高级检索
霍立兴, 张玉凤, 陈长江. 某些制造因素对焊接构件强度的影响[J]. 焊接学报, 1988, (1): 51-58.
引用本文: 霍立兴, 张玉凤, 陈长江. 某些制造因素对焊接构件强度的影响[J]. 焊接学报, 1988, (1): 51-58.
Huo Lixing, Zhang Yufeng, Chen Changjiang. THE EFFECT OF SOME MANUFACTURING FACTORS ON THE STRENGTH OF WELDED STRUCTURES[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1988, (1): 51-58.
Citation: Huo Lixing, Zhang Yufeng, Chen Changjiang. THE EFFECT OF SOME MANUFACTURING FACTORS ON THE STRENGTH OF WELDED STRUCTURES[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1988, (1): 51-58.

某些制造因素对焊接构件强度的影响

THE EFFECT OF SOME MANUFACTURING FACTORS ON THE STRENGTH OF WELDED STRUCTURES

  • 摘要: 采用全面屈服准则通过实验直接研究和评定了室温下焊缝匹配、应变时效和热处理对焊接构件强度的影响。试验结果表明,对于A131钢和A537钢来说,高匹配焊缝金属增加得到全面屈服的可能性,这意味着针对母材适当地选择焊缝金属可得到较大的焊缝允许缺陷或极限裂纹尺寸acr值。同时因为一些因素,象应变时效和热处理能改变焊缝匹配程度,因而它们也将影响焊缝的acr值。

     

    Abstract: The effect of weld matching, strain ageing and postweld heat treatment on the strngth of wlded structures are investigated and appraised directly by experiments made in accordance with the General Yielding Criterion at room temperature. The test results show that for A313 and A537 steels overmatching of weld metal increases the possibility of having a general yielding. This means that p oper matching of the weld metal with the parent metal may help tolerate larger weld defects or critical crack siz acr. Certain factors, such ass train ageing and heat treatment,an change the degre of weld matching and thus affect acr.

     

/

返回文章
返回