高级检索

活性剂对TC4薄板背反射增效激光焊接成形的影响

王宏宇, 丁瑞, 晁栓, 李乐

王宏宇, 丁瑞, 晁栓, 李乐. 活性剂对TC4薄板背反射增效激光焊接成形的影响[J]. 焊接学报, 2019, 40(2): 73-76. DOI: 10.12073/j.hjxb.2019400045
引用本文: 王宏宇, 丁瑞, 晁栓, 李乐. 活性剂对TC4薄板背反射增效激光焊接成形的影响[J]. 焊接学报, 2019, 40(2): 73-76. DOI: 10.12073/j.hjxb.2019400045
WANG Hongyu, DING Rui, CHAO Shuan, LI Le. Effect of surfactant on TC4 sheet with back reflection induced synergistic laser welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(2): 73-76. DOI: 10.12073/j.hjxb.2019400045
Citation: WANG Hongyu, DING Rui, CHAO Shuan, LI Le. Effect of surfactant on TC4 sheet with back reflection induced synergistic laser welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(2): 73-76. DOI: 10.12073/j.hjxb.2019400045

活性剂对TC4薄板背反射增效激光焊接成形的影响

基金项目: 

国家自然科学基金项目(51372216);江苏省精密与微细制造重点实验室开放基金项目(KFA11250-04)

详细信息
    作者简介:

    王宏宇,男,1974年出生,博士,副教授,硕士研究生导师. 主要从事激光先进制造技术方面的科研和教学工作. 发表论文60余篇. Email: wangdoudou1974@163.com

  • 中图分类号: TG 456.7

Effect of surfactant on TC4 sheet with back reflection induced synergistic laser welding

  • 摘要: 为探索降低钛合金薄板激光X形焊接成形所需能量阈值的途径,较为系统地分析了活性剂的种类、涂覆厚度和涂覆位置对钛合金薄板背反射增效激光焊接成形的影响. 结果表明,不同种类的活性剂的影响不同,其中涂覆NaCl和NaF有利于背反射羽辉效应的形成,而涂覆TiO2时则对其有一定的弱化. 同时,随着活性剂涂覆厚度的增大背反射羽辉效应进一步增强,且NaF相对于NaCl而言对涂覆厚度更加敏感. 此外,在施焊背面涂覆活性剂几乎没有影响. 分析认为,活性剂对钛合金薄板背反射增效激光焊接成形的影响,主要归因于其对激光能量吸收的增益.
    Abstract: In order to explore the way to reduce energy threshold in X-shape welding formation of TC4 sheet, the influence of surfactant type, coating thickness and coating position on back reflection induced synergistic laser welding was systematically analyzed in this paper. The results show that the effect of different kinds of surfactant were different. Among them, coating NaCl and NaF is conducive to the formation of back reflection plume effects, while coating TiO2 has some weak effect. At the same time, the back reflection plume effect was further enhanced the increase of the surfactant coating thickness NaF was more sensitive to the coating thickness than NaCl. In addition, there is little effect when coating surfactant on the back of weld. It is concluded that the effect of surfactant on the back reflection induced synergistic laser welding of TC4 sheet is mainly due to the gain of laser energy absorption.
  • [1] 国家自然科学基金委员会. 机械工程学科发展战略报告(2011−2020)[M]. 北京: 科学出版社, 2010.
    [2]

    Cheng Donghai, Huang Jihua, Lin Haifan, et al. Microstructure and mechanical analysis of Ti-6Al-4V laser butt weld joint[J]. Transactions of the China Welding Institution, 2009, 30(2): 103 − 106

    [3]

    Chen Li, Hu Lunji, Gong Shuili. Mathematical model of the stable full penetration laser welding for titanium alloy sheet[J]. Transactions of the China Welding Institution, 2005, 26(11): 35 − 38

    [4] 程东海, 黄继华, 林海凡, 等. TC4钛合金激光拼焊接头显微组织及力学性能分析[J]. 焊接学报, 2009, 30(2): 103 − 106
    [5]

    Dong Lina, Zhang Jianxun. Research status of heterogeneous gradient feature for laser welded joint of Ti6Al4V alloy[J]. Rare Metal Materials and Engineering, 2013, 42(3): 655 − 660

    [6]

    Gao X L, Zhang L J, Liu J, et al. A comparative study of pulsed Nd:YAG laser welding and TIG welding of thin Ti6Al4V titanium alloy plate[J]. Materials Science & Engineering A, 2013, 259: 14 − 21.

    [7]

    Peter S, Rudolf W, Thomas G, et al. Utilizing laser power modulation to investigate the transition from heat-conduction to deep-penetration welding[J]. Physics Procedia, 2011, 12: 224 − 231.

    [8]

    Sun Hao, Zhang Zhaodong, Liu Liming. Low power laser welding of magnesium alloy with activating flux[J]. Transactions of the China Welding Institution, 2007, 28(4): 49 − 52, 57

    [9] 陈 俐, 胡伦骥, 巩水利. 薄板钛合金激光焊熔透稳定性临界条件的计算[J]. 焊接学报, 2005, 26(11): 35 − 38
    [10] 董丽娜, 张建勋. Ti6Al4V激光焊接接头非均匀梯度特征研究现状[J]. 稀有金属材料与工程, 2013, 42(3): 655 − 660
    [11] 孙 昊, 张兆栋, 刘黎明. 镁合金的低功率激光活性焊[J]. 焊接学报, 2007, 28(4): 49 − 52

    , 57

    [12] 王宏宇. 实现金属薄板单面焊接双面成形的高效激光深熔焊方法: 中国, 201410225961.2[P]. 2014-05-26.
计量
  • 文章访问数:  147
  • HTML全文浏览量:  5
  • PDF下载量:  6
  • 被引次数: 0
出版历程
  • 收稿日期:  2017-10-21

目录

    /

    返回文章
    返回