高级检索
李俊岳, 蔡国余, 朱任中, 廉金瑞. 激光显示焊接气流成象原理的研究[J]. 焊接学报, 1983, (3): 129-138.
引用本文: 李俊岳, 蔡国余, 朱任中, 廉金瑞. 激光显示焊接气流成象原理的研究[J]. 焊接学报, 1983, (3): 129-138.
Li Junyue, Cai Guoyn, Zhu Renzhong, Lian Jinrui. A STUDY ON THE PRINCIPLE OF IMAGE FORMATION OF WELDING GAS FLOW BY LASER DISPLAY[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1983, (3): 129-138.
Citation: Li Junyue, Cai Guoyn, Zhu Renzhong, Lian Jinrui. A STUDY ON THE PRINCIPLE OF IMAGE FORMATION OF WELDING GAS FLOW BY LASER DISPLAY[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1983, (3): 129-138.

激光显示焊接气流成象原理的研究

A STUDY ON THE PRINCIPLE OF IMAGE FORMATION OF WELDING GAS FLOW BY LASER DISPLAY

  • 摘要: 本文用Y型坡口拘束抗裂试验等方法,评定了Mn-Mo-Nb型压力容器用低合金高强钢消除应力(SR)裂纹的敏感性,并使用扫描电镜、X光结构分析、α粒子径迹照相等综合测试技术,研究了微量硼对Mn-Mo-Nb钢SR裂纹敏感性的影响。文中指出,微量硼明显地提高Mn-Mo-Nb型钢SR裂纹敏感性,其影响程度主要取决于碳硼化物在焊接热影响区粗晶晶界的析出形态和集聚行为,以及由此而引起的热影响区粗晶区高温蠕变延性的降低程度。该结论被含硼钢SR裂纹的独特形貌所证实。本文在探讨微最硼对Mo-Mn-Nb钢SR裂纹形成机制的基础上,提出了控制"硼相"和防止SR裂纹产生的措施。

     

    Abstract: Displaying welding gas flow by laser is a new method developed in recent years.Study on the principle of image formation is necessary because of the complexity of the image fringes.In this paper the effect of the refractive index on image formation has been studied with experimental method,and shown that this display method issensitive in the abrupt region of the refractive index.Interface of the gas flow is clearly displayed,thus a gas flow pattern is formed,and the flow field behavior can be determined.The characteristics of the distribution of gas flow diffractive fringes have also been studied.Bright fringe appears on the side of the larger refractive index of the gas flow interface,while dark one appears on the side of smaller refractive index.Hence it is possible to determine the gas on either side.Guided by these principles,analysis and determination have been made of the image characteristics of free jetflow,impact flow and electric arc impact flow.On the basis of the study of the effect of the phototaking distance on image formation,the optimum phototaking distance of 1.5-2 m is recommended.

     

/

返回文章
返回