高级检索
韩宗杰, 薛松柏, 王俭辛, 陈旭. QFP器件半导体激光钎焊焊点力学性能和显微组织[J]. 焊接学报, 2006, (10): 41-44.
引用本文: 韩宗杰, 薛松柏, 王俭辛, 陈旭. QFP器件半导体激光钎焊焊点力学性能和显微组织[J]. 焊接学报, 2006, (10): 41-44.
shu
HAN Zong-jie, XUE Song-bai, WANG Jian-xin, CHEN Xu. Mechanical properties and microstructures of QFP micro-joints soldered with diode-laser soldering system[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (10): 41-44.
Citation: HAN Zong-jie, XUE Song-bai, WANG Jian-xin, CHEN Xu. Mechanical properties and microstructures of QFP micro-joints soldered with diode-laser soldering system[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (10): 41-44.
shu

QFP器件半导体激光钎焊焊点力学性能和显微组织

Mechanical properties and microstructures of QFP micro-joints soldered with diode-laser soldering system

    摘要
  • 摘要: 采用半导体激光软钎焊和红外再流焊方法对QFP32和QFP48两种不同结构尺寸的器件引线进行了钎焊性试验,针对使用Sn-Pb和Sn-Ag-Cu两种不同成分钎料所得到的QFP器件焊点,采用微焊点强度测试仪研究了其抗拉强度的分布规律,并采用扫描电子显微镜分析了焊点断口的显微组织特征。结果表明,同种QFP器件焊点的抗拉强度,半导体激光软钎焊焊点明显高于红外再流焊焊点抗拉强度,QFP48器件焊点抗拉强度明显高于QFP32器件焊点的抗拉强度。半导体激光焊QFP器件焊点的断裂方式为韧性断裂,红外再流焊焊点断裂方式兼有脆性断裂和韧性断裂的特征。

     

    Abstract: Soldering experiments of two kinds of devices QFP32 and QFP48 were carried out using diode-laser soldering system and IR reflow soldering method, and the distribution regulations of the tensile strength of QFP micro-joints with Sn-Pb solder and Sn-Ag-Cu lead-free solder were studied by STR-1000 micro-joints tester, and the characteristics of fracture microstructures of micro-joints were also analyzed by SEM. The results indicate that tensile strength of QFP micro-joints soldered with laser soldering system is larger than that with IR reflow soldering method, and tensile strength of QFP48 micro-joints is larger than that of QFP32 micro-joints. Fracture mechanism of micro-joints soldered with laser soldering system is toughness fracture, while fracture mechanism of micro-joints soldered with IR reflow soldering method includes brittle fracture and toughness fracture.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回