学成分取样分析结果表明,焊缝中的C,Si元素含量低于母材中的含量,使该焊接材料具有良好的耐锌液腐蚀性能。

     

    Abstract: The effect of C and Si content on the corrosion process in the steel used for galvanizing vessel was researched.The microstructure and phase constitution of the corrosion layer formed in the liquid zinc was analyzed by SEM.It has been found that the ζ phase firstly formed at the interface between Fe and Zn.With C and Si content increasing, the Гphase disappears, and the δphase zone also becomes thinner, and the ζphase with rapidly growing feature forms.At the same time the corrosion rate will increase obviously. Based on these studies, a new welding consumable used for the 08Cu steel, which is used for the manufacture of the galvanizing vessel, was developed.The harmful C and Si in this consumable were consumed by the self-oxidation action of some oxidants.This welding consumable can provide a weld metal with lower C and Si content and satisfactory corrosion resistant property.

     

/

返回文章
返回