高级检索
刘俊玲, 郭治安. 涂层的感应重熔工艺[J]. 焊接学报, 1994, (1): 1-7.
引用本文: 刘俊玲, 郭治安. 涂层的感应重熔工艺[J]. 焊接学报, 1994, (1): 1-7.
Liu Junling, Guo Zhian. Induction-fuseability of coatings[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1994, (1): 1-7.
Citation: Liu Junling, Guo Zhian. Induction-fuseability of coatings[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1994, (1): 1-7.

涂层的感应重熔工艺

Induction-fuseability of coatings

  • 摘要: 本文采用磁性测试,差热分析,扫描电镜,X射线衍射等现代化测试手段,对国产自熔合金粉末Fe60和Ni60喷涂层的感应重熔工艺性进行了大量试验研究,得山试验采用的自熔合金粉末是磁性材料,喷涂层的磁性质是影响感应重熔工艺性的关键因素的结论。提出涂层感应重熔工艺性取决于试件上温度场分布,而试件上温度场分布主要取决于涂层材料磁性质的观点。

     

    Abstract: The induction-fuseability of the coatings of domestic self-fusing alloy pow-der named Fe60 and Ni60 is studied with a series of modern methods of magnetic test,thermoeleetrical effect analysis,scanning electron microscope and x-ray diffraction.The results show that both kinds of powder are paramagnctic materials,and magnetic properties of the powder are the vital factors which influence the induction-fuseability seriously.The viewpoint is put forword that the induction-fuseability of the coatings depends on the field of tempcrature on the test pieces which depends mainly on the magnetic property of coating materials.

     

/

返回文章
返回