高级检索

旁路耦合微束等离子弧增材制造自适应高度控制系统

樊丁, 李楠, 黄健康, 余淑荣, 袁文

樊丁, 李楠, 黄健康, 余淑荣, 袁文. 旁路耦合微束等离子弧增材制造自适应高度控制系统[J]. 焊接学报, 2019, 40(11): 1-7. DOI: 10.12073/j.hjxb.2019400279
引用本文: 樊丁, 李楠, 黄健康, 余淑荣, 袁文. 旁路耦合微束等离子弧增材制造自适应高度控制系统[J]. 焊接学报, 2019, 40(11): 1-7. DOI: 10.12073/j.hjxb.2019400279
shu
FAN Ding, LI Nan, HUANG Jiankang, YU Shurong, YUAN Wen. Double electrode micro plasma arc additive manufacturing control system based on adaptive height adjustment[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(11): 1-7. DOI: 10.12073/j.hjxb.2019400279
Citation: FAN Ding, LI Nan, HUANG Jiankang, YU Shurong, YUAN Wen. Double electrode micro plasma arc additive manufacturing control system based on adaptive height adjustment[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(11): 1-7. DOI: 10.12073/j.hjxb.2019400279
shu

旁路耦合微束等离子弧增材制造自适应高度控制系统

  • 1.

    兰州理工大学 省部共建有色金属先进加工与再利用国家重点试验室, 兰州 730050;兰州理工大学, 兰州 730050

  • 2.

    兰州理工大学, 兰州 730050

基金项目: 国家自然科学基金项目（51665034）

Double electrode micro plasma arc additive manufacturing control system based on adaptive height adjustment

  • 1.

    State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou University of Technology, Lanzhou 730050, China;Lanzhou University of Technology, Lanzhou 730050, China

  • 2.

    Lanzhou University of Technology, Lanzhou 730050, China

摘要

    摘要
  • 摘要: 在xPC Target实时目标环境下，采用旁路耦合微束等离子弧进行增材堆垛试验，探究最大临界送丝速度、焊炬悬空高度和总电压等过程参数之间的关系.通过数据分析得到了送丝速度与总电压的回归模型，进一步在xPC Target系统中创建变送丝和电压反馈相结合的自适应高度调节控制模型，搭建了基于自适应高度调节的旁路耦合微束等离子弧增材制造控制系统，进行了在台阶形基板上的堆垛成形试验和单墙体零件自适应堆垛试验.结果表明，该控制系统能提高增材制造过程的稳定性；优化堆垛高度方向上的成形路径设计；实现复杂形状基板上金属零件的堆垛成形.
    Abstract: Double electrode micro plasma arc welding was used to carry out the experiments for depositing the weld beads with the maximum deposition rate in xPC Target real-time environment, and the relationships between the process parameters such as the wire feed rate, the torch stand-off distance and the total voltage were investigated. With data analysis, the regression models of the wire feed rate and the total voltage were developed. Furthermore, a self-adaptive height adjustment control model combining the variable wire feed rate and voltage feedback in xPC Target system was created. Consequently, the double electrode micro plasma arc welding additive manufacturing control system based on the self-adaptive height adjustment was developed, and the experiments of depositing on the step shaped substrate and self-adaptive depositing the thin wall parts were carried out. The results show that the control system can improve the stability of the additive manufacturing process; optimize the deposition path design in the height direction; realize depositing the metal parts on the complex shape substrate.
    • HTML全文
    • 参考文献(11)
  • [1] Ding D, Pan Z, Cuiuri D, et al. A practical path planning methodology for wire and arc additive manufacturing of thin-walled structures[J]. Robotics & Computer Integrated Manufacturing, 2015, 34:8-19.
    [2] IvánTabernero, Paskual A, álvarez P, et al. Study on arc welding processes for high deposition rate additive manufacturing[J]. Procedia Cirp, 2018, 68:358-362.
    [3] Ding D, Pan Z, Van D S, et al. Fabricating superior NiAl bronze components through wire arc additive manufacturing[J]. Materials, 2016, 9(8):652-664.
    [4] Geng H, Li J, Xiong J, et al. Optimization of wire feed for GTAW based additive manufacturing[J]. Journal of Materials Processing Technology, 2017, 243:40-47.
    [5] Venturini G, Montevecchi F, Bandini F, et al. Feature based three axes computer aided manufacturing software for wire arc additive manufacturing dedicated to thin walled components[J]. Additive Manufacturing, 2018, 22:643-657.
    [6] Xiong J, Zhang G. Adaptive control of deposited height in GMAW-based layer additive manufacturing[J]. Journal of Materials Processing Technology, 2014, 214(4):962-968.
    [7] Lu Y, Chen S J, Shi Y, et al. Double-electrode arc welding process:principle, variants, control and developments[J]. Journal of Manufacturing Processes, 2014, 16(1):93-108.
    [8] 黄健康, 石玗, 李妍, 等. 双熔化极旁路电弧焊控制系统控制器快速原型实现[J]. 焊接学报, 2010, 31(6):37-40 Hang Jiankang, Shi Yu, Li Yan, et al. Realization of rapid controller prototyping based on DE-GMAW control system[J]. Transactions of China Welding Institution, 2010, 31(6):37-40
    [9] Nikam S H, Jain N K. Three-dimensional thermal analysis of multi-layer metallic deposition by microplasma transferred arc process using finite element simulation[J]. Journal of Materials Processing Technology, 2017, 249:1-33.
    [10] Jhavar S, Jain N K. Development of micro-plasma wire deposition process for layered manufacturing[M]. DAAAM Ietornational Scientific Book, 2014.
    [11] Truong N V. Hardware-in-the-Loop approach to controller design and testing of motion control systems using xPC Target[C]//Proceedings of the International Conference on Intelligent and Advanced Systems. IEEE, 2012:117– 121.
    • 相关文章
    • 施引文献(8)

  • 期刊类型引用(5)

    1. 朱荣涛，刘天新，陶浩天，燕峰，胡素影，马北一，解志文. Al掺杂CoCrNiAlY金属黏结层的高温抗氧化行为研究. 辽宁科技大学学报. 2024(01): 16-24 . 百度学术
    2. 高继文，李永彬，黄晓望. 超声波冲击法对微弧火花沉积涂层性能的影响. 焊接. 2021(02): 52-56+64 . 百度学术
    3. 徐安阳，王晓明，朱胜，韩国峰，赵阳，郭迎春. 电火花沉积电极材料过渡机制及规律. 中国机械工程. 2021(08): 960-966 . 百度学术
    4. 徐安阳，王晓明，赵阳，朱胜，韩国峰. 电火花沉积重熔碾轧修整试验. 中国机械工程. 2020(14): 1741-1746 . 百度学术
    5. 徐安阳，王晓明，朱胜，赵阳，韩国峰. 电火花沉积电极材料过渡形态研究. 电加工与模具. 2019(06): 10-15 . 百度学术

    其他类型引用(3)

    • 资源附件(0)
计量
  • 文章访问数: 
  • HTML全文浏览量: 
  • PDF下载量: 
  • 被引次数: 8
出版历程
  • 收稿日期:  2019-01-12

目录

摘要
HTML全文
    参考文献(11)
    相关文章
    施引文献(8)
    资源附件(0)

    /

    返回文章
    返回

    网站版权 © 焊接杂志社焊接学报编辑部电话：0451-86323218地址：哈尔滨市松北区创新路2077号

    本系统由 北京仁和汇智信息技术有限公司 开发  百度统计